Dialogic Media Gateway Release Notes

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION OR ITS SUBSIDIARIES (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, lifesaving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice.

Dialogic is a registered trademark of Dialogic Corporation. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement.

Microsoft is a registered trademark in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country.

SU9 and SU9V34 Release Information
November 20, 2012

The latest software update contains two releases, SU9 and SU9V34.   For all DMG1xxx models, SU9 is supported.  SU9V34 is not supported on DMG1xxx models.  For DMG2xxx models, SU9 and SU9V34 are supported for specific DMG models as found in the following table.

DMG2xxx Supported Configurations:

SW
Release

DSP
Software

Fax
codec

DMG2030

DTI

DMG2060

DTIx

DMG2060

DTISQV34

DMG2120

DTIx

SU9

MR17_7

V.17

Supported

Supported

Not
Supported

Supported


SU9V34


MR21_7

V.17

Supported

Not
Supported

Supported

Not
Supported

V.34

Supported

Not
Supported

Supported

Not
Supported


SU9V34 provides support for V.17 and V.34, bug fixes, feature updates and is supported on DMG2030DTI and DMG2060DTISQV34.  SU9 supports V.17 only, contains bug fixes, and feature updates.  SU9 is supported on DMG2030DTI, DMG2060DTIx, and DMG2120DTIx.  Both the SU9V34 and SU9 releases are supported for the DMG2030DTI, but SU9V34 is recommended as it provides all of the same functionality plus the additional V.34 support.

Details for software updates for each release are found below.

Regarding DMG2xxx SU9V34 V.34 fax testing, the following is recommended:

·         When testing with SR140, use SR140 SDK 6.5.6 or higher. 

·         When testing with SR140, disable the SR140's CED tone generation T.38 parameter.

·         When using T1 CAS configuration, use a rate such as 26.4 kbps or lower.  Higher rates may result in fax session failures due to robbed bit signaling.

 

Release 6.0 SU9 V34
November 20, 2012

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTISQV34  (T1E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU9.0.005.app

Gateway Application

|6.0.SU9.0.005|

T1E1_MR21_7.msd

DSP Firmware

|T1E1_MR21_7|

t1e1_6.0.SU9.0.005.fsh

Main CPU Boot

|6.0.SU9.0.005|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

6123

DMG2030DTI,

DMG2060DTISQV34

Add V.34 fax support..


Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00075978

DMG2030DTI,

DMG2060DTISQV34

Added support to allow setting the maximum TDM drop out time that the FAX modem will try to bridge.  If the FAX signal being received on the TDM line stops, the FAX modem will wait the specified time before determining a loss of signal.  If the FAX signal resumes prior to the timeout, the FAX modem will not hang up.

The SU9V34 release also contains all of the SU9 bug fixes and features detailed below.

Release 6.0 SU9

November 20, 2012

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI , DMG2120DTI (T1/E1), DMG2060DTIS , DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU9.0.005.app

Gateway Application

|6.0.SU9.0.005|

T1E1_MR17_7.msd

DSP Firmware

|T1E1_MR17_7|

t1e1_6.0.SU9.0.005.fsh

Main CPU Boot

|6.0.SU9.0.005|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.SU9.0.005.app

Gateway Application

|6.0.SU9.0.005|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.SU9.0.005.fsh

Main CPU Boot

|6.0.SU9.0.005|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.SU9.0.005.app

Gateway Application

|6.0.SU9.0.005|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU9.0.005.fsh

Main CPU Boot

|6.0.SU9.0.005|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.SU9.0.005.app

Gateway Application

|6.0.SU9.0.005|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU9.0.005.fsh

Main CPU Boot

|6.0.SU9.0.005|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.SU9.0.005.app

Gateway Application

|6.0.SU9.0.005|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim702.iap

Telephony Interface Application

7.02

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim71.ibt

Telephony Interface Boot

7.1

ami_6.0.SU9.0.005.fsh

Main CPU Boot

|6.0.SU9.0.005|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

6178

ALL

Added support for RFC3725 in support of Third Party Call Control (3pcc) systems used to connect two SIP endpoints.

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00075865

DMG1008DNI

The Gateway reset causes a PBX to shut down.

IPY00075898

DMG2xxxDTIx

The Gateway has been updated to send optional T.38 descriptors to match the ones received. 

