#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Mon Jul 31 17:10:23 EDT 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe2 = WAN_AFT_ANALOG, Comment

[interfaces]
w2g1 = wanpipe2, , TDM_VOICE, Comment

[wanpipe2]
CARD_TYPE 	= AFT
S514CPU 	= A
CommPort 	= PRI
AUTO_PCISLOT 	= YES
PCISLOT 	= 2
PCIBUS  	= 5
FE_MEDIA	= FXO/FXS
TDMV_LAW	= ALAW
TDMV_OPERMODE	= AUSTRALIA
MTU 		= 1500
UDPPORT 	= 9000
TTL		= 255
IGNORE_FRONT_END = NO
TDMV_SPAN	= 2

RM_BATTTHRESH   = 3
RM_BATTDEBOUNCE = 4

RM_FASTRINGER=YES
#RM_FXSTXGAIN=0
#RM_FXSRXGAIN=0
#RM_FXOTXGAIN=0
#RM_FXORXGAIN=0

RM_RINGAMPL=47
#RM_RINGAMPL=45
#RM_RINGAMPL=40
#RM_RINGAMPL=35
#RM_RINGAMPL=30
#RM_RINGAMPL=25
#RM_RINGAMPL=20
#RM_RINGAMPL=15
#RM_RINGAMPL=10

[w2g1]
ACTIVE_CH	= ALL
TDMV_ECHO_OFF	= NO
TDMV_HWEC	= NO