Sangoma Vega 11.1 Release Notes ------------------------------- This document describes the release changes for the Sangoma Vega series of VoIP gateways. Release 11.1 is suitable for all new generation products including Vega 100G, Vega 200G, Vega 400G, Vega 4x4 and Vega 3000G with new DSP fimrmware 2.1.10. For Vega 50, 5000 and 400 platforms please use the Release 8.8 software. In case of any queries please contact Sangoma at http://support.sangoma.com ============================================================================= Vega Build R111S008 ------------------- Build Date: 2017-03-09 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 100G/200G/400G VEGA_R111S008.bin 6321d66806804e42228007225f08723c DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-399: Fixing VEGA ISDN issues found during Hongkong Conformance Testing. VEGA-356: Fixing issue where Vega was continuously sending 200OK even after getting ACK with "Require=100rel" VEGA-358: Fixing issue where calls does not work if incoming invite SDP has multiple 'c' lines present. VEGA-377: Improving logging to highlight registration fail event. VEGA-322: Adding SRTP support. VEGA-431: Adding Music On Hold file upload support. VEGA-318: Add option to disable CAC (Call Admission Control). VEGA-499: Fixing issue where not able to generate TCP calls if we select 'TCP' transport from quick config. VEGA-518: Adding support to handle DTMF payload dynamically. VEGA-532: Block calls processing if DSP versions between vega application and dsp chip is not compatible. POTS VEGA-237: Fixing Call Forward No Answer ( CFNA ) not working properly issue. VEGA-13: Adding 3050G support. VEGA-13: Adding 3050G support. VEGA-287: Adding 60G support. VEGA-344: Fixing caller ID coming with extra '0' issue. VEGA-355: Fixing issue where vega forwarding call to third party even if CF feature is "off" VEGA-427: Fixing issue where vega was not able to get 2nd dialtone during hookflash scenario for India country profile. VEGA-425: Fixing issue where call waiting on 2nd attempt not working. VEGA-434: Fixing vega 3000G crash during call transfer scenario. VEGA-452: Fixing issue where fxs to sip calls stop working due to no available timeslot. VEGA-505: Updating ring trip definitions to improve performance. VEGA-484: Fixing issue of getting one way audio during CW scenario. VEGA-448: Fixing issue of validating supp services code to avoid duplicate/overlap values. VEGA-610: Generating warning when configuring Neon VMWI and CM_CLAMP=1. VEGA-84: Adding 3-way call/conference support. VEGA-401: Adding support to determine the IP address on FXS gateways. LAN VEGA-299: Fixing LAN interface bonding issue for ARM platform, needed only for MIPs platform. VEGA-231: Fixing issue where telnet was listenning to both the LAN ports even if we change telnet to use only 1 lan profile. VEGA-415: Fixing Vega crash issue while doing VLAN configuration. VEGA-493: VEGA DHCP handling enhancements. System VEGA-335: Removing unwanted old show support commands. VEGA-314: Resetting the vega linux access password after factory reset. VEGA-413: Set extended common mode clamp configurable option to 1. VEGA-436: Setting debug diagnostics levels to default when we perform 'factory reset'. VEGA-519: Fixing issue where was starting with calls block status. VEGA-411: Fixing issue where DSP upgrade was not working on Internet Explorer. VEGA-402: Adding TLS support and option to upload TLS certificates from GUI. GUI VEGA-343: Fixing web redirecting issue for "pots config warning" page. VEGA-429: Fixing issue where web was displaying 2 lan profiles for 3000G which has only 1 lan port. VEGA-433: Fixing issue to highlight save/reboot during country change in quick config. VEGA-441: Fixing issue where we were not able to enable supp service on single port. VEGA-320: Fixing issue where CAS PW group was not displaying proper values for newly added fields. VEGA-303: Fixing issue where we were not able to delete lan profiles and static routes from the middle entry. VEGA-503: Fixing issue where for 'US' country profile digital rx and tx gain values were having different values between quick config and expert config. VEGA-504: Fixing issue where " Registration and Authentication ID " values was different in quick config and expert config. VEGA-523: Fixing issue where Vega GUI was not coming up automatically after successfull DSP upgrade on IE 11.0. VEGA-512: Adding support to handle multiple profiles for country. VEGA-615: Fixing issue where we were unable to select "use DHCP" option from NTP configuration section. ============================================================================= Vega Build R111S005 ------------------- Build Date: 2017-01-09 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S005.bin c02bf29a2db9a1d92f5760680fbd47c9 VEGA Vega 100G/200G/400G/4x4 VEGA_R111S005.bin d75b4b85c69612adc37809dd459b3c7a DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-452: Fixing Continuous dialtone issue. ============================================================================= Vega Build R111S004 ------------------- Build Date: 2016-11-30 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S004.bin 75db87b8eb9bba4a2b5b97a57e6a512e VEGA Vega 100G/200G/400G/4x4 VEGA_R111S004.bin 42063c36606186d5ec26fecee06c121d DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-410: Upgrade DSP firmware via autoexec script VEGA-441: Upgrade to 11.1 from 11.0 via CLI/autoexec script ============================================================================= Vega Build R111S003 ------------------- Build Date: 2016-11-21 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt This build is based on R110S021. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S003.bin 00fc15ed90eafb800b936976c16be8ee VEGA Vega 100G/200G/400G/4x4 VEGA_R111S003.bin c0ec933905f6cb979543f1a57e26304e DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing Fix Issue with respect to properly handle DHCP option 66 to properly execute autoexe ============================================================================= Vega Build R111S002 ------------------- Build Date: 2016-10-19 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt This build is based on R110S021. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S002.bin 782541c92044ea5a98ebb447c6f722fb VEGA Vega 100G/200G/400G/4x4 VEGA_R111S002.bin c133b032ea239536d82e48e66d11754b DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Media VEGA-254:Vega taking long time for completely Up the system after reboot using build VEGA_R110S021 ( vega 4x4 ) VEGA-260 Improve vega to dsp echo handling VEGA-272: Upgrade DSP Firmware check and Upgrade VEGA-299 Adding bonding interface only for mips platform as for arm we have only 1 lan port so no bonding required for arm platform GUI VEGA-273: Upgrade DSP via Vega GUI =============================================================================