IPY00075899

DMG2xxxDTIx

The Gateway is unable to parse a comma-separated PAI (P-Asserted Identity) header.

IPY00075941

ALL

The Gateway has been updated to disable the sending of PRACK when 100rel is disabled.

IPY00075629

DMG2xxxDTIx

The Gateway has been updated to handle properly ATA-ATA-OCS blind transfer.

IPY00075852

DMG2xxxDTIx

The Gateway fails IP-to-TDM calls due to CHANNEL INDICATOR in received ISDN messages.

IPY00075900

ALL

The Gateway should use the same SIP call-id and increment CSEQ value after a 401/407 authentication challenge is received.

IPY00075947

ALL

The Gateway has been updated to properly process RE-INVITE no SDP after a call on hold is un-held.

IPY00075950

ALL

The Gateway sometimes fails to process a re-INVITE due to timing issues.

IPY00075951

DMG2xxxDTIx

The Gateway crashes/restarts due to an ISDN buffer leak.

 

Release 6.0 SU8

September 2, 2011

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU8.0.003.app

Gateway Application

|6.0.SU8.0.003|

T1E1_MR17_7.msd

DSP Firmware

|T1E1_MR17_7|

t1e1_6.0.SU8.0.003.fsh

Main CPU Boot

|6.0.SU8.0.003|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.SU8.0.003.app

Gateway Application

|6.0.SU8.0.003|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.SU8.0.003.fsh

Main CPU Boot

|6.0.SU8.0.003|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.SU8.0.003.app

Gateway Application

|6.0.SU8.0.003|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU8.0.003.fsh

Main CPU Boot

|6.0.SU8.0.003|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.SU8.0.003.app

Gateway Application

|6.0.SU8.0.003|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU8.0.003.fsh

Main CPU Boot

|6.0.SU8.0.003|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.SU8.0.003.app

Gateway Application

|6.0.SU8.0.003|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.SU8.0.003.fsh

Main CPU Boot

|6.0.SU8.0.003|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

5598

ALL

Added support for User to User Information.

5688

DMG2xxxDTIx

Added support for ISDN ↔ SIP User to User Information.

5703

ALL

Add support for Information Element (IE) in the SIP INVITEs MIME body.

5850

DMG2xxxDTIx

Added the ability to separate the Network/Terminal configuration from the Transmit Clock configuration.

5907

DMG2xxxDTIx

Added support for Multiple Progress Indicators

5934

ALL

Added the ability to disable the serial port.

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00075648

ALL

Memory Usage Alarms will be generated after an extensive number of TDM →SIP calls.

IPY00075658

DMG2xxxDTIx

A call will be disconnected when a cause code indicating a call is queued (A3) is received.

IPY00075614

DMG1008DNI

A Gateway port will occasionally get stuck in a ring no answer state when a TDM call quickly disconnects.

IPY00075662

DMG2xxxDTIx

The Gateway does not support multiple diversion headers for NI-2.

IPY00075672

DMG100xLS

On a consult transfer on the Gateway to a BUSY extension, a 404 is returned when a 486 is expected.

IPY00075667

DMG2xxxDTIx

PBX names in the web user interface have been clarified for Optiset300E and Optiset300ECS.

IPY00075676

DMG2xxxDTIx

Adept is not parsing some displays correctly.

IPY00075674

DMG2xxxDTIx

The Gateway passes “User Number Allowed, Not Screened” when a call goes through Verizon 411. “User Number Allowed, Passed Networked Screening” is expected.

IPY00075293

DMG1008DNI

MWIs are not working with the latest Siemens HiCom 300 PBX software.

IPY00075675

DMG2xxxDTIx

Support for Progress Indication does not exist when an ISDN PROCEEDING message is received.

IPY00075683

DMG1xxx

SIP traffic always use zero for TOS/DiffServ.

IPY00075691

DMG2xxxDTIx

User Agent Header is not configurable.

IPY00075679

DMG2xxxDTIx

The Gateway sends calls to the fax server as ANONYMOUS even if the called id is provided.

IPY00075651

DMG1008DNI

CPID updates are not detected correctly and calls going to a voicemail system are getting dropped.

IPY00075689

DMG2xxxDTIx

Incoming international calls are not matched on Type of Number.

