#!/bin/bash -p # chkconfig: 2345 7 9 # Description: WANPIPE WAN Router Initialization Script. # # copyright (c) 1999-2002, Sangoma Technologies Inc. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version # 2 of the License, or (at your option) any later version. # ========================================================================== # Sep 19, 2007 Alex Feldman Add DEPMOD=NO support for FreeBSD OS. # July 28,2004 Alex Feldman Do not run 'ztcfg' after interface # configuration. Run ztcfg script manually # after all Voip interfaces loaded. # Jan 16, 2004 David Rokhvarg Added 'lineprobe' option # Mar 12, 2001 Nenad Corbic Added new if support # Feb 20, 2001 Nenad Corbic Use /proc/net/wanrouter/status to determine # the active devices. # Jul 17, 2000 Nenad Corbic Added version option. # Fixed the shutdown bug. If all interfaces # are down but modules loaded, unload # modules. # May 30, 2000 Nenad Corbic Updated for v2.1.4 # Enable IP Forwarding Option # Apr 05, 2000 Nenad Corbic Updated for v2.1.3 # Feb 22. 2000 Nenad Corbic Updated for v2.1.2 # Feb 15, 2000 Nenad Corbic Load WANPIPE socket module along # with router modules. # Jan 18, 2000 Nenad Corbic No interface files are needed for API, # interfaces. No IP addresses neccessary. # Nov 09, 1999 Nenad Corbic Updated for v2.1.1 # Enabled starting and stoping # each wanpipe device separately. # Nov 09, 1999 Nenad Corbic Updated for v2.1.1 # Oct 04, 1999 Nenad Corbic Updated for v2.1.0 # Aug 04, 1999 Nenad Corbic Updated for v2.0.5 # Oct 15, 1998 Jaspreet Singh Updated for v2.0.4 # Dec 09, 1997 Jaspreet Singh Updated for v2.0.2 # Nov 28, 1997 Jaspreet Singh Updated for v2.0.1 # Nov 06, 1997 Jaspreet Singh Updated for v2.0.0 # Jul 28, 1997 Jaspreet Singh Updated for v1.0.5 # Jul 10, 1997 Jaspreet Singh Updated for v1.0.4 # Dec 15, 1996 Gene Kozin Initial version based on Sangoma's WANPIPE(tm) # ============================================================================ ####### FUNCTION DEFINITIONS ################################################# # ---------------------------------------------------------------------------- # Prompt user for input. # ---------------------------------------------------------------------------- prompt() { if test $NONINTERACTIVE; then return 0 fi # BASH echo -ne "$*" >&2 echo -n "$*" >&2 read CMD rest return 0 } # ---------------------------------------------------------------------------- # Get Yes/No # ---------------------------------------------------------------------------- getyn() { if test $NONINTERACTIVE; then return 0 fi while prompt "$* (y/n) " do case $CMD in [yY]) return 0 ;; [nN]) return 1 ;; *) echo -e "\nPlease answer y or n" >&2 ;; esac done } # ---------------------------------------------------------------------------- # Pause. # ---------------------------------------------------------------------------- pause() { # BASH [ $# -ne 0 ] && echo -e $* >&2 [ $# -ne 0 ] && echo -e "$*" >&2 echo -e "Press [Enter] to continue...\c" >&2 read tmp return 0 } check_bash () { BASH_SUPPORT=`echo $BASH_VERSION | cut -d'.' -f1 2> /dev/null` } check_awk () { major_ver=${RELEASE%%.*} if [ $OSYSTEM = "Linux" ]; then eval "type awk 2> /dev/null > /dev/null" elif [ $OSYSTEM = "FreeBSD" ]; then eval "type awk 2> /dev/null > /dev/null" else eval "awk 2> /dev/null > /dev/null" fi if [ $? -eq 0 ]; then AWK_SUPPORT=YES else AWK_SUPPORT=NO fi } cleanup () { eval "rm -f $WAN_PROG_LOCK 2> /dev/null > /dev/null" #Check module checks if modules are loaded and updates #the subsys lock for LINUX check_module exit $1 } # ---------------------------------------------------------------------------- # Check to see if a value belongs to the list. # Return: 0 - yes # 1 - no # ---------------------------------------------------------------------------- check_list() { [ $# -lt 2 ] && return 1 val=$1 shift # BASH for i in $* for i in "$*" do [ "$val" = "$i" ] && return 0 done return 1 } # ---------------------------------------------------------------------------- # Display error message. # ---------------------------------------------------------------------------- error() { echo -e "$SCRIPT: $*!" [ -f "$WAN_LOG" ] && echo -e "$*!" >> $WAN_LOG return 0 } file_exist() { local ret eval "ls $1.* > /dev/null 2> /dev/null" ret=$? return $ret } # ---------------------------------------------------------------------------- # Configure network interface. # This routine performs TCP/IP-level interface configuration. Interface name # is given as an argument. It reads a configuration file with the same name in # and calls ifconfig and route to do the job. # # Configuration file is actually a shell script containing only variables: # # ONBOOT=yes if not 'yes' then skip this file # IPADDR=xxx.xxx.xxx.xxx IP address of this interface # NETMASK=xxx.xxx.xxx.xxx Network mask for this interface # NETWORK=xxx.xxx.xxx.xxx Network address # BROADCAST=xxx.xxx.xxx.xxx Broadcast address # POINTOPOINT=xxx.xxx.xxx.xxx Point-to-point address # GATEWAY=xxx.xxx.xxx.xxx Gateway address # ---------------------------------------------------------------------------- interface_up() { ONBOOT= IPADDR= NETMASK= NETWORK= BROADCAST= POINTOPOINT= GATEWAY= if [ ! -d "$WAN_INTR_DIR" ]; then error "Directory $WAN_INTR_DIR not found" return 1 fi if [ $NEW_IF_TYPE = YES ]; then if [ $LINUX_DISTR = redhat ]; then if [ $WAN_INTR_DIR = "/etc/sysconfig/network-scripts" ]; then ifup $1 return 0 fi fi # BASH source $WAN_INTR_DIR/ifcfg-$1 . $WAN_INTR_DIR/ifcfg-$1 else if [ ! -f $WAN_INTR_DIR/$1 ]; then ifconfig $1 up return 0; fi # BASH source $WAN_INTR_DIR/$1" . $WAN_INTR_DIR/$1 fi # Configure interface. if [ "$IPADDR" -a "$IPADDR" != "0.0.0.0" ]; then # Prepare ifconfig options. OPTIONS= if [ $OSYSTEM = "Linux" ]; then [ "$POINTOPOINT" ] && OPTIONS="$OPTIONS pointopoint $POINTOPOINT" else [ "$POINTOPOINT" ] && OPTIONS="$OPTIONS $POINTOPOINT" fi [ "$NETMASK" ] && OPTIONS="$OPTIONS netmask $NETMASK" [ "$BROADCAST" ] && OPTIONS="$OPTIONS broadcast $BROADCAST" if [ $OSYSTEM = "Linux" ]; then ifconfig $1 $IPADDR $OPTIONS else ifconfig $1 inet $IPADDR $OPTIONS fi ifconfig $1 up else ifconfig $1 up fi if [ "$GATEWAY" ]; then check_command_exist route if [ $? -eq 0 ]; then if [ $OSYSTEM = "Linux" ]; then if [ "$GATEWAY" = 0 ] || [ "$GATEWAY" = "0.0.0.0" ]; then if [ "$IPADDR" -a "$IPADDR" != "0" -a "$IPADDR" != "0.0.0.0" ]; then route add default dev $1 fi else route add default gw $GATEWAY fi else if [ "$GATEWAY" = 0 ] || [ "$GATEWAY" = "0.0.0.0" ]; then if [ "$IPADDR" -a "$IPADDR" != "0" -a "$IPADDR" != "0.0.0.0" ]; then route add -net 0.0.0.0 -interface $1 fi else route add -net 0.0.0.0 $GATEWAY fi fi else if [ $OSYSTEM = "Linux" ]; then check_command_exist ip if [ $? -eq 0 ]; then if [ "$GATEWAY" = 0 ] || [ "$GATEWAY" = "0.0.0.0" ]; then ip route add default dev $1 else ip route add default via $GATEWAY fi return 0 fi fi echo echo "Error: Failed to set route, no route or ip cmd found" echo fi fi if [ $OSYSTEM = "Linux" ] && [ $LINUX_DISTR = redhat ]; then /etc/sysconfig/network-scripts/ifup-routes $1 fi return 0 } check_module () { if [ $OSYSTEM = "Linux" ]; then [ -d "$ROUTER_PROC" ] && { touch $WAN_LOCK 2> /dev/null return 0 } else for i in $WAN_DRIVERS do $MODULE_STAT | grep -q $i && { touch $WAN_LOCK 2> /dev/null return 0 } done fi # Driver is not loaded if [ -e $WAN_LOCK ]; then rm -f $WAN_LOCK 2> /dev/null fi return 1; } get_mod_name() { local path=$1 local name=$2 if [ "$DEPMOD" = "YES" ]; then if [ "$OSYSTEM" = "Linux" ]; then module_name=$name else module_name=$name$MODULE_EXT fi else module_name=$path/$name$MODULE_EXT fi return 0 } load_driver () { local err if [ $OSYSTEM = "Linux" ]; then $MODULE_LOAD $1 > /dev/null err=$? elif [ $OSYSTEM = "FreeBSD" ]; then err=`$MODULE_LOAD $1 >/dev/null` elif [ $OSYSTEM = "OpenBSD" -o $OSYSTEM = "NetBSD" ]; then err=`$MODULE_LOAD -o ${WAN_MODULE_DIR}/$1.out -e$1 -p${WAN_MODULE_DIR}/$POSTINSTALL ${WAN_MODULE_DIR}/$1.o 1> /dev/null` fi return $err } unload_driver () { local err if [ $OSYSTEM = "OpenBSD" -o $OSYSTEM = "NetBSD" ]; then \rm -rf ${WAN_MODULE_DIR}/$1.out err=`$MODULE_UNLOAD -n $1 2> /dev/null` else err=`$MODULE_UNLOAD $1 2> /dev/null` err=`$MODULE_UNLOAD sdladrv 2> /dev/null` fi #Deprecated: Confirm Alex #FIXME # if [ $OSYSTEM = "Linux" ]; then # # try to unload Echo Canceller module # eval "wan_ec_client unload 2>/dev/null" # fi return $err } #-------------------------------------------------------------------------- # Create character device /dev/wanrouter #-------------------------------------------------------------------------- create_cdev() { if [ $OSYSTEM = "FreeBSD" ]; then [ ! -e "$CDEV_WANROUTER" ] && { mknod $CDEV_WANROUTER c $CDEV_MAJOR $CDEV_MINOR } fi } # ---------------------------------------------------------------------------- # Start WAN wanrouter. # o create log file # o check configuration file presence # o load WAN drivers (using modprobe) # o configure drivers # o configure interfaces # ---------------------------------------------------------------------------- load_module() { local opt=${1:-NO} check_module if [ $? -eq 0 ]; then return 0 fi if [ $opt != silent ]; then echo "Starting WAN Router..." echo "`date`: starting WAN router" >> $WAN_LOG fi if [ $OSYSTEM = "Linux" ]; then if [ -e "/proc/net/wanrouter" ]; then #Make sure to load optionl modules wansock_config LOAD annexg_config LOAD lip_config LOAD wanec_config LOAD #RuggedCom LedTask touch $WANPIPE_IS_RUNNING return 0 fi fi # Check if SecureLevel allows to load module. if [ $OSYSTEM = "OpenBSD" ]; then if [ $SECURELEVEL -gt 0 ]; then echo "Error: Your securelevel does not allow to load kernel modules!" return 1 fi fi for i in $MODULES do module_name=$i$MODULE_EXT if [ ! -f $module_name ]; then if [ $OSYSTEM = "Linux" ]; then eval "echo $OPT_MODULES | grep $i > /dev/null 2> /dev/null" if [ $? -ne 0 ]; then mod_error $i return 1 fi else mod_error $i return 1 fi fi done [ "$ROUTER_BOOT" = "NO" -o -z "$WAN_DRIVERS" ] && { echo -e "\n\nERROR in $WAN_CONF_DIR/wanrouter.rc file !!!" echo -e " ROUTER_BOOT is set to NO, OR" echo -e " WAN_DRIVERS must be set to wanpipe\n" echo -e " wanrouter start failed !!!\n" return 1 } if [ $DEPMOD = YES ]; then if [ $opt != silent ]; then echo -n "Loading WAN drivers: " fi for i in $WAN_DRIVERS do $MODULE_STAT | grep -q $i && continue if [ $opt != silent ]; then echo -n "$i " echo -n "Loading driver $i ... " >> $WAN_LOG fi if load_driver $i then echo "ok" >> $WAN_LOG else if [ $opt != silent ]; then echo -e "\nFailed to load wanpipe modules !\n" echo "fail" >> $WAN_LOG fi unload_module return 1 fi done else if [ $opt != silent ]; then echo -n "Loading WAN drivers: " fi for i in $MODULES do module_name=$i$MODULE_EXT if load_driver "$module_name" then if [ $opt != silent ]; then echo "ok" >> $WAN_LOG fi else if [ $opt != silent ]; then echo -e "\nFailed to load $module_name modules !\n" echo "fail" >> $WAN_LOG fi unload_module return 1 fi done fi if [ $OSYSTEM = "Linux" ]; then wansock_config LOAD annexg_config LOAD fi if ! lip_config LOAD then unload_module return 1 fi if ! wanec_config LOAD then lip_config UNLOAD unload_module return 1 fi if [ $opt != silent ]; then echo "done." fi # Create char devices (if needed) create_cdev touch $WANPIPE_IS_RUNNING return 0 } router_config() { # Configure router. if [ $OSYSTEM != "Linux" ]; then [ -e "$CDEV_WANROUTER" ] || { return 1 } fi # $1 = /etc/wanpipe#.conf where # is an integer if [ "$WAN_DYN_WANCONFIG" = YES ]; then eval "/usr/sbin/wanconfig_client cmd=start,card=$2" else wanconfig -v -f $1 -a $WAN_ADSL_LIST >> $WAN_LOG fi } interf_config() { local device=$1 local WAN_CONF=$2 local int_file local INTERFACES local voip_flag #echo "============ iterf_config ================" # Configure network interfaces. #If TTY is defined there are no network interfaces eval "grep \"TTY.*=.*YES\" -i $WAN_CONF > /dev/null" if [ $? -eq 0 ]; then echo -e "done." return 0 fi #eval "grep \"WAN_EDU_KIT\" -i $WAN_CONF > /dev/null" #if [ $? -eq 0 ]; then # echo -e "done." # return 0 #fi eval "grep \"WAN_DEBUG\" -i $WAN_CONF > /dev/null" if [ $? -eq 0 ]; then echo -e "done." return 0 fi eval "grep \"WAN_MLINK_PPP\" -i $WAN_CONF > /dev/null" if [ $? -eq 0 ]; then echo -e "done." return 0 fi #NC: Used to be when we used PPPD but now we # use syncppp for PPPOA. This is just legacy # the code should be deleted once we are sure # we will never go back to tty model # eval "grep \"WAN_ADSL\" -i $WAN_CONF > /dev/null" # if [ $? -eq 0 ]; then # eval "grep \"PPP_.*_OA\" -i $WAN_CONF > /dev/null" # if [ $? -eq 0 ]; then # echo -e "done." # return 0 # fi # fi # cd $WAN_INTR_DIR # if [ -f $WAN_INTERFACE_PROC_FILE ]; then # INTERFACES=`cat $WAN_INTERFACE_PROC_FILE | grep $device | cut -d' ' -f1` # else INTERFACES=`grep ".*=.*$device" -i $WAN_CONF | cut -d' ' -f1 2> /dev/null` # fi # BASH INTERFACES=${INTERFACES// /} INTERFACES=${INTERFACES%% } if [ -z "$INTERFACES" ]; then error "No interface definitions found in $WAN_CONF" return 1 fi echo -n "Configuring interfaces: " for i in $INTERFACES do int_file=${i%%=*} #Not every system has egrep. Egrep uses the regular expression matching. check_command_exist egrep if [ $? -eq 0 ]; then API=`egrep "$int_file[[:space:]]*=" -i $WAN_CONF | cut -d',' -f3 2> /dev/null` else API=`grep "$int_file =" -i $WAN_CONF | cut -d',' -f3 2> /dev/null` fi #If the card is in backup mode, it will be used to monitor #the primary link. We don't want IP information, thus #we set the API field. This will cause the interface to #come up without IP information. eval "grep \"BACKUP.*=.*YES\" -i $WAN_CONF > /dev/null" if [ $? -eq 0 ]; then API=API fi #Substitution and replacement are no supported #on bash versions lower than 2.0 #if the card is configured as API, bring up all #interfaces without IP information. if [ ! -z $API ]; then #Remove all white spaces if [ "$AWK_SUPPORT" = YES ]; then API=`echo $API | awk '{ gsub(" ", "") ; print }'` elif [ "$BASH_SUPPORT" -gt 1 ]; then # BASH API=${API// /} API=${API%% } fi if [ "$API" = "API" ] || [ "$API" = "TDM_API" ] || [ "$API" = "API_LEGACY" ] ; then echo -n "$int_file " ifconfig $int_file up continue fi if [ "$API" = "TDM_VOICE_API" ] || [ "$API" = "TDM_SPAN_VOICE_API" ] || [ "$API" = "TDM_CHAN_VOICE_API" ]; then echo -n "$int_file " ifconfig $int_file up continue fi if [ "$API" = "DATA_API" ]; then echo -n "$int_file " ifconfig $int_file up continue fi if [ "$API" = TTY ]; then continue fi #brings up (for example wp1_fr16 and wp1_fr16e) #with IP addresses 0.0.0.0 if [ $API = "BRIDGE" ] || [ $API = "XMTP2_API" ];then # Bring up BRIDGE interface echo -n "$int_file " ifconfig $int_file up continue fi if [ $API = "TRUNK" ];then # Bring up Trunk interface echo -n "$int_file " ifconfig $int_file up continue fi if [ $API = "SWITCH" ];then # Bring up SWITCH interface echo -n "$int_file " ifconfig $int_file up continue fi if [ $API = "ANNEXG" ];then # Bring up SWITCH interface echo -n "$int_file " ifconfig $int_file up continue fi if [ $API = "VoIP" ] || [ $API = "TDM_VOICE" ] || [ $API = "TDM_VOICE_API" ] ;then # Bring up VoIP interface echo -n "$int_file " ifconfig $int_file up voip_flag=1 continue fi if [ $API = "PPPoE" ] || [ $API = "STACK" ];then # Bring up SWITCH interface echo -n "$int_file " ifconfig $int_file up continue fi fi if [ $NEW_IF_TYPE = YES ]; then if_file=ifcfg-$int_file; else if_file=$int_file; fi if [ ! -d "$WAN_INTR_DIR" ]; then error "Directory $WAN_INTR_DIR not found" return 1 fi cd $WAN_INTR_DIR if [ -s $if_file ]; then echo -n "$int_file " interface_up $int_file || { error "Failed to configure interface $int_file" continue } else echo "Error Interface File $int_file not found" return 1; fi done echo -e "\ndone." return 0 } # ---------------------------------------------------------------------------- # Stop WAN router. # o shut down interfaces # o unload WAN drivers # o remove lock file # ---------------------------------------------------------------------------- interf_down() { local device=$1 local WAN_CONF=$2 local int_file local INTERFACES # Shut down network interfaces. #if [ ! -d "$WAN_INTR_DIR" ]; then # return; #} INTERFACES=`grep ".