Sangoma Vega 11.0 Release Notes ------------------------------- This document describes the release changes for the Sangoma Vega series of VoIP gateways. Release 11.0 is suitable for all new generation products including Vega 100G, Vega 200G, Vega 400G, Vega 4x4 and Vega 3000G. For Vega 50, 5000 and 400 platforms please use the Release 8.8 software. In case of any queries please contact Sangoma at http://support.sangoma.com ============================================================================= Vega Build R110S016 ------------------- Build Date: 2016-06-30 This release combines release 10.1 and release 11.0 into one release for all next generation products. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 10.1 release notes at ftp://ftp.sangoma.com/vega/firmware/vega-10.1/release_notes.txt This build is based on R101S019. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Platform Filename md5sum Vega High Density Analogue VEGAARM_R110S016.bin c0b39dd963e2614481d18fe5937097a0 Vega 100G/200G/400G/4x4 VEGA_R110S016.bin 09f99be93819392d2acadac2c17dafb8 New Configuration Items ----------------------- _advanced.sip.register.use_hostname_in_contact Values: 0 or 1 Default: 1 Description: If set to 1 then resigter message will use vega hostname in contact header field else it will use ip address. _advanced.sip.update.send_update_on_facility Values: 0 or 1 Default: 1 Description: If set to 1 then after getting FACILITY message in ISDN, VEGA will generate UPDATE message. _advanced.sip.use_tcp_remote_addr Values: 0 or 1 Default: 0 Description: If set to 1 then VEGA will use received message ip/port to send request/response back or else it will use configured ip/port to send request/response. _advanced.sip.register.use_contact_address Values: 0 or 1 Default: 0 Description: If set to 1 then VEGA will use contact address to send message else it will use remote address. This is needed for Cisco 791x phones. _advanced.sip.options.recv_response Values: comma seprated string with sip response code values Default: 200,404,483,407,401,405,501,491,481,2,3,6 Description: VEGA will consider valid option response only if that is configured in this variable. Modified Configuration Items ---------------------------- sip.sess_timer.interval Values: 120-1209600 Default: 1800 sip.sess_timer.min_interval Values: 120-1209600 Default: 300 New Commands ------------ SIP SHOW PROXY STATUS Displays the status of all configured SIP proxies. Changes ------- Call Processing 11707 Fixed issue when receiving 'Disp' as the caller display name 11755 Fixed handling of large auth headers and unknown SDP attributes 12534 Add support for very long session timers 12763 Improved failover handling of registar and proxy 12883 Resolved occasional reboot when configuring ENP 12893 Added configurable OPTIONS response codes that will be counted as successful responses 12897 Fixing RPID header handling 13006 Report OPTIONS status correctly when calls are admin blocked 13039 Support for Cisco 791x phones in ENP 13060 Added ability to send a TCP response to the originating rather than configured port 13067 Handle BLF susbscribe with ENP 13085 Fixed handling of TCP SIP responses over configured static routes 13093 Fixed issues with registration when receiving a 401 with stale=true 13180 Fixed handling of DSP gains 13237 When receiving a REFER the Vega was generatnig an SDP with ISDN tunneling 13282 Resolve issue with multiple simultaneous Telnet sessions 13287 Added abiolity to configure sending of UPDATE on QSIG facility messages 13290 Resolve NTP issues when using quick config 13400 Added ability to specify use of the IP address in the contact header VEGA-28 Resolve startup problems on Vega3000G when using autoexec VEGA-59 Added command to check sip proxy status POTS 12418 Fixed noise on 4x4 when DTMF levels were changed 12834 Handle silence properly in cadenced tones 12894 Fixed occasional one-way audio on FXS ports when CLID is enabled Networking 11796 Fixed issues when DHCP is disabled and no IP is configured 13284 Resolved issues when using static routing over VLANs VEGA-38 Fixed problem with NTP update VEGA-45 Fixed issue where LAN-2 Static IP was not working after full factory reset VEGA-65 Calls were left blocked if configured lan interface is not up GUI 10807 Added warning if password change is rejected 11730 Fixed problem with uploading user password changes 11816 Fixed issue with deleting