Sangoma Vega 10.0 Release Notes ------------------------------- This document describes the release changes for the Sangoma Vega series of VoIP Gateways. It is applicable to the Vega 100G/200G/400G. For Vega 50, 5000 and 400 platforms please use R8.8 software. ============================================================================= Vega Build R100S055 Build Date: 2015-08-05 This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. Release Components ------------------ Platform Filename md5sum Vega 100G/200G/400G VEGA_R100S054.bin ce8ec5a39e6ef3276246fad99e9573fa Changes ------- Redmine Description Networking 11369 Assigning fixed static ip on lan port 2. 11357 Fixing static routes configuration issue. 11460 Fixing "show lan routes" command to display route information in cli. 11435 Fixing APIPA not working issue where VEGA was not setting APIPA IP after failing to get IP from dhcp. 11127 Fixing issue of removing old DNS entries while configuring new DNS. Call Processing 11896 Adding configuration option to decide whether vega to get sip session based on incoming-call id or not. 11755 Fixing vega crash due to getting invalid (non-supported) sdp attributes in SIP message. 11707 Fixing caller name "Disp" not working issue. 11703 Adding configuration option to limit inbound/outbound call limitation per sip profile. 11625 Fixing issue where PW calls were dropping on execution of "POTS XPS" commands. 11264 Fixing T.38 fax issue by adding configuration option to enable/disable RTCP for fax. 11196 Fixing T.38 fallback issue. 11466 Fixing issue where SNMP was not disabling properly even after disabling via configuration option. 10406 Fixing HTTPS GUI firmware upgrade issue. 11440 Fixing resource leak issue during cleaning up old PW calls. 10390 Fixing "500 no channel available" issue when BT primay cluster fails and secondary cluster is taking over PW calls. WebUI 11605 WebUI optimization. 11504 Adding GUI option to configure "signal transport mode" and "max forks" under sip section. 11438 Adding GUI option to configure "User Agent header extension". ISDN 11765 Adding configuration option to send CONNECT ACK in response to CONNECT for QSIG ISDN. 11217 Fixing CLID issue in Q931->SIP due to getting "line feed" and "ascii" characters in Q931. ============================================================================= Vega Build R100S051 ------------------- Build Date: 2014-12-17 This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. Release Components ------------------ Platform Filename md5sum Vega 100G/200G/400G VEGA_R100S051.bin deb6dfa69a9ae7d0036fc447fc7ef3c9 Changes ------- Redmine Description Media 11118 Add configuration option for RTCP enable/disable Networking 11222 Handle phy overload in the event of PRI line problems System 10118 Added support for long banner text on console port 10627 Corrected time display in some log messages 11131 Resolved problem with TESTDSL command Call Processing 10842 Handle cancel correctly in POTS call waiting scenario 10910 Corrected some problems with DNS SRV Sip registration 11229 Handle comma correctly in Caller ID R2 11215 Corrected R2 Argentina issue where A6 was moving to Tx Category state instead of connecting call ============================================================================= Vega Build R100S049 ------------------- Build Date: 2014-11-09 This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. Release Components ------------------ Platform Filename md5sum Vega 100G/200G/400G VEGA_R100S049.bin 513c668f9f4809df30a6b2d19c1cbde8 Changes ------- Redmine Description GUI Changes 10370 Expose the TCP socket cleanup mode on the web GUI. 10925 Add inactivity timer for web GUI users. CLI Changes 7714 Prompt for a reboot after performing "factory default" 10989 Added "FACTORY RESET FULL" command to clear everything including IP information and passwords. 10552 Support 32 character passwords. DNS 9433 Resolved issue with sporadic reboots when enabling DNSSRV. 9658 Handle proxy failover when running DNSSRV. 9696 Resolve issues when DNS server is inaccessible at system startup. 10124 On proxy failure do not fallback from DNSSRV to normal operation. 10778 Removed some spurious DNS logging on the serial port. 11039 Corrected usage of secondary DNS server and suffix. 11104 Each DNS SRV query was being sent 4 times. ENP 9839 Fixed ENP issue where Vega would respond "302 Moved Temporarily" to CANCEL message. 10078 Handle 401 response correctly when using ENP over TCP. 10145 Correct handling of SDP in ENP over TCP. 10193 Correct operation of ENP when UA is UDP and ITSP is TCP. 10223 In ENP mode Vega was adding extra expire field. 10261 Enable SIP->SIP calls. 10362 Handle ENP UDP->TCP calling when ITSP is down. 10535 For TCP ENP call presentation groups were not working correctly. Configuration 8245 Change the default value for sipproxy.itsp_register_path to "rewrite_contact_enp". 9245 Change the default for media.pkt_profile.out-of-band-dtmf to "on". Media 9869 Enable RTCP sending during voice calls. 9871 Enable RTCP sending during voice calls. 9924 Use correct TOS setting for media and signalling. 9990 Change default jitter buffer values to improve performance. Private Wire 8758 In private wire mode always give priority to new calls. 8898 In CAS private wire mode send ringback to TDM side. 9776 Resolve "500 No Channel Available" when running with maximum channels private wire. 9883 Fix issue with "DISC ALL" command when running private wire. 9963 For T1 CAS private wire assume mulaw on TDM side. 9965 Handle transmit-only signalling in private wire. Call Processing 9881 Increase T310 timer to 180 seconds for Lync compatibility. 9902 Corrected handling of very long URIs. 10018 Added call pickup feature as described in RFC53359. 10023 Corrected handling of licensed call capacity. 10096 Clear SIP calls on DSP failure. 10312 Handle incorrect R-URI from some Cisco phones 10336 Resolve call failure on ISDN when SIP Diversion header is present. 10403 Resolve call failure on ISDN when SIP Diversion header is present. 10710 Added call rate limiting at 15 cps. 10771 Fixed problem with reboot on receiving malformed SIP message. 10919 Support UUI from SIP to ISDN. Networking 9557 Bind the sysName into SNMP traps to allow system identification. 10361 Enable TLS. 10383 Resolve TCP timer issues when socket cleanup is disabled. 10652 Resolve issues with Syslog. 10809 Fix issue with enabling RADIUS.