Sangoma Vega 11.1 Release Notes ------------------------------- This document describes the release changes for the Sangoma Vega series of VoIP gateways. Release 11.1 is suitable for all new generation products including Vega 100G, Vega 200G, Vega 400G, Vega 4x4, Vega 3000G, VEGA 3050G and VEGA 60G with new DSP fimrmware 2.1.10. For Vega 50, 5000 and 400 platforms please use the Release 8.8 software. In case of any queries please contact Sangoma at http://support.sangoma.com ============================================================================= Vega Build R111S016 ------------------- Build Date: 2017-12-12 This release has a number of issues fixed. It includes a number of critical fixes and is recommended for all users. NOTE: This release includes support for VEGA 60G new model i.e. 4FXS+2FXO Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 3000G/3050G/60G VEGAARM_R111S015.bin be92b995364f93ca98adb19d29fc0a1a VEGA Vega 100G/200G/400G VEGA_R111S015.bin 91d3f7ff10b514ff946209e01b6687ee DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Configuration ------------- _advanced.lan.link_down_block_calls=1/0 Default=1 By default vega always block calls if vega doesnot have a valid lan ip or lan link is down i.e. no cables is connected any of the lan port. Now, there can be a situation where user doesnot want to connect lan cables to any of the VEGA lan port as user is using it purely for ISDN-ISDN calls. In such a situation, the above parameter is useful where user can set this parameter to 0 so that vega doesnot block calls. NOTE: settingof this parameters requires a reboot. sipproxy.ignore_register_realm=1/0 Default=0 Allow ENP to ignore the domain in REGISTER message thus, allowing multiple domains Changes ------- POTS VEGA-1003 Support for 2FXO Daughtercard VEGA-1022 Fixing MWI issues VEGA-1094 Properly handle T.38 Fax in case of back to back (loopback setup) on analog VEGA ISDN VEGA-990 Send Busy tone to peer when sip peer hangs up due to 486 Busy (in Case of R2) LAN VEGA-1055 VEGA not to block calls if Lan is down depeding upon config parameter SIP VEGA-749 Modified code to decode "To" Header properly to end proper value on to caller name when calling from FXS line connected to ENP VEGA-1084 Added flag to allow ENP to ignore the domain in REGISTER System VEGA-1026 Syslog IP does not update when set from GUI Vega with user having not sufficient privilages VEGA-1062 Improved handling of /etc/resolv.conf GUI VEGA-1021 To display proper number of Reg user Auth index as created ============================================================================= Vega Build R111S015 --------------------- Build Date: 2017-11-13 This release has a number of issues fixed. It includes a number of critical fixes and is recommended for all users. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 3000G/3050G/60G VEGAARM_R111S015.bin 7abee4284ee8ff6a382991704aeaea9f VEGA Vega 100G/200G/400G VEGA_R111S015.bin ef069a68408b1c2ce8e147af9ca09696 DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Configuration ------- sipproxy.itsp_contact_compression=1/0 Default=0. By default Vega ENP generate long contact header to encrypt the user infomation. sometime some sip phones do not support long contact header so in that situation, this parameter is useful so when set to 1 then VEGA ENP will reduce the encrypted contact header length. sipproxy.trunk_gw.forward_to_itsp_mode.allow_local_trunk_calls_to_local_trunk=never/always Default=always Vega ENP case, allow calls from local trunk (non-PSTN trunk gateway) to Local Trunk. lan.if.X.dhcp.get_ftp=0/1 Default=1 If set to 1 then fetch/extract FTP server from DHCP response. lan.if.X.dhcp.get_http=0/1 Default=1 If set to 1 then fetch/extract HTTP server from DHCP response. http.dhcp_if=0/1/2 Default=1 Fetch/extract HTTP server from DHCP response of specified DHCP/LAN interface. ftp.dhcp_if=0/1/2 Default=1 Fetch/extract FTP server from DHCP response of specified DHCP/LAN interface. Changes ------- ISDN VEGA-495: Fixing issue where ISDN Redirect IE not creating SIP Diversion Header. VEGA-978: Fixing Vega 400G crash issue due to receiving corrupted ISDN messages. POTS VEGA-885: Add support for multiple FXO/FXS HW profiles in TDM VEGA-712: Fixing issue where FXS Ring Profile was present on VEGA FXO box. VEGA-851: Fixing Tone detection issue in FXO gateways. VEGA-956: Fixing invalid POTS ring index issue. VEGA-879: MWI and polarity reversal related issue fixes. DSP VEGA-849: Fixing error while loading MoH file to DSP. VEGA-976: Allow user to start and stop dsp DSP Tap on a particular DSP port and download the same once it is done. LAN VEGA-813: Fixing crash happening after create VLAN and then reboot system on GUI. VEGA 495: Improving DHCP response handling 1. Added dhcp_if parameter for ftp and http. 2. Added get_ftp and get_http parameters. 