IPY00075692

DMG2xxxDTIx

The default for Fax Carrier Detection Threshold is changed from -33dB to -43 dB.

IPY00075463

DMG2xxxDTIx

SIP messages are corrupt with data from stdout.

IPY00075694

DMG2xxxDTIx

The second transfer from a Lync Client fails.

IPY00075688

ALL

A REGISTER message with a response of 200OK does not contain a Contact Header.

IPY00075697

DMG2xxxDTIx

On T1CAS the Gateway restarts during a T.38 INVITE causing some calls not to connect.

IPY00075739

DMG1xxx

Audio is not connected to the TDM user. The user continues to hear ringback even after the call is connected.

IPY00075761

DMG2xxxDTIx

A call using singe number fax will be rerouted with the CALLING party as the REDIRECT rather than the CALLED party.

IPY00075753

DMG2xxxDTIx

The online help does not accurately describe the triggers for alternate routing for all call flows.

IPY00075772

DMG2xxxDTIx

Configuration of the WinkStart Timer was not accurate.

IPY00075787

DMG2xxxDTIx

On T1 CAS the user intermittently hear ringback and no voice on a connected call.

IPY00075648

ALL

Memory usage alarms are generated unexpectedly on the Gateway.

 

Known Issues:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074278

ALL

In fax pass-through mode, the Gateway does not notify the VoIP endpoint that it has switched from an LBR codec to G.711.

IPY00074405

DMG2xxxDTIx

After rebooting certain E1 PBX switches, the E1 span does not recover until the Gateway is rebooted.

IPY00074752

ALL

The "countryName" parameter associated with CA Signed Certificates can only be two characters long.

IPY00074879

ALL

When a "&" is contained in the subject field, the Gateway generates a Data_ReadXmlIntoVars() error.

IPY00074997

ALL

The Gateway does not carry the authentication state across renegotiation requisition.

IPY00075156

DMG100xLS

Serial MWIs do not work for NEC 2000 IPS.

IPY00075620

DMG2xxxDTIx

For an ISDN→SIP call, the ISDN connection is dropped after four rings even if nobody has answered the SIP endpoint.

IPY00075614

DMG1008DNI

If a TDM call on the Gateway terminates quickly, the Gateway port does not clean up properly and will not handle subsequent calls properly.

IPY00075777

DMG2xxxDTIx

The Gateway generates a D Channel Pending warning and needs to be rebooted to recover.

IPY00075695

DMG1xxx

Call goes connected but audio fails to start on one port of the Gateway.

IPY00075794

ALL

The Gateway can get stuck in an infinite retry loop if both Load Balancing and Fault Tolerance enabled.

IPY00075795

DMG2xxxDTIx

When multiple OPTIONs pings are sent from the Gateway, on occasion the Gateway does not handle the responses correctly and may make a device unavailable for a short period of time.

IPY00075644

DMG2xxxDTIx

Actual maximum number of SIP↔SIP, G.722→G.711 transcoding calls is 16 calls. If Gateway receives more than 16 simultaneous, DSP Alarms (0x15) will be generated and the channels may not free up.  

Release 6.0 SU7

November 17, 2010

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI  (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU7.0.004.app

Gateway Application

|6.0.SU7.0.004|

T1E1_MR17_7.msd

DSP Firmware

|T1E1_MR17_7|

t1e1_6.0.SU7.0.004.fsh

Main CPU Boot

|6.0.SU7.0.004|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.SU7.0.004.app

Gateway Application

|6.0.SU7.0.004|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.SU7.0.004.fsh

Main CPU Boot

|6.0.SU7.0.004|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.SU7.0.004.app

Gateway Application

|6.0.SU7.0.004|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU7.0.004.fsh

Main CPU Boot

|6.0.SU7.0.004|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.SU7.0.004.app

Gateway Application

|6.0.SU7.0.004|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU7.0.004.fsh

Main CPU Boot

|6.0.SU7.0.004|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.SU7.0.004.app

Gateway Application

|6.0.SU7.0.004|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.SU7.0.004.fsh

Main CPU Boot

|6.0.SU7.0.004|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

5492

DMG2xxxDTIx

Added support for parsing proprietary information for redirect number for the Avaya MSI integration.

5304

ALL

Added support for Multi-Part MIME SIP Messages.