*=.*$device" -i $WAN_CONF | cut -d' ' -f1 2> /dev/null` for i in $INTERFACES do int_file=${i%%=*} wanrouter_script stop $device $int_file #excutes interface stop script echo "Shutting down $device interface: $int_file" ifconfig $int_file down done } # ---------------------------------------------------------------------------- # Configure devices (all or single). # ---------------------------------------------------------------------------- config_devices() { # bASH local devices=$* local devices="$*" for dev in $devices; do if [ $OSYSTEM = "Linux" ] && [ ! -e "$ROUTER_PROC/$dev" ]; then echo -e "Error: Device $dev is not supported by kernel\n" continue fi WAN_CONF=$WAN_CONF_DIR/$dev.conf check_file $WAN_CONF || cleanup 1 check_exists $dev if [ $? -ne 0 ]; then echo "Error: Device $dev does not exist/not allocated." echo " Check the messages log for the number of probed " echo " devices." echo continue fi check_dev_running $dev if [ $? -eq 0 ]; then echo "Error: Device $dev is already running" echo -e " Run 'wanrouter stop $dev' first\n" continue fi #Since we changed the name of dev above, #we must check if we are running ft1 device, #output a correct message if [ $ft1_or_wanpipe -gt 0 ]; then echo "Starting up device: $dev, FT1 config mode" echo "Starting up device: $dev, FT1 config mode" >> $WAN_LOG else echo "Starting up device: $dev" echo "Starting up device: $dev" >> $WAN_LOG fi router_config $WAN_CONF $dev #NC: Jul 22 2003 #Just because one card #fails to load do not stop #other cards from loading # if [ $? -ne 0 ]; then # #echo "Exiting rc = 3" # cleanup 3 # fi done return 0 } # ---------------------------------------------------------------------------- # Unconfigure devices (all or single). # ---------------------------------------------------------------------------- unconfig_devices() { # bASH local devices=$* local devices="$*" #Stop all routers but check if device #is running first for dev in $devices; do WAN_CONF=$WAN_CONF_DIR/$dev.conf #If we are starting ft1 device there are no #interfaces. wanrouter_script stop $dev if [ $ft1_or_wanpipe -gt 0 ]; then echo "Shutting down device: $dev, FT1 config mode" echo "Shutting down device: $dev, FT1 config mode" >> $WAN_LOG else echo "Shutting down device: $dev" echo "Shutting down device: $dev" >> $WAN_LOG fi router_unconfig $WAN_CONF $dev done #Check if any devices are still running # If YES: don't unload the modules, just printout # the list of active devices # If NO: unload modules check_and_print_still_running && cleanup 0 cd $WAN_HOME echo -e "No devices running, Unloading Modules" unload_module remove_cdev for dev in $devices; do WAN_CONF=$WAN_CONF_DIR/$dev.conf INTERFACES=`grep ".*=.*$dev" -i $WAN_CONF | cut -d' ' -f1 2> /dev/null` for ifname in $INTERFACES; do ifname=${ifname%%=*} done done return 0 } # ---------------------------------------------------------------------------- # Configure wan interfaces (all or single). # ---------------------------------------------------------------------------- config_interfaces() { # bASH local devices=$* local devices="$*" for dev in $devices; do WAN_CONF=$WAN_CONF_DIR/$dev.conf check_file $WAN_CONF || cleanup 1 interf_config $dev $WAN_CONF #NC: Jul 22 2003 #Just because one interface #fails to load, do not stop all #other interfaces. # if [ $? -ne 0 ]; then # cleanup 4 # fi done for dev in $devices; do WAN_CONF=$WAN_CONF_DIR/$dev.conf INTERFACES=`grep ".*=.*$dev" -i $WAN_CONF | cut -d' ' -f1 2> /dev/null` for ifname in $INTERFACES; do ifname=${ifname%%=*} wanrouter_script start $dev $ifname done wanrouter_script start $dev done return 0 } # ---------------------------------------------------------------------------- # unconfigure interface (all or single). # ---------------------------------------------------------------------------- unconfig_interfaces() { # bASH local devices=$* local devices="$*" #Stop all interfaces, but check whether #device is running first for dev in $devices; do if [ "$dev" = "" ]; then continue; fi WAN_CONF=$WAN_CONF_DIR/$dev.conf #Check that all configuration files exist check_file $WAN_CONF || cleanup 1 check_exists $dev if [ $? -eq 0 ]; then check_dev_running $dev if [ $? -eq 0 ]; then WAN_CONF=$WAN_CONF_DIR/$dev.conf interf_down $dev $WAN_CONF fi fi done return 0 } router_unconfig() { if [ $OSYSTEM != "Linux" ]; then [ -e "$CDEV_WANROUTER" ] || { return } fi if [ "$WAN_DYN_WANCONFIG" = YES ]; then eval "/usr/sbin/wanconfig_client cmd=stop,card=$2" else wanconfig -v -d $1 -a $WAN_ADSL_LIST >> $WAN_LOG fi # Unload WAN drivers. } #---------------------------------------------------------------------------- # Remove character device /dev/wanrouter #---------------------------------------------------------------------------- remove_cdev() { if [ $OSYSTEM = "FreeBSD" ]; then [ -e "$CDEV_WANROUTER" ] && { rm $CDEV_WANROUTER } fi } unload_module() { cd $WAN_HOME rm -f $WANPIPE_IS_RUNNING if [ $RUGGEDCOM = "Yes" ]; then sleep 2 if lsof | grep '/proc/net/wanrouter' -q; then echo "/proc/net/wanrouter still busy! Failed to make ledtask release..." touch $WANPIPE_IS_RUNNING return 0 fi fi if [ -z $FLAG_UNLOAD_NO_CHECK ] then check_and_print_still_running && cleanup 1 fi if [ $OSYSTEM = "Linux" ]; then wansock_config UNLOAD annexg_config UNLOAD elif [ $OSYSTEM = "OpenBSD" ]; then if [ $SECURELEVEL -gt 0 ]; then echo "Error: Your securelevel does not allow to load kernel modules!" return 1 fi fi wanec_config UNLOAD lip_config UNLOAD if [ $DEPMOD = YES ]; then for i in $WAN_DRIVERS do $MODULE_STAT | grep -q $i && { unload_driver $i } done else for i in $UMODULES do unload_driver $i done fi wan_force_unload_modules } wanec_config () { local opt=$1 if [ "$WANEC_LOAD" != "YES" ]; then return 0 fi if [ $OSYSTEM != "FreeBSD" -a $OSYSTEM != "Linux" ]; then return 0 fi file_exist $MOD10 if [ $? -ne 0 ]; then return 0 fi if [ $opt = UNLOAD ]; then lsmods=`$MODULE_STAT` for i in $WANEC_UNLOAD_DRIVERS do echo "$lsmods" | grep -q "$i" && { get_mod_name $WANEC_MOD_DIR $i if ! unload_driver $module_name then return 1 fi } done else for i in $WANEC_LOAD_DRIVERS do $MODULE_STAT | grep -q $i && continue get_mod_name $WANEC_MOD_DIR $i if ! load_driver $module_name then return 1 fi done fi return 0 } lip_config () { local opt=$1 if [ "$WAN_LIP_LOAD" != "YES" ]; then return 0 fi if [ $OSYSTEM != "FreeBSD" -a $OSYSTEM != "Linux" ]; then return 0 fi file_exist $MOD9 if [ $? -ne 0 ]; then return 0 fi if [ $opt = UNLOAD ]; then lsmods=`$MODULE_STAT` for i in $LIP_UNLOAD_DRIVERS do echo "$lsmods" | grep -q "$i" && { get_mod_name $WANPIPE_LIP_MOD_DIR $i if ! unload_driver $module_name then return 1 fi } done else for i in $LIP_LOAD_DRIVERS do $MODULE_STAT | grep -q $i && continue get_mod_name $WANPIPE_LIP_MOD_DIR $i if ! load_driver $module_name then return 1 fi done fi return 0 } mod_error() { echo -e "\n" error "Wanpipe Module: $1 not found !!!" if [ $OSYSTEM = "Linux" ]; then echo -e " WANPIPE drivers must be compiled as modules" echo -e " Check kernel configuration in /usr/src/linux/.config: " echo -e " CONFIG_WAN_ROUTER=m" echo -e " CONFIG_VENDOR_SANGOMA=m\n" else echo -e "WANPIPE drivers are modules files. " echo -e "Try to re-compile WANPIPE drivers." fi } get_distrib() { grep -i "red *hat" "/etc/issue" > /dev/null if [ $? -eq 0 ] then return 1; #RedHat Found else return 0; fi } check_config() { for dev in $WAN_DEVICES; do check_file "$WAN_CONF_DIR/$dev.conf" || { return 1; } done return 0; } check_file() { local file=$1 [ ! -f "$file" ] && { if [ ! -z $file ]; then echo -e "ERROR: Wanpipe configuration file not found:" echo -e " $file\n" else echo -e "ERROR: Wanpipe configuration file not found in $WAN_CONF_DIR\n" fi return 1; } return 0; } print_active_devices() { local ac_list; local ac_wan; local rc=0; local silent=${1:-0} local devices echo "Devices