Sangoma Vega 8.8 Release Notes ------------------------------ This document describes the release changes for the Sangoma Vega series of VoIP Gateways. It is applicable to the Vega 50 Europa, Vega 5000 and Vega 100/200/400 platforms. For Vega 100G/200G/400G platforms please use R11.0 software or higher. ============================================================================= Vega Build R088S059 ------------------- Build Date: 2017-01-02 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 50 VEGAEURO_R088S059.abs 76a5e84cb89b5f9b778f5ada77072c78 Changes ------- POTS JIRA-382 Fixing Vega 50 BRI Noise issue. ============================================================================= Vega Build R088S056 ------------------- Build Date: 2016-11-22 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 50 VEGAEURO_R088S056.abs 787309ace1cf655d6c1937ee67c6a98e New Configuration Items ----------------------- _advanced.pots.ilim_reg_bit Values: 0 or 1 Default: 0 Description: If set to 1 then VEGA will enable loop current limiting mode in FXO dirver. Changes ------- POTS JIRA-312 Fixing FXO Noise issue. ============================================================================= Vega Build R088S055 ------------------- Build Date: 2016-08-09 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 50 VEGAEURO_R088S055.abs bf941c85fa7fdad6a7cd1a2377c456de New Configuration Items ----------------------- _advanced.sip.use_tcp_remote_addr Values: 0 or 1 Default: 0 Description: If set to 1 then VEGA will use received message ip/port to send request/response back or else it will use configured ip/port to send request/response. _advanced.sip.register.use_contact_address Values: 0 or 1 Default: 0 Description: If set to 1 then VEGA will use contact address to send message else it will use remote address _advanced.sip.options.recv_response Values: comma seprated string with sip response code values Default: 200,404,483,407,401,405,501,491,481,2,3,6 Description: VEGA will consider valid option response only if that is configured in this variable. _advanced.sip.use_tcp_remote_addr Values: 0 or 1 Default: 0 Description: If set to 1 then VEGA will use received message ip/port to send request/response back or else it will use configured ip/port to send request/response. _advanced.sip.update.send_update_on_facility Values: 0 or 1 Default: 1 Description: If set to 1 then after getting FACILITY message in ISDN, VEGA will generate UPDATE message. _advanced.sip.register.use_hostname_in_contact Values: 0 or 1 Default: 1 Description: If set to 1 then resigter message will use vega hostname in contact header field else it will use ip address. Changes ------- Redmine Description Call Processing JIRA-131 Call hold is not working properly in 3-way call conference 12815 Fixing Sip Diversion Header value 13067 Fixing BLF SUBSCRIBE not working properly with ENP issue. 13060 Fixing Re-invite on wrong port issue. 13039 VEGA ENP Standalone Mode, Registrar does not work properly on Cisco Phone 791X Series 13026 VEGA watchdog reboot issue 13093 VEGA sip trunk registration issue when more then one 401 message received by far end. 10395 VEGA reboot issue due to no timer left error. 13237 VEGA generating reinvite after REFER has ISDN Tunneling SDP type 12763 Registrar failover not working properly. 12882 Vega 5000 - ENP Call routing misbehaves after Apply of config change 12893 OPTIONS response should be configurable 12897 Fixing RPID header issue in Vega. 13006 Interface Goes down in 400G while Block the Call 12534 Improve session timer handling for PW 13060 Re-invite on wrong port Added configuration option 13287 Vega responds with Update, BT SM responds 501 not implemented 11730 Fixing issue where user account password saved as MD5 hash during config download but applied as plain text while uploading same config file 13113 Vega 4x4 not able to bring up a SIP PW against a Vega 400G JIRA-59 Adding CLI option to check "sip proxy status" 12883 ENP config spontaneous reboot on apply/save 13400 Hostname in the host part of Contact header 13412 MWI not working GUI 12738 Adding Caller ID defaults in Quick configuration 13280 Analog vega 50 & 5000 after version 49 lost FXO configuration options 13290 NTP server default configuration JIRA-37 Fixing issue where Vega is not asking for "Reboot" after changing the "Hostname" in Quick Config 11816 Fixing issue where from GUI we cannot delete groups in cause code mapping. 