Sangoma Vega 13.1 Release Notes =============================== This document describes the release changes for Release 13.1 of the Sangoma Vega series of VoIP gateways. Release 13.1 Overview --------------------- Release 13.1 is the latest GA version of the Vega software and is compatible with the following Vega models: * Vega 100Gv2 * Vega 200Gv2 * Vega 400Gv2 * Vega 3050Gv2 As well as support for newer hardware the release also adds IPv6 support. There are some changes in the configuration of networking interfaces. For more information please refer to the the Sangoma knowledge base or contact Sangoma support for assistance. Release History =============== R131S016 ======== Build Date: 2025-02-23 Products supported: 100Gv2, 200Gv2, 400Gv2, 400GDv2, 3050Gv2 This maintenance release addresses addresses major issues with upgrade and system performance. It is recommended that all users upgrade. Release Components ------------------ md5sum Filename 976a06011cab53f6a60e802b1aa67581 VEGAIMX_DSP_131201_agw_3.7.2_1.bin 938517170bde939ccba90b911c1d5608 VEGAIMX_DSP_131201_dgw_3.7.2_1.bin 33d6d76dfee4f4940c802542c6cef175 VEGAIMX_DSP_205401_agw_3.7.2_1.bin d8977381189a5e1ead7065f2e3d72789 VEGAIMX_DSP_205401_dgw_3.7.2_1.bin 0273c054cf17c97d4cdd7f560a95eccd VEGAIMX_R131S016.bin Changes ------- VEGA-3094 Choppy audio heard whilst refreshing UI VEGA-3100 Intermittent 503 responses when starting 120 PW lines VEGA-3101 Unable to login after upgrade to R131S015 VEGA-3103 Missing ringback tone on some 3050Gv2 outbound calls VEGA-3115 'dbssh enable' does not persist VEGA-3116 DSP reset on 3050Gv2 causing loss of dialtone VEGA-3122 Improve WebUI upgrade process VEGA-3124 400GDv2 PSU trap missing snmpTrapOID R131S015 ======== Build Date: 2025-12-31 This maintenance release addresses major issue regarding security, dsp and autoexec with other issues like proxy selection mode as registrar. This release holds good for 100 / 200 / 400 Gv2 and 3050Gv2 vega models only. Release Components ------------------ This release consists of the following files. If a DSP upgrade is required the UI will prompt for the correct filename. md5sum Filename 976a06011cab53f6a60e802b1aa67581 VEGAIMX_DSP_131201_agw_3.7.2_1.bin 938517170bde939ccba90b911c1d5608 VEGAIMX_DSP_131201_dgw_3.7.2_1.bin 33d6d76dfee4f4940c802542c6cef175 VEGAIMX_DSP_205401_agw_3.7.2_1.bin d8977381189a5e1ead7065f2e3d72789 VEGAIMX_DSP_205401_dgw_3.7.2_1.bin 38c27f4106a61e69d9de75c8c6c0dbc7 VEGAIMX_R131S015.bin Functional Enhancements and Fixes --------------------------------- DSP: VEGA-3045: CLI to show proper DSP upgrade infomaton only after DSP boot is done VEGA-3051: UI to show proper DSP state tool tip AUTOEXEC: VEGA-3034/3096: Autoexec to allow firmware as well as dsp upgrade via FTP / HTTP / HTTPS /TFTP server SNMP: VEGA-3066: VEGA to send proper SNMP trap on one of the PDSU failure VEGA-3069: VEGA to send proper SNMP trap when lan 1 goes down lan is configured in backup mode SIP: VEGA-3098: Vega to send sip signalling messages to registrar ip if proxy selection_mode is registrar SECURITY: VEGA-3032: VEGA not to allow any external communication over 1000 port for security concerns UI: VEGA-2989: VEGA UI to work on https even if http is disabled by user ------------------------------------------------------------------------------------------------------------------- R131S014 ======== Build Date: 2025-10-23 This maintenance release addresses a issue with loopback SIP calls. There are no other changes. Release Components ------------------ This release consists of the following files. If a DSP upgrade is required the UI will prompt for the correct filename. md5sum Filename 976a06011cab53f6a60e802b1aa67581 VEGAIMX_DSP_131201_agw_3.7.2_1.bin 938517170bde939ccba90b911c1d5608 VEGAIMX_DSP_131201_dgw_3.7.2_1.bin 33d6d76dfee4f4940c802542c6cef175 VEGAIMX_DSP_205401_agw_3.7.2_1.bin d8977381189a5e1ead7065f2e3d72789 VEGAIMX_DSP_205401_dgw_3.7.2_1.bin 8ab0b888dd121d05cc95bee6e00988c3 VEGAIMX_R131S014.bin Functional Enhancements and Fixes --------------------------------- SIP: VEGA-3046: Support loopback SIP calls on 3050Gv2 ------------------------------------------------------------------------------------------------------------------- R131S013 ======== Build Date: 2025-10-09 This maintenance release addresses a number of critical issues in Vega gateways. It is recommnded for all supported models. This is a maintenance release for the Vega digital gateways which addresses a number of critical issues. It is recommended for all supported models. Release Components ------------------ This release consists of the following files. If a DSP upgrade is required the UI will prompt for the correct filename. md5sum Filename 976a06011cab53f6a60e802b1aa67581 VEGAIMX_DSP_131201_agw_3.7.2_1.bin 938517170bde939ccba90b911c1d5608 VEGAIMX_DSP_131201_dgw_3.7.2_1.bin 33d6d76dfee4f4940c802542c6cef175 VEGAIMX_DSP_205401_agw_3.7.2_1.bin d8977381189a5e1ead7065f2e3d72789 VEGAIMX_DSP_205401_dgw_3.7.2_1.bin 399b92e353a3f27e909bd55ddb695f4f VEGAIMX_R131S013.bin New Features ------------ NAT: VEGA-2843: Added support for NAT 802.1x: Add support to 802.1x for 3050Gv2 Functional Enhancements and Fixes --------------------------------- UI: VEGA-2832: Updated Sangoma Logo VEGA-3002: Show user DSP status on status page DSP: VEGA-3000: Vega to properly copy DSP firmware before rebooting VEGA-3001: Allow user to force dsp upgrade when required VEGA-3003: DSP upgrade to correct intermittent 'robotic' sounding voice on some calls. DNS/DNSSRV: VEGA-2750: Configurable DNS timeout default to 5 seconds and enable DNS fallback by default VEGA-2990: Allow user to properly configure FQDN CAS: VEGA-2635: Enable DTMF sending during CAS initial call setup