3. Optimized code to support option66. VEGA-418: Adding USB to Ethernet support for 3000G/3050G/60G Vega gateways. SIP VEGA-531 Fix long contact header issue in Vega ENP. VEGA-750 Fix outbound fax issue where G711 fallback invite was not having media line. VEGA-828 Adding regex matching for ENP Auth users. VEGA-845 Adding config option to allow local trunk to local trunk calls via SIP ENP. VEGA-853: Fixing Vega Brazil SIP Conformance Testing issues. VEGA-744: Add Warning in RTP Port Range Configuration. System VEGA-680 Adding linux debugging information also in "show support" utility. VEGA-801: Fixing crash while deleting a new user in the "User Administration". VEGA-827: Fixing Vega crash while execuing PUT command using CRON job. VEGA-876: Fixing crash while open "show support" link multiple times on GUI and CLI on VEGA 60. VEGA-821: Fixing memory corruption in "SHOW SUPPORT". VEGA-928: Fixing issue where randomly Serial Port on 60G stops responding. VEGA-979: Factory reset command improvement. GUI VEGA-806 Fixing issue where "SIP Server Transport Mode" is showing "tls" without having TLS license. VEGA-783 Fixing issue where "Accessibility Check Transport" for Proxy/Registrar is not setting properly after setting "SIP Server Transport Mode" as "TLS" in Quick Config. VEGA-829: Fixing issue where we were able to save the blank password in GUI, though not able to login thru blank password. VEGA-830: Fixing issue where warning clear option was not working properly. VEGA-430: Fixing issue where Vega was not asking for reboot after change the TLS Local port on GUI. VEGA-904: Fixing issue where "FXS_ports_profile" is showing "bt" as callerid type instead of "etsi-fsk-post". VEGA-111: Fixing issue where Changing hostname on expert config, doesnot reflect the same on quick config. VEGA-993: Fixing issue where was able to "submit" on Quick Config after changed any Configuration. ============================================================================= Vega Build R111S014 --------------------- Build Date: 2017-07-13 This release is mainly for analogue vega except VEGA 4x4. This release has a number of issues fixed. It includes a number of critical fixes and is recommended for all users. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 3000G/3050G/60G VEGAARM_R111S014.bin 1adf3b0c222f572900d41e54a53118a7 DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- POTS VEGA-711 Add new spi drivers and user spi caching for FXO and FXS VEGA-773 Add new version of india country config i.e. IN.v1 for airtel line VEGA-776 Corrected SPI mappings for 3050G FXO ports DSP VEGA-658 Disable the octasic timeout on CLI detection LAN VEGA-756 Fixed not to allow user to create more than 4 Vlan ID VEGA-764 VEGA automatically change default lan profile to lan 1 if there is no lan 2 present SIP VEGA-750 Outbound FAX issue T38 reinvite 488 & G711 failover no media descriptor VEGA-655 Backward compatibility support for Outbound Proxy IP/Name configuration System VEGA-740 factory reset full donot erase VEGA license VEGA-787 Proper LED status when vega is up and running GUI VEGA-721 Add china country profile to vega VEGA-784 Display tone detect screen if there are FXO ports VEGA-655 Quick Config Improvements like: 1. Added Colon Validation i.e. user is not allowed to enter ip:port on to quick config 2. Added help button 3. Removed Outbound Proxy IP/Name 4. Changed "SIP Outbound Server port" field with "SIP Server Port" ============================================================================= Vega Build R111S013 --------------------- Build Date: 2017-05-10 This release is mainly for Digital Vega models. This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 100G/200G/400G VEGA_R111S012.bin c581fda69de509954ce4e02e9380c315 DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- GUI VEGA-732 VEGA to open ports poperly on HTTP/HTTPS port when VLAN/all(including vlan) interface is selected ============================================================================= Vega Build R111S012 --------------------- Build Date: 2017-05-05 This release is mainly for Digital Vega models. This release has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 100G/200G/400G VEGA_R111S012.bin 2049650d5c16fde1020ce3e819ca57cc DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Configuration ------- users.radius_fallback=1/0 Default=0. If set to 1 then if Radius server is down, Vega will allow login for this user based on configured credentials(if configured in vega). This parameter can be controlled by "admin" only so "admin" only can decide which user can have this fallback flexibility when Radius server is down. Changes ------- System VEGA-641/693 Adding support to Capture ISDN and SIP pcap from GUI. Media VEGA-681 Fixing RTP Issue on VEGA when configuring RTP port range other then default values. SIP Vega-706 Fixing issue where Vega was changing the header from tel fromat to sip uri mistakenly. Radius VEGA-297 Improving VEGA RADUIS functionality. GUI VEGA-657 Adding German DE country option in Quick Config. ============================================================================= Vega Build R111S010.4 --------------------- Build Date: 2017-04-13 The is a patch release to target problems with Neon VMWI on the high density analogue platforms. It is recommended for all deployments using Neon MWI. IMPORTANT ========= For VMWI to work correctly the following must be set, saved and the system rebooted: set _advanced.pots.fxs.1.extended_cm_clamp_mode=0 Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S010.4.bin 515a1e06783ff4923ee621ab5bf789ce Changes ------- POTS VEGA-717 Vega 3050 MWI causing phone to not ring for incoming call ============================================================================= Vega Build R111S010 ------------------- Build Date: 2017-03-30 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt NOTE: Upgrading from 11.0 to 11.1 release would also required DSP Firmware upgrade to 2.1.10. Please find below link for step to upgrade dsp: http://wiki.sangoma.com/display/VG/Firmware+Update#FirmwareUpdate-DSPUpgradeProcedure Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 3000G/3050G VEGAARM_R111S010.bin 02000563b600e3115e9c03413e32e6a5 VEGA Vega 100G/200G/400G VEGA_R111S010.bin ab0da8f8d682e72f84a0ac5aa0310b2e DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-659: VEGA properly handling TLS calls VEGA-688: Fixing Call block due to maintainance mode SYSTEM VEGA-612: Adding radius support for High Density Analogue VEGA LAN VEGA-692: Fixing Calls locked due to invalid LAN IP when setting full duplex mode as off GUI VEGA-420: Adding proper instructions on GUI while Firmware Upgrade VEGA-500: Adding proper warning when user doesnot select proper codec ============================================================================= Vega Build R111S008 ------------------- Build Date: 2017-03-09 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 100G/200G/400G VEGA_R111S008.bin 6321d66806804e42228007225f08723c DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-399: Fixing VEGA ISDN issues found during Hongkong Conformance Testing. VEGA-356: Fixing issue where Vega was continuously sending 200OK even after getting ACK with "Require=100rel" VEGA-358: Fixing issue where calls does not work if incoming invite SDP has multiple 'c' lines present. VEGA-377: Improving logging to highlight registration fail event. VEGA-322: Adding SRTP support. VEGA-431: Adding Music On Hold file upload support. VEGA-318: Add option to disable CAC (Call Admission Control). VEGA-499: Fixing issue where not able to generate TCP calls if we select 'TCP' transport from quick config. VEGA-518: Adding support to handle DTMF payload dynamically. VEGA-532: Block calls processing if DSP versions between vega application and dsp chip is not compatible. POTS VEGA-237: Fixing Call Forward No Answer ( CFNA ) not working properly issue. VEGA-13: Adding 3050G support. VEGA-13: Adding 3050G support. VEGA-287: Adding 60G support. VEGA-344: Fixing caller ID coming with extra '0' issue. VEGA-355: Fixing issue where vega forwarding call to third party even if CF feature is "off" VEGA-427: Fixing issue where vega was not able to get 2nd dialtone during hookflash scenario for India country profile. VEGA-425: Fixing issue where call waiting on 2nd attempt not working. VEGA-434: Fixing vega 3000G crash during call transfer scenario. VEGA-452: Fixing issue where fxs to sip calls stop working due to no available timeslot. VEGA-505: Updating ring trip definitions to improve performance. VEGA-484: Fixing issue of getting one way audio during CW scenario. VEGA-448: Fixing issue of validating supp services code to avoid duplicate/overlap values. VEGA-610: Generating warning when configuring Neon VMWI and CM_CLAMP=1. VEGA-84: Adding 3-way call/conference