5271

DMG2xxxDTIx

Added support for Calling Line Identification.

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00075358

ALL

A blind transfer is completed on an ALERTing message and should be completed on a CONNECTed message.

IPY00075458

ALL

If an INVITE is sent without SDP, then audio is never transmitted on the call.

IPY00075461

DMG2xxxDTIx

SIP→SIP T.38 calls using tel event payload 101 no longer work after upgrading a Gateway to 6.0 SU6.

IPY00075453

ALL

In some cases in the contact header the remote phone number was used to build the URI instead of the local phone number.

IPY00075446

DMG2xxxDTIx

The use of Octet 3.1 is not allowed for QSIG.
NOTE: the QSIG ECMA 143 Specification states that the Octet 3.1 should never be set, the Gateway validation has been relaxed to accommodate this PBX.

IPY00075482

DMG1008DNI

Call are not being answered on a transfer because of delayed lamp updates from the PBX.

IPY00075429

DMG2xxxDTIx

Voice gets distorted when a hold/unhold is done.

IPY00075507

ALL

Outbound calls to certain mobile network providers fail.

IPY00075492

ALL

Aborting a transfer tears down all calls on the transfer.

IPY00075367

ALL

The Gateway does not parse the CPID information correctly if there is a "9" in the CPID.

IPY00075536

ALL

A software fault may occur on the Gateway when a message is received by the Gateway that is not associated with an existing dialog.

IPY00075503

DMG2xxxDTIx

Intermittently on TDM bridged calls the called party cannot hear the caller.

IPY00075445

DMG2xxxDTIx

The Gateway reports a failure for MWI Clear/Set TDM test on a Tadiran Coral IPX Office with T1-QSIG even though the test actually passes.

IPY00075566

DMG2xxxDTIx

A conference call from a soft IP client to a PSTN phone times out prematurely.

IPY00075552

DMG2xxxDTIx

The Gateway disconnects an ISDN→OCS call during ongoing communication.

IPY00075460

DMG2xxxDTIx

The Gateway does not disconnect on a FACILITY message when connected to an external PSTN call on an Alcatel OmniPCX PBX.

IPY00074573

DMG2xxxDTIx

The Gateway generates an unexpected "Error _isdnLiFreeTdmChannel(10) already free" error message.

IPY00075575

DMG2xxxDTIx

The Gateway fails to parse re-direct information in the SETUP message it receives from a Nortel CS1000-NI2.

IPY00075576

DMG2xxxDTIx

The Gateway fails to parse re-direct information from a SETUP message it receives from DMS100 protocol.

IPY00075545

DMG2xxxDTIx

The Gateway does not send RTPEvent(Start) to SIPEnd point when sending DTMF via RFC2833.

IPY00075425

DMG2xxxDTIx

RFC2833 DTMF is not passed to the second leg of a SIP→SIP transcoded call.

IPY00075569

DMG2xxxDTIx

When switching to T.38 mode in the Gateway the packet time is not cleared or validated and the last existing packet time is used.

IPY00075582

ALL

The value for max ptime is being misinterpreted as ptime.

IPY00075487

ALL

The Gateway is not using the redirect information from an inbound SIP call.

IPY00075599

DMG2xxxDTIx

The gateway may fail to respond to an unhold re-INVITE.

Release 6.0 SU6

July 20, 2010

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI  (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU6.0.004.app

Gateway Application

|6.0.SU6.0.004|

T1E1_MR17_6.msd

DSP Firmware

|T1E1_MR17_6|

t1e1_6.0.SU6.0.004.fsh

Main CPU Boot

|6.0.SU6.0.004|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.SU6.0.004.app

Gateway Application

|6.0.SU6.0.004|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.SU6.0.004.fsh

Main CPU Boot

|6.0.SU6.0.004|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.SU6.0.004.app

Gateway Application

|6.0.SU6.0.004|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU6.0.004.fsh

Main CPU Boot

|6.0.SU6.0.004|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.SU6.0.004.app

Gateway Application

|6.0.SU6.0.004|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU6.0.004.fsh

Main CPU Boot

|6.0.SU6.0.004|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.SU6.0.004.app

Gateway Application

|6.0.SU6.0.004|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.SU6.0.004.fsh

Main CPU Boot

|6.0.SU6.0.004|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

5129

DMG2xxxDTIx

Added support for the Gateway to handle digits sent from switches that use overlapped sending for sending digits.