groups in cause code mapping 11819 Do not display FXO profile if there are no FXO ports in the system 12053 Add a warning when trying to delete a packet profile that is in use 12738 Changed caller-id to correct values in quick config 13391 Fixed problems with call disconnect from GUI VEGA-37 Added reboot request after changing hostname ============================================================================= Vega Build R110S011 ------------------- Build Date: 2016-02-26 This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. Release Components ------------------ Platform Filename md5sum Vega High Density Analogue VEGAARM_R110S011.bin d41d8cd98f00b204e9800998ecf8427e Changes ------- Redmine Description Call Processing 12279 Fixed issue with receiving calls from second sip profile proxy GUI 11724 Removed spurious unknown LAN interface in DNS and TFTP configuration 11804 Removed spurious unknown LAN interface in NTP configuration 12593 Added Digital tx/rx gain settings to POTS pages and QuickConfig 12594 Corrected font sizing on some QuickConfig pages 12736 Corrected issue with QuickConfig registration mode selection 12738 Synchronise caller id type between QuickConfig and Expert modes Media 12431 Added tone definitions for Iran, Phillipines, South Africa, Singapore and Dubai 12834 Handle silence properly in cadenced tones to correct issue with cadenced dialtone Networking 12634 Allow dotted IP in DHCP TFTP server name field POTS 12864 Corrected audio issues when using caller ID 12867 Store analogue calibration results to speed up startup and improve long line performance ============================================================================= Vega Build R110S010 ------------------- Build Date: 2015-12-04 This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. Release Components ------------------ Platform Filename md5sum Vega High Density Analogue VEGAARM_R110S010.bin ae5c4caeb6a958a65392ed44b2875f06 Changes ------- Redmine Description Networking 12133 Request Option 66 TFTP server in DHCP request 12133 Corrected problems with MAC address substition during autoexec 12387 Fixed issues with HTTP autoexec files Call Processing 11397 Fixed intermittent authentication failures on registration 11509 Corrected routing of MWI messsages 11755 Fixing vega crash due to getting invalid (non-supported) sdp attributes in SIP messages and large authentication headers 11891 Resolve crash during blind transfer 12029 Support configurable contact and P-* headers 12047 Speed up call routing in the case of failed proxy 12105 Corrected call routing problems when accessibilty check is off 12214 Do not increment version number on SDP re-transmission 12302 Add support for tel: URIs 12361 For ENP do not register user if ITSP returns a 480 response Media 9912 Allow configuration of RTP port range 11760 Expose parameters to allow fine tuning of echo canceller POTS Ports 11136 DTMF digits were not passing European conformance testing due to twist values 11888 Fix issue with ETSI adn India caller ID 12178 Corrected crosstalk issue during call setup 12269 Fix issue wiht FXS ports locking up when using Neon MWI GUI 12052 Fixed issue where GUI changes to mac_playout_delay were not being applied correctly 12253 Expose DTMF level parameters on the GUI 12337 Corrected issues setting the time and date from the GUI ============================================================================= Vega Build R110S005 ------------------- Build Date: 2015-07-13 This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. Release Components ------------------ Platform Filename md5sum Vega High Density Analogue VEGAARM_R110S005.bin dc7f30fad75456f0a8be69cdf7a0a64f Changes ------- Redmine Description Networking 11809 Corrected display of default gateway parameters discovered via DHCP 11854 Auoexec filename format was incorrect Resolved issue with SCP Call Processing 11707 DISP: token in dialplan sometimes gave corrupted Caller ID 11888 Fixed problems with post dtmf caller ID 11889 Caller ID tone was sometimes heard on the SIP leg of a call 11891 Blind transfer of calls was not working correctly 11895 Fixed problems with Music on Hold POTS Ports 11813 Corrected display of FXS port status on GUI 11852 Corrected digital gain settings 11926 Fixed audio problems on some loopback analogue calls Implemented neon VMWI =============================================================================