Sangoma Vega 10.0 Release Notes
-------------------------------

This document describes the release changes for the Sangoma Vega series of
VoIP Gateways.

It is applicable to the Vega 100G/200G/400G. For Vega 50, 5000 and 400 platforms
please use R8.8 software.

=============================================================================
Vega Build R100S049
-------------------
Build Date: 2014-11-09

This release has a number of issues fixed. It is suitable for deployment in all
scenarios including Lync environments.


Release Components
------------------
Platform                Filename             md5sum
Vega 100G/200G/400G     VEGA_R100S049.bin    513c668f9f4809df30a6b2d19c1cbde8


Changes
-------

Redmine Description
GUI Changes
10370   Expose the TCP socket cleanup mode on the web GUI.
10925   Add inactivity timer for web GUI users.

CLI Changes
7714    Prompt for a reboot after performing "factory default"
10989   Added "FACTORY RESET FULL" command to clear everything including
        IP information and passwords.
10552   Support 32 character passwords.

DNS
9433    Resolved issue with sporadic reboots when enabling DNSSRV.
9658    Handle proxy failover when running DNSSRV.
9696    Resolve issues when DNS server is inaccessible at system startup.
10124   On proxy failure do not fallback from DNSSRV to normal operation.
10778   Removed some spurious DNS logging on the serial port.
11039   Corrected usage of secondary DNS server and suffix.
11104   Each DNS SRV query was being sent 4 times.

ENP
9839    Fixed ENP issue where Vega would respond "302 Moved Temporarily"
        to CANCEL message.
10078   Handle 401 response correctly when using ENP over TCP.
10145   Correct handling of SDP in ENP over TCP.
10193   Correct operation of ENP when UA is UDP and ITSP is TCP.
10223   In ENP mode Vega was adding extra expire field.
10261   Enable SIP->SIP calls.
10362   Handle ENP UDP->TCP calling when ITSP is down.
10535   For TCP ENP call presentation groups were not working correctly.

Configuration
8245    Change the default value for sipproxy.itsp_register_path to
        "rewrite_contact_enp".
9245    Change the default for media.pkt_profile.out-of-band-dtmf to
        "on".

Media
9869    Enable RTCP sending during voice calls.
9871    Enable RTCP sending during voice calls.
9924    Use correct TOS setting for media and signalling.
9990    Change default jitter buffer values to improve performance.

Private Wire
8758    In private wire mode always give priority to new calls.
8898    In CAS private wire mode send ringback to TDM side.
9776    Resolve "500 No Channel Available" when running with maximum channels
        private wire.
9883    Fix issue with "DISC ALL" command when running private wire.
9963    For T1 CAS private wire assume mulaw on TDM side.
9965    Handle transmit-only signalling in private wire.

Call Processing
9881    Increase T310 timer to 180 seconds for Lync compatibility.
9902    Corrected handling of very long URIs.
10018   Added call pickup feature as described in RFC53359.
10023   Corrected handling of licensed call capacity.
10096   Clear SIP calls on DSP failure.
10312   Handle incorrect R-URI from some Cisco phones
10336   Resolve call failure on ISDN when SIP Diversion header is present.
10403   Resolve call failure on ISDN when SIP Diversion header is present.
10710   Added call rate limiting at 15 cps.
10771   Fixed problem with reboot on receiving malformed SIP message.
10919   Support UUI from SIP to ISDN.

Networking
9557    Bind the sysName into SNMP traps to allow system identification.
10361   Enable TLS.
10383   Resolve TCP timer issues when socket cleanup is disabled.
10652   Resolve issues with Syslog.
10809   Fix issue with enabling RADIUS.