12053 Fixing issue even when packet profile is deleted media capability is using deleted profile. 13384 Call disconnect feature from GUI not working. 10807 There is no warning info in GUI if the password change is not accepted ============================================================================= Vega Build R088S051 ------------------- Build Date: 2016-02-18 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 50 VEGAEURO_R088S51.abs ec95feec57f304452b9b3f255eca92e4 Vega 5000 VEGA5000_R088S51.abs 2db36efec8fc7403e124349811f02489 Changes ------- Redmine Description Call Processing 12894 Resolve issue with audio on some calls when caller ID is enabled GUI 12593 Added Digital tx/rx gain settings to POTS pages and QuickConfig 12594 Corrected font sizing on some QuickConfig pages 12736 Corrected issue with QuickConfig registration mode selection 12738 Synchronise caller id type between QuickConfig and Expert modes ============================================================================= Vega Build R088S049 ------------------- Build Date: 2015-12-11 This is a minor maintenance release. It adds QuickConfig support for a number of countries tone settings. New Configuration Items ----------------------- _advanced.sip.disable_sdp_ver_inc_on_retransmit Values: 0, 1 Default: 0 Description: Allows the disabling of a session version increment in the case of 200 OK retransmission. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S49.abs 1103f046cc2fc18835dd704ab1112988 Vega 50 VEGAEURO_R088S49.abs 6b1fa9f2c2ec51302c98e77024882921 Vega 5000 VEGA5000_R088S49.abs 7f15e99e0f4af05dbd9e7aad16e2eb56 Changes ------- Redmine Description Call Processing 11509 Corrected routing problems with QSIG MWI 12047 Speed up re-routing in the case of a SIP Proxy Failure 12214 Added parameter to disable incrementing SDP version on re-transmission 12302 Added support for URIs System 9848 Corrected problem with some media control debug events 12387 Fixed problems with HTTP autoexec functionality GUI 12292 Fixed display of PW Config and Advanced Config on T1 systems 12541 Added MWI and Caller ID into QuickConfig Media 12431 Added tone definitions for Iran, Phillipines, South Africa, Singapore and Dubai ============================================================================= Vega Build R088S047 ------------------- Build Date: 2015-08-14 This is a minor maintenance release. There are also some small functional changes. * The LAN2 interface on Vega 400 and Vega 5000 will default to a static IP address of 192.168.168.2 with a subnet mask of 255.255.255.0. The web interface, ssh and telnet are all available on this IP address. * Allow use of authentication user or calling party in Contact and P-* headers * Added configurable packet filter to help remove artifacts from RTP stream when using RFC2833 * Added option for sending a connect-ack on QSIG calls. New Configuration Items ----------------------- sip.profile.*.contact_header_userinfo Values: calling_party, auth_username Default: calling_party Description: Configure the userinfo portion of the Contact header sip.profile.*.p_header_userinfo Values calling_party, auth_username Default: calling_party Description: Configure the userinfo portion of the P-Asserted-Identity/P-Preferred-Identity headers _advanced.isdn_qsig_send_connect_ack Values 0,1 Default: 0 Description: Configure whether the Vega will send a connect-ack on QSIG calls. _advanced.rfc2833.rtp_buffer_depth Values: 0-8 Default: 0 Description: Number of packets to filter on detection of DTMF digit. 0 will disable this feature. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S47.abs f974c888c95323c0763732e0c471f8da Vega 50 VEGAEURO_R088S47.abs 6936fcc1159a363984a1a8e447317513 Vega 5000 VEGA5000_R088S47.abs 6e49ba1f70e627af28873206fdca97fb Changes ------- Redmine Description POTS Interfaces 11767 Fixed issue with MWI indicator 12026 Added packet filtering to avoid problems with double DTMF detection when using RFC2833 GUI Changes 11504 Corrected ranges on _advanced.sip.max_forks Call Processing 11765 Added support for configuring Connect-Ack on QSIG calls 12014 Corrected issue with 500 No Channel Available reponse on private wires 12029 Support configurable contact and P-* headers. ============================================================================= Vega Build R088S045 ------------------- Build Date: 2015-05-21 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S045.abs 491a65709afef97e77dd1a56bf39eb06 Vega 50 VEGAEURO_R088S045.abs 4705573d10fd1264601abf48c6e6e75b Vega 5000 VEGA5000_R088S045.abs 4455c382cb7f355ad6e7a705e7fcd118 Changes ------- Redmine Description POTS Interfaces 11738 Adding GUI option to set FULL2 POTS register value 10687 FSK CLID noise was occasionally heard when answering call 11281 Fixing FXO secondary dial tone not working issue. Call Processing 11707 Fixing Caller name "Disp" not working issue. 11397 Fixing issue of getting Intermittent 403 error response of REGISTER message generated by VEGA. 11229 Fixing QSIG display name not coming properly in SIP messages issue. 11217 Fixing issue of sending wrong ASCII character received in CLID(ISDN SETUP) to SIP user. 10908 Fixing Call Pickup with Music On Hold(TCP) issue. 11196 Fixing issue where T.38 fallback to G711 not working. System 11127 Fixing issue where VEGA was not removing old DNS entries when switching from DHCP to static and adding DNS suffix manually. GUI 11605 Optimized GUI to work with latest browsers. 11504 Adding options to set "signal transport mode" and "max allowed forks" in SIP global section. 11438 Fixing Web GUI issue of reporting error after selecting "User-Agent-header" checkbox from SIP -> Advanced webpage and Adding Web configuration option for User Agent header extension as well. 10807 Fixing issue to generate warning from GUI if user entered password not accepted by VEGA. Configuration 11369 Change Default lan2 to static IP. enable web/telnet/ssh access by default for both lan port 1 and lan port 2. ============================================================================= Vega Build R088S043 ------------------- Build Date: 2015-04-16 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 50 VEGAEURO_R088S043.abs d1117caddbc7a826664a2ce156d9e917 Changes ------- Redmine Description POTS Interfaces 10687 FSK Caller ID could occasionally be heard on lifting FXS handset 11281 Resolved problems with FXO secondary dialtone in India GUI Changes 10807 Added GUI warning if password change is not accepted 11438 Added option to configure User-Agent-Header 11504 Added option to configure signal transport mode and maximum forks Signalling 11217 Remove invalid characters from ISDN caller ID 11229 Handle QSIG caller ID properly 11397 Resolve intermittent authentication issues with SIP registration System 10406 Allow upgrade of firmware over HTTPS ============================================================================= Vega Build R088S042 ------------------- Build Date: 2014-12-15 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S042.abs bbba9b22f38b10ab8f63d0861e1f81ba Vega 50 VEGAEURO_R088S042.abs 9fd67e972e79c2246e6feb2c6458eb2a Vega 5000 VEGA5000_R088S042.abs 555955f367ec117fde71bfb6ee6b5e44 Changes ------- Redmine Description POTS Interfaces 9850 Corrected VMWI on Vega 5000 10607 Fixed issue where caller ID did not always stop on call pickup 10842 Handle cancel correctly in POTS call waiting scenario 10908 Fix issue with Call pickup 11113 Fix problem with TESTFXS commmand 11124 Fix issue with Call transfer and music on hold Call Processing 10403 Strip out TEL: token in diversion IE 10910 Corrected some problems with DNS SRV Sip registration 10919 Handle Refer UUI properly 11229 Handle comma correctly in Caller ID System 10627 Corrected time display in some log messages 10989 Added "FACTORY RESET FULL" command to clear everything including IP information and passwords. Configuration 8245 Change the default value for sipproxy.itsp_register_path to "rewrite_contact_enp". 9245 Change the default for media.pkt_profile.out-of-band-dtmf to "on". R2 11215 Corrected R2 Argentina issue where A6 was moving to Tx Category state instead of connecting call ============================================================================= Vega Build R088S041 ------------------- Build Date: 2014-08-29 This release adds a number of features: * RADIUS support for non-local users - users can now be authenticated via RADIUS without needing to be configured locally. This requires the RADIUS server to support the Sangoma vendor specific attributes. Please contact technical suuport for more information. * Support for customer banners longer than 80 characters. The _advanced.cust_banner field will now hold 490 characters. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S041.abs 2b54065955084d9d9c435b3f722ef0c0 Changes ------- Redmine Description System 10095 Syslog format is not correct 10118 Support long custom banner text 10201 RADIUS support for non-local users 10436 Corrected priority in outgoing syslog messages 10788 RADIUS authentication did not work when RADIUS billing server was not working Signalling 10552 SIP password maximum length is now 32 characters ============================================================================= Vega Build R088S039 ------------------- Build Date: 2014-06-11 This is release exposes some extra parameters on the GUI. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S039.abs e790a3b141970d871bd0dbe6c56aedec Vega 50 VEGAEURO_R088S039.abs 857c56357750dfd1b029cbef81fe882d Vega 5000 VEGA5000_R088S039.abs 5015f26cb00ad2f3af723c3848669ee5 Changes ------- Redmine Description Networking 10383 When running with tcp_cleanup_old_sockets=1 clear down outgoing sockets to prevent cleanup of incoming sockets 10535 Make TCP Sip Max/Max-Major failure retry count configurable Signalling 10103 Registration was not working when set to "on-isdn-active" ============================================================================= Vega Build R088S038 ------------------- Build Date: 2014-05-12 This is release exposes some extra parameters on the GUI. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S038.abs 502e5885a75c549f4d39b7d8858a2287 Vega 50 VEGAEURO_R088S038.abs 3870ffece5d5422e908a3b99e94b9824 Vega 5000 VEGA5000_R088S038.abs 8974e1b84f2fa865b3605258c85e7f55 Changes ------- Redmine Description GUI Changes 10369 Expose DSP allocation mode on GUI. Default to bestmatch if a PCMCIA card is present. 10370 Expose TCP socket cleanup mode on GUI. ============================================================================= Vega Build R088S037 ------------------- Build Date: 2014-05-09 This is a maintenance release which addresses a number of TCP ENP problems and other minor issues. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S037.abs b913ef0969262bee30173fe94ec2eaa9 Vega 50 VEGAEURO_R088S037.abs 60037dac36dea593fd667f0cec531b33 Vega 5000 VEGA5000_R088S037.abs 6645614d83f45f84c14b9964ee91233c Changes ------- Redmine Description System Issues 8669 Disable the third DSP on PCMCIA cards to improve stability. 9801 Resolved some semaphore issues in "show support" logger and added some instrumentation into the output. 10096 On DSP failure release all associated calls. ENP Issues 7536 Make a system reboot mandatory after changing "sipproxy.itsp_proxy.sig_transport" field. 9839 Fixed issue where Vega would respond with 302 "Moved Temporaily" to a CANCEL message. 10078 Resolve operation of ENP when running TCP end-to-end. 10145 Fixed issues whith SDP allocation and release. 10223 In ENP do not add a expire header if one is already present. 10312 Added code to handle faulty R-URI field from some Cisco phones. 10362 Fixed ENP issue with TCP-UDP interop when ITSP is down. ============================================================================= Vega Build R088S036 ------------------- Build Date: 2014-03-14 This is a minor maintenance release. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S036.abs Changes ------- Redmine Description System Issues 9705 Remove warnings of unsupported browsers when logging in to web GUI. 10056 Added facilty to use a custom banner on the GUI ============================================================================= Vega Build R088S035 ------------------- Build Date: 2014-03-10 This release adds SIP call pick-up via SUBSCRIBE/NOTIFY. For more information see http://internal.sangoma.com/VEGA-CallPickup. Release Components ------------------ Platform Filename md5sum Vega 400 VEGA400_R088S035.abs Changes ------- Redmine Description SIP Issues 9794 Corrected handling of ptime and mptime 10018 Added call pickup via SUBSCRIBE/NOTIFY =============================================================================