5110

DMG1xxx

Added support to the DMG1xxx to allow SRTP with 20 ms calls. An 8 port Gateway will be limited to 4 ports when these options are selected.

4033

ALL

Added support for the Gateway to detect and route fax calls to a single number.

5109

ALL

Increased the maximum number of available VoIP Host Groups from 10 to 120.

5278

DMG2xxxDTIx

Included ISDN Progress Indication and Cause Code information in a 183 SIP message.

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074995

ALL

If a BYE message is sent to the transfer target in the middle of a supervised transfer, subsequent calls will receive an "Error mediaSessionStart() failed -11" message.

IPY00075103

ALL

For TDM→TDM calls in front of the PBX, a STATUS message is sent to the PBX if a NOTIFY is sent to the Gateway during a call which causes the call to drop.

IPY00075133

ALL

Calls through the Gateway are not integrated correctly on some occasions.

IPY00075088

DMG2xxxDTIx

A VoIP→VoIP transfer fails with reason "Service Unavailable".

IPY00075056

DMG2xxxDTIx

Ports on a T1 CAS integration do not free up if the next call comes in too quickly after the previous call disconnects.

IPY00075131

ALL

The Gateway is not able to strip a prefix for an international call (011) and send the call out with call type information of international.

IPY00075152

ALL

DNS lookup on the Gateway does not support CNAME.

IPY00075147

ALL

When a change is made at the end of the CPID table and the config.ini file is exported, an extra space is present and the config.ini cannot be imported.

IPY00074727

ALL

The Gateway does not support the use of a ">" sign in a name of a route rule.

IPY00075201

ALL

An unexpected CLeg Not Found alarm is generated.

IPY00075122

DMG2xxxDTIx

The Gateway's state remains off hook when a timeout occurs waiting for a WINK.

IPY00075187

ALL

The Gateway is not able to parse an INVITE with a tel tag in the request URI field: INVITE tel:+XXXX.

IPY00075196

ALL

Echo cancellation parameters are not available through the web interface.

IPY00074969

ALL

Payload type for outbound calls is not configurable.

IPY00075205

ALL

The Gateway generates a "Transaction Not Found" alarm when it receives a "302 Moved Temporarily" and the TDM disconnects.

IPY00075211

ALL

The Gateway is replacing "#" with "%23".

IPY00075264

ALL

Supervised transfer call fails when the INVITE contains a Transfer-From header.

IPY00075295

ALL

The Gateway is not playing A, B, C, or D DTMF within a SIP INFO message.

IPY00075264

DMG1008DNI

The Gateway unexpectedly disconnects the primary call on a supervised transfer.

IPY00075334

ALL

In some situations, MWIs would fail and generate "Command MWI Timed Out: Success" error.

IPY00075335

ALL

B-Channel assignment fails when DMG is in Network Mode.

IPY00075279

ALL

The Gateway sends the ISDN Redirect number in the SIP header 'Diversion' field.

IPY00075279

ALL

Formatting of the ISDN Redirect number in the SIP header causes SR140 to not pick up the redirect number.

 

Known Issues:

Defect #

Dialogic® Media Gateway Model

Description

IPY00075429

DMG2xxxDTIx

After the re-INVITE for an un-hold, there is no voice or garbled voice between the two endpoints.

IPY00074278

ALL

In fax pass-through mode, the Gateway does not notify the VoIP endpoint that it has switched from an LBR codec to G.711.

IPY00074405

DMG2xxxDTIx

After rebooting certain E1 PBX switches, the E1 span does not recover until the Gateway is rebooted.

IPY00075425

DMG2xxxDTIx

DTMF is not correctly passed to the second leg of the call when transcoding is required.

IPY00074257

ALL

All SIP messages are parsed even if it flagged as truncated.

IPY00074611

ALL

An INTERNAL ERROR is generated when an INFO message and a REFER message are received simultaneously.

IPY00074687

DMG2xxxDTIx

The Gateway experiences a software fault and restarts.

IPY00075445

DMG2xxxDTIx

The Gateway reports "Device Not Available" even though the MWI light changes states when connected to a Tadiran Coral IPx Office via T1-QSIG.