currently active:" echo -n " " if [ $OSYSTEM = "Linux" ]; then #If /proc directory doesn't exist nothing #to print, thus exit [ ! -d "$ROUTER_PROC" ] && return 0 devices=`cat $ROUTER_PROC/status | cut -d' ' -f1 | grep wanpipe | sort` else check_module if [ $? -ne 0 ]; then return 0 fi devices=`wanconfig status | cut -d' ' -f1 | grep wanpipe | sort` fi if [ ! -z "$devices" ]; then if [ $silent -ne 0 ]; then echo $devices fi rc=1; fi echo -e "\n" return $rc } check_exists () { local device=$1 if [ $OSYSTEM = "Linux" ]; then [ ! -d "$ROUTER_PROC" ] && return 1 #Device not running if [ ! -f $ROUTER_PROC/$device ]; then echo "Error: Device $device does not exist/not allocated." echo " Check the messages log for the number of probed devices." echo return 1 fi fi # Device exists return 0 } check_dev_running () { local device=$1 local res if [ $OSYSTEM = "Linux" ]; then [ ! -d "$ROUTER_PROC" ] && return 1 #Device not running res=`cat $ROUTER_PROC/status | grep "$device "` else check_module if [ $? -ne 0 ]; then return 1 fi res=`wanconfig status | grep "$device "` fi [ ! -z "$res" ] && { #Device running return 0 } #Device not running return 1; } check_and_print_still_running () { local devices if [ $OSYSTEM = "Linux" ]; then if [ ! -d $ROUTER_PROC ]; then return 1 fi devices=`cat $ROUTER_PROC/status | cut -d' ' -f1 | grep wanpipe | sort` else check_module if [ $? -ne 0 ]; then return 1 fi devices=`wanconfig status | cut -d' ' -f1 | grep wanpipe | sort` fi if [ ! -z "$devices" ]; then echo "Devices Still Running:" # BASH echo -en "\t" echo -n " " echo $devices echo return 0 fi return 1 } create_ft1_conf () { local dev=$1 local res wandev=`grep "wanpipe.*=" $WAN_CONF_DIR/$dev.conf 2> /dev/null` res=$? if [ $res -eq 0 ]; then wandev=${wandev%%=*} if [ $AWK_SUPPORT = YES ]; then eval "wandev=`echo $wandev | awk '{ gsub(" ", "") ; print }'`" elif [ $BASH_SUPPORT -gt 1 ]; then # BASH wandev=${wandev// /} wandev=${wandev%% } fi else echo -e "Error: Device name not found in $WAN_CONF_DIR/$dev.conf\n" cleanup 1 fi wancard=`grep "CARD_TYPE.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` wancpu=`grep "S514CPU.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` wanslot_auto=`grep "AUTO_PCISLOT.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` wanslot=`grep "PCISLOT.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` wanbus=`grep "PCIBUS.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` wanio=`grep "IOPORT.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` wanirq=`grep "IRQ.*=.*" -i $WAN_CONF_DIR/$dev.conf 2> /dev/null` if [ -z "$wancard" ]; then echo -e "Error: Missing fileds in $WAN_CONF_DIR/$dev.conf" echo -e " configuraton file, in [$wandev] section.\n " cleanup 1 fi if [ -z "$wancpu" -o -z "$wanslot" ]; then if [ -z "$wanio" -o -z "$wanirq" ]; then echo -e "Error: Missing fileds in $WAN_CONF_DIR/$dev.conf" echo -e " configuraton file, in [$wandev] section.\n " cleanup 1 fi fi cat < $WAN_CONF_DIR/$FT1_CONF #FT1 Configuration File # # Note: This file was automatically generated by wanrouter # script. # DO NOT CHANGE IT # # CHDLC Protocol is used since, its firmware is the # only one with FT1 configuration functions. [devices] $wandev = WAN_CHDLC, Cisco HDLC Firmware [$wandev] $wancard $wancpu $wanslot_auto $wanslot $wanbus $wanio $wanirq Firmware = $WAN_HOME/firmware/cdual514.sfm # adapter firmware #--------------------- END OF FT1 CONFIGURATION ------------------------ EOM } check_config_opt () { local dev=$1 local opt=$2 case $dev in ft1_wanpipe*) #Strip off 'ft1_' from 'ft1_wanpipe#' dev=${dev##ft1_} #Check if wanpipe#.conf file exists check_file "$WAN_CONF_DIR/$dev.conf" if [ $? -gt 0 ]; then cleanup 1 fi #If we are starting the router up, create #the ft1.conf file in $WAN_CONF_DIR directory if [ $opt -eq 0 ]; then create_ft1_conf $dev fi #Return string ft1 result "ft1" #Get the wanpipe device number, and return it #as a return code. This indicates that we want #to setup ft1 device dev=${dev##wanpipe} if [ $AWK_SUPPORT = YES ]; then dev=`echo $dev | awk '{ gsub(" ", "") ; print }'` elif [ $BASH_SUPPORT -gt 1 ]; then # BASH dev=${dev// /} dev=${dev%% } fi return $dev ;; wanpipe*) #Check if wanpipe#.conf file exists check_file "$WAN_CONF_DIR/$dev.conf" if [ $? -gt 0 ]; then cleanup 1 fi #return string wanpipe# result $dev #return zero which indicates that we #want to startup reglar wanpipe device #not ft1 device return 0 ;; *) #Illegal syntax obtained echo "Error: Incorrect device name syntax !" cleanup 1 ;; esac } check_ft1_config () { local ft1=$1 if [ $ft1 = ft1 ]; then return 0 else return 1 fi } result () { echo $1 > $RC } check_osystem () { if [ $OSYSTEM = "Linux" ]; then if [ -d $WAN_LOCK_DIR ]; then return 0 else echo echo "Warning: WAN_LOCK_DIR = $WAN_LOCK_DIR does not exist!" echo "Please update the WAN_LOCK_DIR in /etc/wanpipe/wanrouter.rc" echo fi if [ -d /var/lock/subsys ]; then WAN_LOCK_DIR=/var/lock/subsys elif [ -d /var/lock ]; then WAN_LOCK_DIR=/var/lock else WAN_LOCK_DIR=$WAN_CONF_DIR fi fi } wansock_config () { local opt=$1 if [ $OSYSTEM != "Linux" ]; then return 0 fi file_exist $MOD5 if [ $? -ne 0 ]; then return 0 fi if [ $DEPMOD != YES ]; then return 0 fi if [ $opt = UNLOAD ]; then $MODULE_STAT | grep -q "$AF_WANPIPE_DRIVERS" && { unload_driver $AF_WANPIPE_DRIVERS } else load_driver $AF_WANPIPE_DRIVERS fi return 0 } annexg_config () { local opt=$1 if [ $OSYSTEM != "Linux" ]; then return 0 fi if [ "$WAN_ANNEXG_LOAD" != "YES" ]; then return 0 fi file_exist $MOD6 if [ $? -ne 0 ]; then return 0 fi file_exist $MOD7 if [ $? -ne 0 ]; then return 0 fi file_exist $MOD8 if [ $? -ne 0 ]; then return 0 fi if [ $DEPMOD != YES ]; then return 0 fi if [ $opt = UNLOAD ]; then lsmods=`$MODULE_STAT` for i in $ANNEXG_UNLOAD_DRIVERS do echo "$lsmods" | grep -q "$i" && { unload_driver $i } done else for i in $ANNEXG_LOAD_DRIVERS do load_driver $i done fi return 0 } print_wanpipe_config () { echo -e "Wanpipe Config:\n" if [ $OSYSTEM = "Linux" ]; then cat /proc/net/wanrouter/config | sort else wanconfig config fi } print_wanrouter_status () { echo -e "\nWanrouter Status:\n" if [ $OSYSTEM = "Linux" ]; then cat /proc/net/wanrouter/status | sort else wanconfig status fi } print_config_summary () { local pfiles; local pfile; local pdev; cd $WAN_HOME pfiles=`ls wanpipe*\.conf 2> /dev/null` if [ $? -ne 0 ]; then echo "No Wanpipe configuration files found in $WAN_HOME"; return; fi echo -e "Configuration File Summary in : $WAN_HOME/\n" echo -e "Device\t\tProtocol\tType Cpu/Io Slot/Irq Bus\tState" echo -e "------------------------------------------------------------------------" for pfile in $pfiles do #Test for invalid file: wanpipe1.conf.tmp" echo $pfile | grep ".*\..*\..*" > /dev/null 2> /dev/null if [ $? -eq 0 ]; then continue fi pdev=`grep "^wanpipe*=*" $pfile | cut -d'=' -f1 | cut -d' ' -f1 2> /dev/null` if [ $? -ne 0 ]; then continue fi if [ -z "$pdev" ]; then continue fi echo -n "$pdev " pprot=`grep "^wanpiped*=*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` if [ $? -ne 0 ]; then continue fi if [ -z $pprot ]; then continue fi if [ $pprot = WAN_X25 ] || [ $pprot = WAN_PPP ] || [ $pprot = WAN_FR ] || [ $pprot = WAN_MFR ] || [ $pprot = WAN_BSC ] || [ $pprot = WAN_AFT ] || [ $pprot = WAN_SS7 ] || [ $pprot = WAN_POS ] || [ $pprot = WAN_ATM ]; then #echo -e -n "$pprot\t\t" echo -n "$pprot " else echo -n "$pprot " fi phw=`grep "^S514CPU*" $pfile` if [ $? -eq 0 ]; then echo -n "PCI " pcpu=`grep -i "^S514CPU*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` echo -n "$pcpu " pslot=`grep -i "^PCISLOT*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` echo -n "$pslot " pbus=`grep -i "^PCIBUS*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` if [ -z $pbus ]; then echo -n "0 " else echo -n "$pbus " fi else if [ $pprot = WAN_ADSL ]; then echo -n "PCI " echo -n "N/A " pslot=`grep -i "^PCISLOT*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` echo -n "$pslot " pbus=`grep -i "^PCIBUS*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` if [ -z $pbus ]; then echo -n "0 " else echo -n "$pbus " fi else echo -n "ISA " pport=`grep -i "^IOPORT*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` echo -n "$pport " pport=`grep -i "^IRQ*" $pfile | cut -d'=' -f2 | awk '{ gsub(" ", "") ; print }' | cut -d',' -f1` echo -n "$pport " echo -n "n/a " fi fi if [ $OSYSTEM = "Linux" ]; then if [ -e /proc/net/wanrouter ]; then pstate=`cat /proc/net/wanrouter/status | grep $pdev | cut -d'|' -f4 | awk '{ gsub(" ", "") ; print }'` else pstate="" fi else check_module if [ $? -eq 0 ]; then pstate=`wanconfig status | grep $pdev | cut -d'|' -f4 | awk '{ gsub(" ", "") ; print }'` else pstate="" fi fi if [ -z $pstate ]; then echo -n "Inactive" else echo -n "$pstate" fi echo done } wanrouter_if_debug() { echo echo "Debug Info for $1" echo echo "WANPIPE Release: $ROUTER_VERSION" echo echo eval "$IFCONFIG_LIST | grep -w $1 >> /dev/null 2>>/dev/null" if [ $? -ne 0 ]; then check_dev_running $1 if [ $? -eq 0 ]; then wanconfig -D $1 return; fi echo echo "Error: Interface $1 does not exist!" echo cleanup 1 return; fi if [ ! -f /usr/sbin/wanpipemon ]; then echo echo "Error: /usr/sbin/wanpipemon not found" echo "Solution: Re-install latest wanpipe release" echo return; fi eval "/usr/sbin/wanpipemon -i $1 -c xm 2>> /dev/null" if [ $? -ne 0 ]; then echo echo "Error: /usr/sbin/wanpipemon failed!" echo " Make sure $1 is a valid wanpipe interface" echo " Otherwise call Sangoma Tech Support" echo return fi sleep 3 eval "/usr/sbin/wanpipemon -i $1 -c sc" if [ $? -ne 0 ]; then echo echo "Error: /usr/sbin/wanpipemon failed!" echo " Make sure $1 is a valid wanpipe interface" echo " Otherwise call Sangoma Tech Support" echo return fi sleep 2 eval "/usr/sbin/wanpipemon -i $1 -c sc" if [ $? -ne 0 ]; then echo echo "Error: /usr/sbin/wanpipemon failed!" echo " Make sure $1 is a valid wanpipe interface" echo " Otherwise call Sangoma Tech Support" echo return fi sleep 5 echo "Start WANPIPE /var/log/messages" echo if [ $OSYSTEM = "Linux" ]; then eval "tail -n 200 /var/log/messages | grep -i \"[wanpipe|sdladrv]\" " else eval "tail -n 200 /var/log/messages | grep -i \"wanpipe\|sdladrv\" " fi echo echo "End of WANPIPE /var/log/messages" echo sleep 5 echo echo "---------- Starting Trace [ PRESS ENTER TO STOP ] ---------" echo sleep 3 eval "/usr/sbin/wanpipemon -i $1 -c tr" if [ $? -ne 0 ]; then echo echo "Error: /usr/sbin/wanpipemon failed!" echo " Make sure $1 is a valid wanpipe interface" echo " Otherwise call Sangoma Tech Support" echo fi } pci_parity_ctrl () { local parity_cmd; local pdev; local IDS; local verbosity=${2:-1} if [ $OSYSTEM != "Linux" ]; then echo "Error: PCI Parity Ctrl only available on Linux" echo return fi IDS=`lspci | cut -d' ' -f1` if [ -z $1 ]; then echo "Displaying System PCI Parity Configuration"; echo "==========================================" echo lspci -vvv | grep Parity echo echo "==========================================" return fi parity_cmd=${1:-"off"} if [ $parity_cmd != "on" ]; then parity_cmd="off"; fi eval "type setpci 2> /dev/null > /dev/null" if [ $? -ne 0 ]; then echo "Parity Set Error: setpci utility not found!" return fi if [ $verbosity -gt 0 ]; then echo "Setting PCI Parity to $parity_cmd"; fi for pdev in $IDS do if [ "$parity_cmd" = "on" ]; then eval "setpci -s $pdev 3e.b=0x7" else eval "setpci -s $pdev 3e.b=0x4" fi done return } wanrouter_pre_start() { if [ "$WAN_PCI_PARITY" = "OFF" ]; then echo "Wanrouter: Disabling PCI Parity on Start!" >> $WAN_LOG; pci_parity_ctrl "off" 0 elif [ "$WAN_PCI_PARITY" = "ON" ]; then echo "Wanrouter: Enabling PCI Parity on Start!" >> $WAN_LOG; pci_parity_ctrl "on" 0 fi } wanrouter_debug () { local err=0 echo if [ ! -d $WAN_HOME ]; then echo "Error: $WAN_HOME not found" echo "Reason: Wanpipe not installed properly" echo "Solution: Re-install wanpipe" return fi check_module if [ $? -ne 0 ]; then load_module if [ $? -ne 0 ]; then if [ $OSYSTEM = "Linux" ]; then echo "Error: /proc/net/wanrouter not found" fi echo "Reason: Wanpipe kernel modules failed to load" echo "Solution: Run 'wanrouter hwprobe' or 'wanrouter start'" echo " Contact Sangoma Tech Support" echo return fi unload_module fi if [ ! -f $WAN_HOME/wanpipe1.conf ]; then echo "Warning: wanpipe1.conf configuration file not found" echo "Reason: did not run /usr/sbin/wancfg to create it" echo "Solution: run /usr/sbin/wancfg :)" echo err=1 fi eval "grep -i invalid $WAN_LOG" if [ $? -eq 0 ]; then echo echo "Error: Configuration file syntax error in $WAN_LOG" echo "Reason: Miss-configuration: run 'wanrouter conflog'" echo "Solution: Re-run /usr/sbin/wancfg and configure all variables " echo err=1 fi eval "tail -n 20 /var/log/messages | grep -i \"wanpipe.*error[,:]\" " if [ $? -eq 0 ]; then echo "------------------------------------------" echo "Error: Error occured during wanrouter startup/shutdown" echo "Reason: Check /var/log/messages file: run 'wanrouter messages'" echo "Solution: Review /var/log/messages and contact Sangoma Tech Support" echo err=1 else eval "tail -n 20 /var/log/messages | grep -i \"sdladrv.*invalid[,:]\"" if [ $? -eq 0 ]; then echo "------------------------------------------" echo "Error: Config error occured during wanrouter startup/shutdown" echo "Reason: Check /var/log/messages file: run 'wanrouter messages'" echo "Solution: Review /var/log/messages and contact Sangoma Tech Support" echo err=1 else eval "tail -n 20 /var/log/messages | grep -i \"wanpipe.*warning\" " if [ $? -eq 0 ]; then echo "------------------------------------------" echo "Warning: Warning occured during wanrouter startup/shutdown" echo "Reason: Check /var/log/messages file" echo "Solution: Review /var/log/messages and contact Sangoma Tech Support" echo err=1 fi fi fi if [ $err -eq 0 ]; then echo "Wanpipe environment/utilites/modules/operation OK" fi echo } check_command_exist () { local cmd=$1 local cmd_rc if [ $OSYSTEM = "Linux" ]; then eval "type $1 > /dev/null 2> /dev/null" else eval "which $1 > /dev/null 2> /dev/null" fi cmd_rc=$? return $cmd_rc } init_meta_conf () { ROUTER_BOOT= WANPIPE_CONF_DIR= WANPIPE_INTR_DIR= ROUTER_LOG= ROUTER_LOCK= ROUTER_IP_FORWARD= NEW_IF_TYPE= WANCFG_LIB= WAN_DEVICES= ROUTER_BOOT= WAN_CONF_DIR= WAN_INTR_DIR= WAN_LOG= WAN_LOCK= WAN_LOCK_DIR= WAN_IP_FORWARD= NEW_IF_TYPE= WAN_LIB_DIR= WAN_ADSL_LIST= WAN_DEVICES= } read_meta_conf () { if [ $OSYSTEM = "Linux" ]; then WAN_HOME=/etc/wanpipe elif [ $OSYSTEM = "FreeBSD" -o $OSYSTEM = "OpenBSD" ]; then WAN_HOME=/usr/local/etc/wanpipe wanrouter_rc_file="" if [ -r /etc/rc.conf ]; then . /etc/rc.conf fi if [ -n "$wanrouter_rc_file" ]; then WAN_HOME=${wanrouter_rc_file%/*} fi fi WAN_CONF_DIR=$WAN_HOME META_CONF=$WAN_HOME/wanrouter.rc WAN_INTR_DIR=$WAN_HOME/interfaces # Read meta-configuration file. if [ -f $META_CONF ] then . $META_CONF else return 1 fi return 0 } meta_conf_compatiblity () { WAN_CONF_DIR=$WANPIPE_CONF_DIR WAN_INTR_DIR=$WANPIPE_INTR_DIR WAN_LOG=$ROUTER_LOG WAN_LOCK=$ROUTER_LOCK WAN_LOCK_DIR=${ROUTER_LOCK%/*} WAN_IP_FORWARD=$ROUTER_IP_FORWARD WAN_LIB_DIR=$WANCFG_LIB WAN_ADSL_LIST=$WANPIPE_CONF_DIR/wan_adsl.list } wanrouter_script() { local cmd=$1 local dev=$2 local ifname=$3 #echo "Starting Script: $WAN_SCRIPTS_DIR/$dev-$ifname-$cmd" if [ "$ifname" != "" ]; then #Interface name exists if [ -f "$WAN_SCRIPTS_DIR/$dev-$ifname-$cmd" ]; then eval "sh $WAN_SCRIPTS_DIR/$dev-$ifname-$cmd $dev $ifname" fi elif [ "$dev" != "" ]; then #Device name exists if [ -f "$WAN_SCRIPTS_DIR/$dev-$cmd" ]; then eval "sh $WAN_SCRIPTS_DIR/$dev-$cmd $dev" fi else #Global Cmd if [ -f "$WAN_SCRIPTS_DIR/$cmd" ]; then eval "sh $WAN_SCRIPTS_DIR/$cmd" fi fi } generate_adsl_list() { local vci=0; local vpi=0; echo "35 0" > $WAN_ADSL_LIST echo "35 8" >> $WAN_ADSL_LIST vci=30 vpi=0 while [ 1 ]; do while [ 1 ]; do echo "$vci $vpi" >> $WAN_ADSL_LIST vpi=$((vpi+1)) if [ $vpi = 10 ]; then vpi=0 break; fi done vci=$((vci+1)) if [ $vci -eq 40 ]; then vci=30 break; fi done } # FIXME: Add code for BSD wan_force_unload_modules() { if [ $OSYSTEM = "Linux" ]; then if [ -e "$ROUTER_PROC" ] && [ -e "$ROUTER_PROC/status" ]; then wp_list=`cat $ROUTER_PROC/status | cut -d' ' -f1 | grep wanpipe | sort -r` if [ -z $wp_list ]; then mod_list=`cat /proc/modules | grep wan | cut -d ' ' -f1 | xargs` for tmp_mod in $mod_list do eval "rmmod $tmp_mod >> /dev/null 2>> /dev/null" done fi fi fi } # FIXME: Add code for BSD stop_running_wanpipes () { if [ $OSYSTEM = "Linux" ]; then if [ -e "$ROUTER_PROC/status" ]; then wp_list=`cat $ROUTER_PROC/status | cut -d' ' -f1 | grep wanpipe | sort -r` for list in $wp_list do # BASH list=${list// /}; list=${list%% }; if [ ! -z $list ]; then eval "rm -f $WAN_PROG_LOCK 2> /dev/null > /dev/null" wanrouter stop $list fi done wan_force_unload_modules fi fi } config_wanrouter_rc () { local sequence local num local val cat << EOM WANPIPE STARTUP CONFIG Current Wanpipe devices configured to start on bootup: $WAN_DEVICES Please specify new startup string: eg: wanpipe1 wanpipe2 ... Note: Single space must exist between device names. EOM echo -n "Enter Wanpipe Startup Sequence: " read sequence if [ -z "$sequence" ]; then echo echo "Error: startup sequence must contain at least one device name" echo " eg: wanpipe1" echo return fi eval "echo $sequence | grep \"wanpipe\d*\" > /dev/null 2> /dev/null" if [ $? -ne 0 ]; then echo echo "Error: startup sequence must contain at least one device name" echo " eg: wanpipe1" echo return fi echo echo "New Sequence is: $sequence" echo getyn "Is the above sequence correct ?" if [ $? -eq 0 ]; then echo echo "Setting wanpipe startup sequence to: $sequence" echo cat $META_CONF | grep "WAN_DEVICES=" -v > $WAN_HOME/tmp.$$ echo "WAN_DEVICES=\"$sequence\"" >> $WAN_HOME/tmp.$$ cat $WAN_HOME/tmp.$$ > $META_CONF fi } init_global_params() { if [ $OSYSTEM = "Linux" ]; then ROUTER_VERSION=3.5.20.29 IFCONFIG_LIST=ifconfig MODULE_STAT=lsmod WAN_DRIVERS="wanpipe" AF_WANPIPE_DRIVERS=af_wanpipe ANNEXG_LOAD_DRIVERS="wanpipe_lapb wanpipe_x25 wanpipe_dsp" ANNEXG_UNLOAD_DRIVERS="wanpipe_dsp wanpipe_x25 wanpipe_lapb" LIP_LOAD_DRIVERS="wanpipe_lip" LIP_UNLOAD_DRIVERS="wanpipe_lip" WANEC_LOAD_DRIVERS="wanec" WANEC_UNLOAD_DRIVERS="wanec" MODULE_LOAD=modprobe MODULE_UNLOAD="modprobe -r" MODULE_EXT=".ko" DEPMOD=YES check_command_exist modprobe if [ $? -ne 0 ]; then check_command_exist insmod if [ $? -eq 0 ]; then DEPMOD=NO MODULE_LOAD=insmod MODULE_UNLOAD=rmmod fi fi MOD1=/lib/modules/sdladrv MOD2=/lib/modules/wanrouter MOD3=/lib/modules/wanpipe_syncppp MOD4=/lib/modules/wanpipe MOD5=/lib/modules/af_wanpipe if [ -d /lib/modules/$(uname -r) ]; then uname -r | grep "^2.4.*" > /dev/null if [ $? -eq 0 ]; then MODULE_EXT=".o" if [ -d /lib/modules/$(uname -r)/kernel ]; then MOD1=/lib/modules/$(uname -r)/kernel/drivers/net/wan/sdladrv MOD2=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanrouter MOD3=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_syncppp MOD4=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe MOD5=/lib/modules/$(uname -r)/kernel/net/wanrouter/af_wanpipe MOD6=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_lapb MOD7=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_x25 MOD8=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_dsp MOD9=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanpipe_lip WANPIPE_LIP_MOD_DIR=/lib/modules/$(uname -r)/kernel/net/wanrouter MOD10=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanec WANEC_MOD_DIR=/lib/modules/$(uname -r)/kernel/net/wanrouter fi else uname -r | grep "^2.6.*" > /dev/null if [ $? -eq 0 ]; then if [ -d /lib/modules/$(uname -r)/kernel ]; then MOD1=/lib/modules/$(uname -r)/kernel/drivers/net/wan/sdladrv MOD2=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanrouter MOD3=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_syncppp MOD4=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe MOD5=/lib/modules/$(uname -r)/kernel/net/wanrouter/af_wanpipe MOD6=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_lapb MOD7=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_x25 MOD8=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_dsp MOD9=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanpipe_lip WANPIPE_LIP_MOD_DIR=/lib/modules/$(uname -r)/kernel/net/wanrouter MOD10=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanec WANEC_MOD_DIR=/lib/modules/$(uname -r)/kernel/net/wanrouter fi else uname -r | grep "^3.0.*" > /dev/null if [ $? -eq 0 ]; then MOD1=/lib/modules/$(uname -r)/kernel/drivers/net/wan/sdladrv MOD2=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanrouter MOD3=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_syncppp MOD4=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe MOD5=/lib/modules/$(uname -r)/kernel/net/wanrouter/af_wanpipe MOD6=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_lapb MOD7=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_x25 MOD8=/lib/modules/$(uname -r)/kernel/drivers/net/wan/wanpipe_dsp MOD9=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanpipe_lip WANPIPE_LIP_MOD_DIR=/lib/modules/$(uname -r)/kernel/net/wanrouter MOD10=/lib/modules/$(uname -r)/kernel/net/wanrouter/wanec WANEC_MOD_DIR=/lib/modules/$(uname -r)/kernel/net/wanrouter else if [ -d /lib/modules/$(uname -r)/net ]; then MOD1=/lib/modules/$(uname -r)/net/sdladrv MOD2=/lib/modules/$(uname -r)/misc/wanrouter MOD3=/lib/modules/$(uname -r)/net/wanpipe_syncppp MOD4=/lib/modules/$(uname -r)/net/wanpipe MOD5=/lib/modules/$(uname -r)/misc/af_wanpipe MOD6=/lib/modules/$(uname -r)/net/wanpipe_lapb MOD7=/lib/modules/$(uname -r)/net/wanpipe_x25 MOD8=/lib/modules/$(uname -r)/net/wanpipe_dsp MOD9=/lib/modules/$(uname -r)/misc/wanpipe_lip WANPIPE_LIP_MOD_DIR=/lib/modules/$(uname -r)/misc MOD10=/lib/modules/$(uname -r)/misc/wanec WANEC_MOD_DIR=/lib/modules/$(uname -r)/misc fi fi fi fi fi MODULES="$MOD1 $MOD2 $MOD3 $MOD4 $MOD5" OPT_MODULES="$MOD3 $MOD5" UMODULES="af_wanpipe wanpipe wanpipe_syncppp wanrouter sdladrv" elif [ $OSYSTEM = "FreeBSD" ]; then SYSCTL=/sbin/sysctl AWK=/usr/bin/awk PKGINFO=/usr/sbin/pkg_info major_ver=${RELEASE%%.*} ROUTER_VERSION=`$PKGINFO | $AWK '$1~/wanpipe/ {print $1}'` ROUTER_VERSION=${ROUTER_VERSION#wanpipe-} IFCONFIG_LIST=ifconfig CDEV_WANROUTER=/dev/$SCRIPT CDEV_MAJOR=139 CDEV_MINOR=0 MODULE_STAT=kldstat MODULE_LOAD=kldload MODULE_UNLOAD=kldunload MODULE_EXT=".ko" DEPMOD=YES if [ "$major_ver" = "5" -o "$major_ver" = "6" ]; then MODULE_DIR=/boot/modules else MODULE_DIR=/modules fi if [ -z ${WAN_MODULE_DIR} ]; then WAN_MODULE_DIR=${MODULE_DIR} fi dir=`kldconfig -r |grep $WAN_MODULE_DIR 2>/dev/null` if [ -z $dir ]; then kldconfig -m $WAN_MODULE_DIR 2>/dev/null fi usymbol=`nm $WAN_MODULE_DIR/wanpipe.ko | grep " U zt_register" > /dev/null` if [ -n $usymbol ]; then kldconfig -m /usr/local/lib/zaptel 2>/dev/null fi MOD9="${WAN_MODULE_DIR}/wanpipe_lip" WANPIPE_LIP_MOD_DIR=${WAN_MODULE_DIR} MOD10="${WAN_MODULE_DIR}/wanec" WANEC_MOD_DIR=${WAN_MODULE_DIR} MODULES="${WAN_MODULE_DIR}/sdladrv ${WAN_MODULE_DIR}/wanrouter ${WAN_MODULE_DIR}/wanpipe" UMODULES="wanpipe_lip wanec wanpipe wanrouter sdladrv" WAN_DRIVERS="wanpipe" LIP_LOAD_DRIVERS="wanpipe_lip" LIP_UNLOAD_DRIVERS="wanpipe_lip" WANEC_LOAD_DRIVERS="wanec" WANEC_UNLOAD_DRIVERS="wanec" elif [ $OSYSTEM = "OpenBSD" ]; then SYSCTL=/sbin/sysctl AWK=/usr/bin/awk PKGINFO=/usr/sbin/pkg_info SECURELEVEL=`$SYSCTL -n kern.securelevel` ROUTER_VERSION=`$PKGINFO | $AWK '$1~/wanpipe/ {$1=""; print }'` IFCONFIG_LIST="ifconfig -a" CDEV_WANROUTER=/dev/$SCRIPT CDEV_MAJOR=139 CDEV_MINOR=0 POSTINSTALL=create_cdev MODULE_STAT=modstat MODULE_LOAD=modload MODULE_UNLOAD=modunload MODULE_DIR=/usr/lkm DEPMOD=YES if [ -z ${WAN_MODULE_DIR} ]; then WAN_MODULE_DIR=${MODULE_DIR} else if [ "${WAN_MODULE_DIR}" != ${MODULE_DIR} ]; then DEPMOD=NO fi fi MODULE_EXT=".o" MODULES="${WAN_MODULE_DIR}/wanpipe" UMODULES="wanpipe" WAN_DRIVERS="wanpipe" elif [ $OSYSTEM = "NetBSD" ]; then SYSCTL=/sbin/sysctl AWK=/usr/bin/awk PKGINFO=/usr/sbin/pkg_info SECURELEVEL=`$SYSCTL -n kern.securelevel` ROUTER_VERSION=`$PKGINFO | $AWK '$1~/wanpipe/ {$1=""; print }'` IFCONFIG_LIST="ifconfig -a" CDEV_WANROUTER=/dev/$SCRIPT CDEV_MAJOR=139 CDEV_MINOR=0 POSTINSTALL=create_cdev MODULE_STAT=modstat MODULE_LOAD=modload MODULE_UNLOAD=modunload MODULE_DIR=/usr/lkm DEPMOD=YES if [ -z ${WAN_MODULE_DIR} ]; then WAN_MODULE_DIR=${MODULE_DIR} else if [ "${WAN_MODULE_DIR}" != ${MODULE_DIR} ]; then DEPMOD=NO fi fi MODULE_EXT=".o" MODULES="${WAN_MODULE_DIR}/wanpipe" UMODULES="wanpipe" WAN_DRIVERS="wanpipe" fi return 0 } ####### MAIN ################################################################# # set -x RCDLINKS="0,K10 1,K10 2,S20 3,S20 4,S20 5,S20 6,K10" export PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/loca/bin:/usr/local/sbin export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib OSYSTEM=`uname -s` RELEASE=`uname -r` PROD=wanpipe SCRIPT=wanrouter REDHAT=/usr/src/redhat ROUTER_PROC=/proc/net/wanrouter WAN_PROG_LOCK=/var/lock/wanrouter_lock DEPMOD=YES LINEPROBE_PATH=/usr/sbin/lineprobe WANPIPE_IS_RUNNING=/var/run/wanpipe_is_running RUGGEDCOM=No check_bash check_awk # Return code RC=$(pwd)/return_code GET_RC="cat $RC" FT1_CONF=ft1.conf # Ignore interrupt signals. trap '' 2 init_meta_conf read_meta_conf if [ $? -ne 0 ]; then echo "$SCRIPT: Error: $META_CONF not found!" exit 1; fi if [ "$WANPIPE_CONF_DIR" != "" -a "$WAN_CONF_DIR" = "" ] || [ "$WAN_ADSL_LIST" = "" ]; then meta_conf_compatiblity fi init_global_params WAN_LIP_LOAD=YES WANEC_LOAD=YES WAN_ANNEXG_LOAD=${WAN_ANNEXG_LOAD:-NO} WAN_DYN_WANCONFIG=${WAN_DYN_WANCONFIG:-NO} NEW_IF_TYPE=${NEW_IF_TYPE:-NO} WAN_INTR_DIR=$WAN_INTR_DIR LINUX_DISTR=unknown if [ -f $WAN_PROG_LOCK ]; then echo -e "\nERROR: wanrouter script already running!\n"; cleanup 0; fi touch $WAN_PROG_LOCK check_osystem #Check osystem confirms the WAN_LOCK directory WAN_LOCK=$WAN_LOCK_DIR/wanrouter if [ ! -f $WAN_ADSL_LIST ]; then generate_adsl_list fi if [ $OSYSTEM = "Linux" ]; then eval "grep \"Debian\" -i /etc/issue > /dev/null" if [ $? -eq 0 ]; then LINUX_DISTR=debian fi eval "grep \"Red *Hat\" -i /etc/issue > /dev/null" if [ $? -eq 0 ]; then LINUX_DISTR=redhat fi eval "grep \"Mandrake\" -i /etc/issue > /dev/null" if [ $? -eq 0 ]; then LINUX_DISTR=redhat fi if [ "$WAN_DYN_WANCONFIG" = "YES" ]; then if [ ! -e "/etc/wanpipe/wanconfig_socket" ]; then echo "Starting wanconfig dameon" eval "/usr/sbin/wanconfig -x >> $WAN_LOG 2>> $WAN_LOG &" if [ $? -ne 0 ]; then echo "Failed to start wanconfig daemon!" cleanup 0; fi else if [ ! -e "/var/run/wanconfig.pid" ]; then echo "Starting wanconfig dameon" \rm -f /etc/wanpipe/wanconfig_socket eval "/usr/sbin/wanconfig -x >> $WAN_LOG 2>> $WAN_LOG &" if [ $? -ne 0 ]; then echo "Failed to start wanconfig daemon!" cleanup 0; fi else kill -USR1 $(cat /var/run/wanconfig.pid) >> /dev/null 2>> /dev/null if [ $? -ne 0 ]; then echo "Starting wanconfig dameon" \rm -f /etc/wanpipe/wanconfig_socket eval "/usr/sbin/wanconfig -x >> $WAN_LOG 2>> $WAN_LOG &" if [ $? -ne 0 ]; then echo "Failed to start wanconfig daemon!" cleanup 0; fi fi fi fi else if [ -e "/etc/wanpipe/wanconfig_socket" ]; then if [ -f /var/run/wanconfig.pid ]; then eval "kill -TERM $(cat /var/run/wanconfig.pid)" echo "Killing wanconfig daemon" fi fi fi fi echo # If modules doesn't loaded remove all lock file from WAN_LOCK_DIR. check_module ft1_or_wanpipe=0 # See how we were called. case "$1" in start) # WANROUTER START if [ -z $2 ]; then check_config || cleanup 1 load_module if [ $? -ne 0 ]; then cleanup 2 fi wanrouter_pre_start; config_devices $WAN_DEVICES config_interfaces $WAN_DEVICES wanrouter_script start elif [ -z $3 ]; then #ROUTER START WANPIPE [ -f $WAN_CONF_DIR/$FT1_CONF ] && rm -f $WAN_CONF_DIR/$FT1_CONF dev=$2 #Parse the dev name, and if it starts with #ft1 than it means we should load the ft1 #driver. check_config_opt $dev 0 ft1_or_wanpipe=$? dev=$($GET_RC) rm -f $RC WAN_CONF=$WAN_CONF_DIR/$dev.conf check_file $WAN_CONF || cleanup 1 load_module if [ $? -ne 0 ]; then cleanup 2 fi #If we are starting FT1 driver, we have to check #wether the actual wanpipe# device is running or #not, thus name dev has to be changed to 'wanpipe#' if [ $ft1_or_wanpipe -gt 0 ]; then dev="wanpipe$ft1_or_wanpipe" fi wanrouter_pre_start; config_devices $dev if [ $? -ne 0 ]; then cleanup 3 fi #When loading ft1 device there are not interfaces if [ $ft1_or_wanpipe -eq 0 ]; then config_interfaces $dev if [ $? -ne 0 ]; then cleanup 4 fi fi else #ROUTER START WANPIPE INTERFACE if [ $OSYSTEM != "Linux" ]; then echo " This option doesn't supported yet!" cleanup 0 fi dev=$2 if_name=$3 #Parse the dev name, and if it starts with #ft1 than it means we should load the ft1 #driver. check_config_opt $dev 0 ft1_or_wanpipe=$? dev=$($GET_RC) rm -f $RC WAN_CONF=$WAN_CONF_DIR/$dev.conf check_file $WAN_CONF || cleanup 1 load_module if [ $? -ne 0 ]; then cleanup 2 fi eval "$IFCONFIG_LIST | grep -w $if_name > /dev/null 2> /dev/null" if [ $? -eq 0 ]; then echo -e "\nInterface $if_name is already up!\n" cleanup 1 fi wanrouter_pre_start; echo "Configuring interface: $if_name" if [ "$WAN_DYN_WANCONFIG" = YES ]; then eval "/usr/sbin/wanconfig_client cmd=start,card=$dev,dev=$if_name" else eval "/usr/sbin/wanconfig -v card $dev dev $if_name up >> $WAN_LOG" fi #Regardles of config try to bring up the interface #Interface up command will fail on its own #if [ $? -ne 0 ]; then # cleanup 1 #fi interface_up $if_name if [ $? -ne 0 ]; then echo -e "\nInterface $if_name start error: ip setup failure!\n" cleanup 1 else echo "Interface $if_name up." fi wanrouter_script start $dev $if_name fi ;; stop) #WANROUTER STOP if [ -z $2 ]; then check_module if [ $? -ne 0 ]; then unload_module remove_cdev echo -e "Router is already stopped !\n" cleanup 1 fi #Check that all wanpipe#.conf file defined in # WAN_DEVICES exist check_config || { unload_module remove_cdev echo -e "No devices running, Unloading Modules" cleanup 1 } if [ "$WAN_DEVICES_REV_STOP_ORDER" = "YES" ]; then tmp_dev_list= for dev in $WAN_DEVICES; do tmp_dev_list="$dev ""$tmp_dev_list" done WAN_DEVICES=$tmp_dev_list fi wanrouter_script stop unconfig_interfaces $WAN_DEVICES unconfig_devices $WAN_DEVICES elif [ -z $3 ]; then #WANROUTER STOP WANPIPE dev=$2 if [ "$dev" = "all" ]; then stop_running_wanpipes cleanup 0 fi if [ "$dev" = "force" ]; then check_module if [ $? -ne 0 ]; then unload_module echo -e "Router is already stopped !\n"; cleanup 1; fi wanif_list_shutdown=`grep w $ROUTER_PROC/interfaces | cut -d' ' -f1 | sort -r` if [ ! -z "$wanif_list_shutdown" ] then echo -e "Interfaces to shutdown: \n$wanif_list_shutdown\n" for ifshutdown in $wanif_list_shutdown do ifconfig $ifshutdown down if [ $? -ne 0 ] then echo -ne "failed to shutdown iface $ifshutdown, trying to continue ..." fi done fi wancard_list_shutdown=`cat $ROUTER_PROC/status | cut -d' ' -f1 | grep wanpipe | sort -r` for cardshutdown in $wancard_list_shutdown do wanconfig card $cardshutdown stop done FLAG_UNLOAD_NO_CHECK="YES" unload_module cleanup 0 fi check_config_opt $dev 1 ft1_or_wanpipe=$? dev=$($GET_RC) rm -f $RC #Check that modules are up and running check_module if [ $? -ne 0 ]; then unload_module echo -e "Router is already stopped !