support. VEGA-401: Adding support to determine the IP address on FXS gateways. LAN VEGA-299: Fixing LAN interface bonding issue for ARM platform, needed only for MIPs platform. VEGA-231: Fixing issue where telnet was listenning to both the LAN ports even if we change telnet to use only 1 lan profile. VEGA-415: Fixing Vega crash issue while doing VLAN configuration. VEGA-493: VEGA DHCP handling enhancements. System VEGA-335: Removing unwanted old show support commands. VEGA-314: Resetting the vega linux access password after factory reset. VEGA-413: Set extended common mode clamp configurable option to 1. VEGA-436: Setting debug diagnostics levels to default when we perform 'factory reset'. VEGA-519: Fixing issue where was starting with calls block status. VEGA-411: Fixing issue where DSP upgrade was not working on Internet Explorer. VEGA-402: Adding TLS support and option to upload TLS certificates from GUI. GUI VEGA-343: Fixing web redirecting issue for "pots config warning" page. VEGA-429: Fixing issue where web was displaying 2 lan profiles for 3000G which has only 1 lan port. VEGA-433: Fixing issue to highlight save/reboot during country change in quick config. VEGA-441: Fixing issue where we were not able to enable supp service on single port. VEGA-320: Fixing issue where CAS PW group was not displaying proper values for newly added fields. VEGA-303: Fixing issue where we were not able to delete lan profiles and static routes from the middle entry. VEGA-503: Fixing issue where for 'US' country profile digital rx and tx gain values were having different values between quick config and expert config. VEGA-504: Fixing issue where " Registration and Authentication ID " values was different in quick config and expert config. VEGA-523: Fixing issue where Vega GUI was not coming up automatically after successfull DSP upgrade on IE 11.0. VEGA-512: Adding support to handle multiple profiles for country. VEGA-615: Fixing issue where we were unable to select "use DHCP" option from NTP configuration section. ============================================================================= Vega Build R111S007 ------------------- Build Date: 2017-03-08 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega 100G/200G/400G VEGA_R111S007.bin 9b786d14c78b892c0618d8cb1678ef3b DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-399: Fixing VEGA ISDN issues found during Hongkong Conformance Testing. VEGA-356: Fixing issue where Vega was continuously sending 200OK even after getting ACK with "Require=100rel" VEGA-358: Fixing issue where calls does not work if incoming invite SDP has multiple 'c' lines present. VEGA-377: Improving logging to highlight registration fail event. VEGA-322: Adding SRTP support. VEGA-431: Adding Music On Hold file upload support. VEGA-318: Add option to disable CAC (Call Admission Control). VEGA-499: Fixing issue where not able to generate TCP calls if we select 'TCP' transport from quick config. VEGA-518: Adding support to handle DTMF payload dynamically. VEGA-532: Block calls processing if DSP versions between vega application and dsp chip is not compatible. POTS VEGA-237: Fixing Call Forward No Answer ( CFNA ) not working properly issue. VEGA-13: Adding 3050G support. VEGA-13: Adding 3050G support. VEGA-287: Adding 60G support. VEGA-344: Fixing caller ID coming with extra '0' issue. VEGA-355: Fixing issue where vega forwarding call to third party even if CF feature is "off" VEGA-427: Fixing issue where vega was not able to get 2nd dialtone during hookflash scenario for India country profile. VEGA-425: Fixing issue where call waiting on 2nd attempt not working. VEGA-434: Fixing vega 3000G crash during call transfer scenario. VEGA-452: Fixing issue where fxs to sip calls stop working due to no available timeslot. VEGA-505: Updating ring trip definitions to improve performance. VEGA-484: Fixing issue of getting one way audio during CW scenario. VEGA-448: Fixing issue of validating supp services code to avoid duplicate/overlap values. VEGA-610: Generating warning when configuring Neon VMWI and CM_CLAMP=1. VEGA-84: Adding 3-way call/conference support. VEGA-401: Adding support to determine the IP address on FXS gateways. LAN VEGA-299: Fixing LAN interface bonding issue for ARM platform, needed only for MIPs platform. VEGA-231: Fixing issue where telnet was listenning to both the LAN ports even if we change telnet to use only 1 lan profile. VEGA-415: Fixing Vega crash issue while doing VLAN configuration. VEGA-493: VEGA DHCP handling enhancements. System VEGA-335: Removing unwanted