IPY00074752

ALL

The "countryName" parameter associated with CA Signed Certificates can only be two characters long.

IPY00074879

ALL

When a "&" is contained in the subject field, the Gateway generates a Data_ReadXmlIntoVars() error.

IPY00075367

DMG100xLS

CPID is not parsed correctly when using the rule "9\d(2-10).

IPY00075293

DMG1008DNI

The Gateway is not dialing the extension after an FAC for an MWI request.

IPY00074997

ALL

The Gateway does not carry the authentication state across renegotiation requisition.

IPY00075358

DMG2xxxDTIx

The Gateway is completing a transfer before the complete is expected.

IPY00075156

DMG100xLS

Serial MWIs do not work for NEC 2000 IPS.

 

Release 6.0 SU5

February 22, 2010

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI  (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU5.0.009.app

Gateway Application

|6.0.SU5.0.009|

T1E1_MR17_5.msd

DSP Firmware

|T1E1_MR17_5|

t1e1_6.0.SU5.0.009.fsh

Main CPU Boot

|6.0.SU5.0.009|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.SU5.0.009.app

Gateway Application

|6.0.SU5.0.009|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.SU5.0.009.fsh

Main CPU Boot

|6.0.SU5.0.009|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.SU5.0.009.app

Gateway Application

|6.0.SU5.0.009|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU5.0.009.fsh

Main CPU Boot

|6.0.SU5.0.009|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.SU5.0.009.app

Gateway Application

|6.0.SU5.0.009|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU5.0.009.fsh

Main CPU Boot

|6.0.SU5.0.009|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.SU5.0.009.app

Gateway Application

|6.0.SU5.0.009|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.SU5.0.009.fsh

Main CPU Boot

|6.0.SU5.0.009|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

3230

ALL

Added support to allow calls with different codecs to go through the Gateway simultaneously.

3257

DMG2xxxDTIx

Added support to transcode calls with different codecs.

5222

DMG2xxxDTIx

Added support for ISDN and Analog modem calls.

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074631

ALL

When a routing rule is dragged too quickly through the routing table, it will not drop in the expected location.

IPY00074632

ALL

An INVITE message containing a long URI does not return a 414 response.

IPY00074782

ALL

The INVITE message sent by the Gateway contains the transport parameter in the contact header but does not bind it to the URI.

IPY00074831

ALL

The Gateway transmits a zero for an RTP port number for a HOLD re-INVITE on a SIP→SIP call.

IPY00074825

DMG2xxxDTIx

The Gateway intermittently fails to get the call party ID from the SMDI link on T1 CAS.

IPY00074887

DMG2xxxDTIx

RED alarm is not debounced per ANSI T1.231.

IPY00074827

DMG100xLS

The Gateway intermittently fails to get the call party ID from the SMDI link on Analog.

IPY00074813

ALL

The Gateway drops calls when inter-networking ISDN progress messages are present.

IPY00074888

DMG2xxxDTIx

A Gateway TDM channel may hang if a second incoming ISDN ALERT message was received.

IPY00074790

DMG2xxxDTIx

The configuration parameter srtpUnEncryptedSRTCP is not available via the web interface.

IPY00074715

DMG1008DNI

Added support for digital answer supervision on Nortel PBXs.

IPY00074876

ALL

Gateway Software Fault - Hardware Watchdog Expiration: Warm Reset was experienced on the Gateway.

IPY00074864

DMG2xxxDTIx

Hook flash transfers that are aborted cause the T1 CAS port to hang.

IPY00074781

DMG2xxxDTIx

The Gateway disconnects a call when a PROG message is received with an unsupported IE.

IPY00074829

DMG2xxxDTIx

For TDM→TDM calls the ISDN call type information is not passed from the inbound call to the outbound call.

IPY00074882

ALL

Some supervised transferred calls will cause the port on the Gateway to no longer take incoming calls.

IPY00074832
IPY00074885

DMG2xxxDTIx

The Gateway is disconnecting CAS when a proprietary distinctive ring feature is enabled on the switch side.

IPY00074902

ALL

Gateway gets into a state where it responds to all Options messages with 503 Service Unavailable.

IPY00074871

ALL

When the Gateway sends a REGISTRATION message, the user id is not included in the contact binding field.

IPY00074624

ALL

Reception of multiple REFER messages for a single call is not supported.