\n"; cleanup 1; fi #If we are stopping FT1 driver, we have to check #whether the actual wanpipe# device is running or #not, thus name dev has to be changed to 'wanpipe#' if [ $ft1_or_wanpipe -gt 0 ]; then dev="wanpipe$ft1_or_wanpipe" fi if [ $ft1_or_wanpipe -eq 0 ]; then unconfig_interfaces $dev fi unconfig_devices $dev [ -f $WAN_CONF_DIR/$FT1_CONF ] && rm -f $WAN_CONF_DIR/$FT1_CONF else if [ $OSYSTEM != "Linux" ]; then echo " This option doesn't supported yet!" cleanup 0 fi dev=$2 if_name=$3 #Parse the dev name, and if it starts with #ft1 than it means we should load the ft1 #driver. check_config_opt $dev 0 ft1_or_wanpipe=$? dev=$($GET_RC) rm -f $RC WAN_CONF=$WAN_CONF_DIR/$dev.conf check_file $WAN_CONF || cleanup 1 wanrouter_script stop $dev $if_name eval "$IFCONFIG_LIST | grep -w $if_name > /dev/null 2> /dev/null" if [ $? -eq 0 ]; then echo "Interface $if_name down" eval "ifconfig $if_name down" fi echo "Unconfiguring interface: $if_name" if [ "$WAN_DYN_WANCONFIG" = YES ]; then eval "/usr/sbin/wanconfig_client cmd=stop,card=$dev,dev=$if_name" else eval "/usr/sbin/wanconfig -v card $dev dev $if_name down >> $WAN_LOG" fi if [ $? -ne 0 ]; then cleanup 1 fi check_and_print_still_running && cleanup 0 cd $WAN_HOME echo -e "No devices running, Unloading Modules" unload_module fi ;; start_dev) if [ -z $2 ]; then # WANROUTER START_DEV check_config || cleanup 1 load_module if [ $? -ne 0 ]; then cleanup 2 fi config_devices $WAN_DEVICES elif [ -z $3 ]; then #ROUTER START_DEV WANPIPE dev=$2 load_module if [ $? -ne 0 ]; then cleanup 2 fi config_devices $dev if [ $? -ne 0 ]; then cleanup 3 fi fi ;; stop_dev) if [ -z $2 ]; then #WANROUTER STOP_DEV check_module if [ $? -ne 0 ]; then unload_module remove_cdev echo -e "Router is already stopped !\n" cleanup 1 fi #Check that all wanpipe#.conf file defined in # WAN_DEVICES exist check_config || { unload_module remove_cdev echo -e "No devices running, Unloading Modules" cleanup 1 } if [ "$WAN_DEVICES_REV_STOP_ORDER" = "YES" ]; then tmp_dev_list= for dev in $WAN_DEVICES; do tmp_dev_list="$dev ""$tmp_dev_list" done WAN_DEVICES=$tmp_dev_list fi unconfig_devices $WAN_DEVICES elif [ -z $3 ]; then #WANROUTER STOP_DEV WANPIPE dev=$2 if [ "$dev" = "all" ]; then stop_running_wanpipes cleanup 0 fi #Check that modules are up and running check_module if [ $? -ne 0 ]; then unload_module echo -e "Router is already stopped !\n"; cleanup 1; fi unconfig_devices $dev fi ;; start_ip) if [ -z $2 ]; then # WANROUTER START_IP check_config || cleanup 1 config_interfaces $WAN_DEVICES wanrouter_script start elif [ -z $3 ]; then #ROUTER START_IP WANPIPE config_interfaces $2 fi ;; stop_ip) if [ -z $2 ]; then #WANROUTER STOP_IP unconfig_interfaces $WAN_DEVICES elif [ -z $3 ]; then #WANROUTER STOP_IP WANPIPE unconfig_interfaces $2 fi ;; script) #Debug Statement, used to test the script option #echo "WAN_ACTION=$WAN_ACTION WAN_DEVICE=$WAN_DEVICE WAN_INTERFACE=$WAN_INTERFACE" >> /var/log/messages #wanrouter script if [ ! -z $WAN_ACTION ]; then if [ ! -z $WAN_INTERFACE ]; then wanrouter_script $WAN_ACTION $WAN_DEVICE $WAN_INTERFACE elif [ ! -z $WAN_DEVICE ]; then wanrouter_script $WAN_ACTION $WAN_DEVICE else wanrouter_script $WAN_ACTION fi fi ;; list) check_module if [ $? -ne 0 ]; then echo -e "Router is stopped !\n"; cleanup 0; fi print_active_devices 1; cleanup 0; ;; restart) eval "rm -f $WAN_PROG_LOCK 2> /dev/null > /dev/null" if [ "$2" = "" ]; then $0 stop; $0 start; elif [ "$3" = "" ]; then $0 stop $2; $0 start $2; else $0 stop $2 $3; $0 start $2 $3; fi cleanup 0; ;; restart_dev) eval "rm -f $WAN_PROG_LOCK 2> /dev/null > /dev/null" if [ "$2" = "" ]; then $0 stop_dev; $0 start_dev; elif [ "$3" = "" ]; then $0 stop_dev $2; $0 start_dev $2; fi cleanup 0; ;; restart_ip) eval "rm -f $WAN_PROG_LOCK 2> /dev/null > /dev/null" if [ "$2" = "" ]; then $0 stop_ip; $0 start_ip; elif [ "$3" = "" ]; then $0 stop_ip $2; $0 start_ip $2; fi cleanup 0; ;; modules) if [ $OSYSTEM = "Linux" ]; then cat /proc/modules | grep wan; else $MODULE_STAT | grep -i "wan\|sdla"; #$MODULE_STAT | grep sdla; fi cleanup 0; ;; status) check_module if [ $? -ne 0 ]; then echo -e "Router is stopped !\n"; cleanup 0; fi print_active_devices 1; print_wanpipe_config print_wanrouter_status echo "" cleanup 0; ;; summary) print_config_summary; cleanup 0; ;; hwprobe) load_module silent if [ $? -ne 0 ]; then cleanup 1 fi if [ "$2" = "verbose" ]; then if [ $OSYSTEM = "Linux" ]; then cat /proc/net/wanrouter/hwprobe_verbose else wanconfig hwprobe verbose fi elif [ "$2" = "dump" ]; then if [ $OSYSTEM = "Linux" ]; then cat /proc/net/wanrouter/hwprobe_dump else wanconfig hwprobe verbose fi elif [ "$2" = "legacy" ]; then if [ $OSYSTEM = "Linux" ]; then cat /proc/net/wanrouter/hwprobe_legacy else wanconfig hwprobe legacy fi else if [ $OSYSTEM = "Linux" ]; then cat /proc/net/wanrouter/hwprobe else wanconfig hwprobe fi fi echo cleanup 0; ;; debug) if [ -z $2 ]; then wanrouter_debug; else wanrouter_if_debug $2; fi cleanup 0; ;; parity) pci_parity_ctrl $2 ;; wanrc) config_wanrouter_rc cleanup 0; ;; messages) echo echo "Start WANPIPE /var/log/messages" echo if [ $OSYSTEM = "Linux" ]; then eval "tail -n 200 /var/log/messages | grep -i \"[wanpipe|sdladrv]\" " else eval "tail -n 200 /var/log/messages | grep -i \"wanpipe\|sdladrv\" " fi echo echo "End of WANPIPE /var/log/messages" echo cleanup 0; ;; conflog) echo echo "Start WANPIPE $WAN_LOG" echo eval "cat $WAN_LOG" echo echo "End of WANPIPE $WAN_LOG" echo cleanup 0; ;; version) echo "WANPIPE Release: $ROUTER_VERSION" ;; lineprobe) if [ $OSYSTEM != "Linux" ]; then echo -e "The 'lineprobe' option supported on Linux OS only.\n" cleanup 1; fi echo -e "Starting the lineprobe ...\n" #The lineprobe calls wanrouter internally. #This instance of wanrouter will prevent the other from starting. #Remove the lock. eval "rm -f $WAN_PROG_LOCK 2> /dev/null > /dev/null" #Remove name of the program from command line. shift 1 #Pass rest of the arguments to lineprobe. if [ -e $LINEPROBE_PATH ]; then eval "lineprobe" "$@" else echo -e "File $LINEPROBE_PATH does not exist!" echo -e "Please check 'lineprobe' was successfully compiled.\n" fi ;; *) echo -e "\nWANPIPE: WAN Router startup script\n" echo -e "Usage: $SCRIPT: {options} \n" echo -e " wanrouter start : Starts all devices specified in" echo -e " $WAN_CONF_DIR/wanrouter.rc WAN_DEVICES\n" echo -e " wanrouter stop : Stops all devices specified in" echo -e " $WAN_CONF_DIR/wanrouter.rc WAN_DEVICES\n" echo -e " wanrouter start wanpipe# : Start a single device\n" echo -e " wanrouter stop wanpipe# : Stops a single device" echo -e " (# can range from 1 to 16)\n" if [ $OSYSTEM = "Linux" ]; then echo -e " wanrouter start wanpipe# if_name : Start a single interface on device\n" echo -e " wanrouter stop wanpipe# if_name : Stops a single interface on device" echo -e " (# can range from 1 to 16)\n" fi echo -e " wanrouter restart : Restart all devices specified in" echo -e " $WAN_CONF_DIR/wanrouter.rc WAN_DEVICES\n" echo -e " wanrouter restart wanpipe# : Restart a single device" echo -e " (# can range from 1 to 16)\n" echo if [ $OSYSTEM = "Linux" ]; then echo -e " wanrouter restart wanpipe# if_name : Restart a single interface on device" echo -e " (# can range from 1 to 16)\n" echo fi echo -e " wanrouter list : List all active devices\n" echo -e " wanrouter modules : Show wanpipe kernel modules\n" echo -e " wanrouter status : Display status for all active devices\n" echo -e " wanrouter summary : Summary of config files in $WAN_HOME\n" echo -e " wanrouter hwprobe : Display wanpipe hardware probe info.\n" echo -e " wanrouter debug : Check current wanpipe environment." echo -e " After a startup error run this command to" echo -e " get a possible solution" echo -e " i.e. wanrouter start; wanrouter debug;\n" if [ $OSYSTEM = "Linux" ]; then echo -e " wanrouter debug if_name : Display common debugging statistics" echo -e " In case of line problems save to file," echo -e " wait 2-5mi and send to Sangoma Tech Support" echo -e " i.e. wanrouter debug wp1fr16 > debug_file;\n" fi echo -e " wanrouter messages : Display wanpipe kernel event messages" echo -e " i.e. /var/log/messages\n" echo -e " wanrouter conflog : Display wanpipe configuration parsing messages" echo -e " i.e. $WAN_LOG\n" echo -e " wanrouter wanrc : Configure the wanpipe boot startup order" echo -e " in $META_CONF\n" echo -e " wanrouter version : wanpipe version information.\n" if [ $OSYSTEM = "Linux" ]; then echo -e " wanrouter lineprobe [-c wanpipe#] [options] " echo -e " : Monitor/Debug a line connected to an" echo -e " automatically detected or preconfigured card." echo -e " i.e.: wanrouter lineprobe; or" echo -e " : wanrouter lineprobe -c wanpipe1;" echo -e " Type 'wanrouter lineprobe -help' to get the" echo -e " list of 'lineprobe' options." fi cleanup 0 ;; esac echo cleanup 0 exit 0