old show support commands. VEGA-314: Resetting the vega linux access password after factory reset. VEGA-413: Set extended common mode clamp configurable option to 1. VEGA-436: Setting debug diagnostics levels to default when we perform 'factory reset'. VEGA-519: Fixing issue where was starting with calls block status. VEGA-411: Fixing issue where DSP upgrade was not working on Internet Explorer. VEGA-402: Adding TLS support and option to upload TLS certificates from GUI. GUI VEGA-343: Fixing web redirecting issue for "pots config warning" page. VEGA-429: Fixing issue where web was displaying 2 lan profiles for 3000G which has only 1 lan port. VEGA-433: Fixing issue to highlight save/reboot during country change in quick config. VEGA-441: Fixing issue where we were not able to enable supp service on single port. VEGA-320: Fixing issue where CAS PW group was not displaying proper values for newly added fields. VEGA-303: Fixing issue where we were not able to delete lan profiles and static routes from the middle entry. VEGA-503: Fixing issue where for 'US' country profile digital rx and tx gain values were having different values between quick config and expert config. VEGA-504: Fixing issue where " Registration and Authentication ID " values was different in quick config and expert config. VEGA-523: Fixing issue where Vega GUI was not coming up automatically after successfull DSP upgrade on IE 11.0. VEGA-512: Adding support to handle multiple profiles for country. VEGA-615: Fixing issue where we were unable to select "use DHCP" option from NTP configuration section. ============================================================================= Vega Build R111S005 ------------------- Build Date: 2017-01-09 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S005.bin c02bf29a2db9a1d92f5760680fbd47c9 VEGA Vega 100G/200G/400G/4x4 VEGA_R111S005.bin d75b4b85c69612adc37809dd459b3c7a DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-452: Fixing Continuous dialtone issue. ============================================================================= Vega Build R111S004 ------------------- Build Date: 2016-11-30 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S004.bin 75db87b8eb9bba4a2b5b97a57e6a512e VEGA Vega 100G/200G/400G/4x4 VEGA_R111S004.bin 42063c36606186d5ec26fecee06c121d DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing VEGA-410: Upgrade DSP firmware via autoexec script VEGA-441: Upgrade to 11.1 from 11.0 via CLI/autoexec script ============================================================================= Vega Build R111S003 ------------------- Build Date: 2016-11-21 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt This build is based on R110S021. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S003.bin 00fc15ed90eafb800b936976c16be8ee VEGA Vega 100G/200G/400G/4x4 VEGA_R111S003.bin c0ec933905f6cb979543f1a57e26304e DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Call Processing Fix Issue with respect to properly handle DHCP option 66 to properly execute autoexe ============================================================================= Vega Build R111S002 ------------------- Build Date: 2016-10-19 This release combines release 11.0 and release 11.1 into one release for all next generation products with latest dsp firmware 2.1.10. It also has a number of issues fixed. It is suitable for deployment in all scenarios including Lync environments. It includes a number of critical fixes and is recommended for all users. For full details of all changes please also refer to the release 11.0 release notes at below link: ftp://ftp.sangoma.com/vega/firmware/vega-11.0/release_notes.txt This build is based on R110S021. Release Components ------------------ Please ensure that you use the correct firmware file based on the hardware platform. Firmware Arch Platform Filename md5sum VEGA Vega High Density Analogue VEGAARM_R111S002.bin 782541c92044ea5a98ebb447c6f722fb VEGA Vega 100G/200G/400G/4x4 VEGA_R111S002.bin c133b032ea239536d82e48e66d11754b DSP 2.1.10 vega_dsp_2.1.10.bin 883f401f5586a408262b59354b62ed41 Changes ------- Media VEGA-254:Vega taking long time for completely Up the system after reboot using build VEGA_R110S021 ( vega 4x4 ) VEGA-260 Improve vega to dsp echo handling VEGA-272: Upgrade DSP Firmware check and Upgrade VEGA-299 Adding bonding interface only for mips platform as for arm we have only 1 lan port so no bonding required for arm platform GUI VEGA-273: Upgrade DSP via Vega GUI =============================================================================