IPY00074828

ALL

For supervised transfer when the first TDM call leg disconnects, the Gateway disconnects the second call leg as well.

IPY00074907

DMG2xxxDTIx

Fax calls fail when the exclusive bit in the Bearer Capabilities IE is not enabled.

IPY00074867

DMG1008DNI

DMG1000 ports are going in and out of service on Nortel.

IPY00074768

ALL

Certain outbound fax calls from the Gateway get rejected with a reason of incompatible destination.

IPY00074909

DMG2xxxDTIx

If an INVITE to the Gateway has no SDP, the call will be connected with no media.

IPY00074757

ALL

Added support for SIP transport change via refer-to header.

IPY00074945

DMG2xxxDTIx

When a P-asserted Identity header is set with user=phone the call is dropped.

IPY00074972

DMG2xxxDTIx

The Gateway does not support inbound ISDN calls with unrestricted digital information bearer capability.

 

Known Issues:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074450

DMG1xxxLS

Gateway does not always disconnect a call when a disconnect tone is received.

IPY00074278

ALL

In fax pass-through mode, the Gateway does not notify the VoIP endpoint that it has switched from an LBR codec to G.711.

IPY00074405

DMG2xxxDTIx

After rebooting certain E1 PBX switches, the E1 span does not recover until the Gateway is rebooted.

IPY00074589

ALL

Gateway call log does not match the number of active channels in the TDM status page.

IPY00074501

ALL

SRTP is allowed to be set up with 20 ms frame size, even if this combination is an invalid setup.

IPY00074257

ALL

All SIP messages are parsed even if it flagged as truncated.

IPY00074611

ALL

An INTERNAL ERROR is generated when an INFO message and a REFER message are received simultaneously.

IPY00074687

DMG2xxxDTIx

The Gateway experiences a software fault and restarts.

IPY00074727

ALL

If a rule label contains a ">" the name will be changed when submitted.

IPY00074752

ALL

The "countryName" parameter associated with CA Signed Certificates can only be two characters long.

IPY00074879

ALL

When a "&" is contained in the subject field, the Gateway generates a Data_ReadXmlIntoVars() error.

IPY00074917

DMG1008DNI

Remote MWIs fail on Nortel M1, when done between more than one Nortel switch.

IPY00074969

DMG2xxxDTIx

The Gateway only supports payload type 101 for DTMF on SIP→SIP calls.

IPY00074997

ALL

The Gateway does not carry the authentication state across renegotiation requisition.

IPY00075031

DMG2xxxDTIx

When a SIP→SIP call is put on hold, it unexpectedly drops after 30 seconds of holding.

IPY00075147

ALL

The Gateway creates a space in front of the start of the routing table tag in the xml file if a change is made to the end of the CPID table.

IPY00075156

DMG100xLS

Serial MWIs do not work for NEC 2000 IPS.

IPY00075180

DMG2xxxDTIx

For TDM«VoIP calls using codec G.722 on the VoIP side, the voice will sound garbled. This will also be the case for VoIP → VoIP calls if only one side is G.722.

 

Release 6.0 SU4

July 30, 2009

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI  (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.SU4.0.012.app

Gateway Application

|6.0.SU4.0.012|

T1E1_MR17_02.msd

DSP Firmware

|T1E1_MR17_02|

t1e1_6.0.SU4.0.012.fsh

Main CPU Boot

|6.0.SU4.0.012|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.SU4.0.012.app

Gateway Application

|6.0.SU4.0.012|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.SU4.0.012.fsh

Main CPU Boot

|6.0.SU4.0.012|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.SU4.0.012.app

Gateway Application

|6.0.SU4.0.012|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU4.0.012.fsh

Main CPU Boot

|6.0.SU4.0.012|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.SU4.0.012.app

Gateway Application

|6.0.SU4.0.012|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.SU4.0.012.fsh

Main CPU Boot

|6.0.SU4.0.012|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.SU4.0.012.app

Gateway Application

|6.0.SU4.0.012|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.SU4.0.012.fsh

Main CPU Boot

|6.0.SU4.0.012|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

3090

ALL

Add support for SIP Registration and Authentication as both the server and the client.

3292
3423

DMG2xxxDTIx

Added the ability to support TCP and UDP calls simultaneously.

3542

ALL

Added support for pre and post feature access codes (FAC) for message waiting indicators (MWI).

3257

DMG2xxxDTIx

Added the ability to support routing calls from one SIP endpoint to another SIP endpoint.

3491

ALL

Added support for ISDN call type for TDM → VoIP calls.

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074265

ALL

TCP Inactivity timer default is too short and will be increased to 90 seconds.

IPY00074511

DMG2xxxDTIx

Path replacement optimization intermittently fails on Avaya PBX.

IPY00074515

DMG1008RLMDNIW

Forward Busy calls fail to integrate on the DMG1008RLMDNIW.

IPY00074536

ALL

A negative number in the learn tone fields generates a non-descript error message.

IPY00074531

DMG1008MTLDNIW

MWIs fail on the DMG1008MTLDNIW when the FAC is specified in the NOTIFY message instead of the Gateway Configuration interface.

IPY00074569

ALL

The Gateway is sending Specific Trap = 0 when Specific Trap = 1 is expected for an enterprise level SNMP alarm.

IPY00074590

ALL

Gateway web interface is not accessible through HTTPS.

IPY00074314

DMG1xxx

The IP → TDM gain setting on the DMG1xxx models does not affect the DTMF levels in that direction.

IPY00074554

ALL

A JavaScript warning is given on startup in MSIE8.0.

IPY00074572

ALL

Gateway generates SIP INFO messages when only the call reason changes.

IPY00074526

ALL

The Gateway incorrectly converts spaces to %20 characters when sending call name information.

IPY00074602

ALL

Payload type 13 (comfort noise) is not accepted when VAD is disabled.

IPY00074519

DMG2xxxDTIx

Routing table only supports 100 entries for Inbound TDM and Inbound VoIP rules.

IPY00074607

DMG2xxxDTIx

TDM Trunk Groups do not support 120 groups.

IPY00074568

ALL

Call ID information is not manipulated for a REFER message received for a transfer.

IPY00043917

ALL

On TDM → VoIP call if the VoIP media session is inactive when the VoIP send a 200OK message, the Gateway never answers the TDM call and never sends an ACK.

IPY00074618

ALL

Faxes are failing from TDM → VoIP because CED tones are not detected.

IPY00074622

ALL

The Gateway is not sending # in the dial string.

IPY00074626

ALL

The SIP TLS server session cache will attempt to cache 20k entries which can cause the web admin pages to load incorrectly or not at all.

IPY00074608

ALL

When the Gateway’s configuration file is downloaded via BootP and TFTP, some of the configuration settings do not take effect.

IPY00074625

ALL

TDM → VoIP calls will go RNA when using TLS.

IPY00074678

DMG2xxxDTIx

The redirecting party information is not in the setup messages for NI2 protocol for VoIP → TDM calls.

 

Known Issues:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074450

DMG1xxxLS

Gateway does not always disconnect a call when a disconnect tone is received.

IPY00074278

ALL

In fax pass-through mode, the Gateway does not notify the VoIP endpoint that it has switched from an LBR codec to G.711.

IPY00074405

DMG2xxxDTIx

After rebooting certain E1 PBX switches, the E1 span does not recover until the Gateway is rebooted.

IPY00074589

ALL

Gateway call log does not match the number of active channels in the TDM status page.

IPY00074501

ALL

SRTP is allowed to be set up with 20 ms frame size, even if this combination is an invalid setup.

IPY00074257

ALL

All SIP messages are parsed even if it flagged as truncated.

IPY00074611

ALL

An INTERNAL ERROR is generated when an INFO message and a REFER message are received simultaneously.

IPY00074617

ALL

When a route rule is dragged through five or more rules to quickly, the drop location is not accurate.

IPY00074620

ALL

When a transfer is done immediately after going off hook, the switch does not register the hook flash and the transfer request is not accepted.

IPY00074624

ALL

Multiple, simultaneous REFER messages are not supported by the Gateway.

IPY00074632

ALL

Long URI addresses within in the INVITE packet cause the Gateway to exception and/or restart.

IPY00074643

ALL

The Gateway does not properly bind the URI parameters when using brackets "<>".

IPY00074686

DMG2120DTIx

The Gateway experiences a software fault "VWSS_STSK" and restarts.

IPY00074687

DMG2xxxDTIx

The Gateway experiences a software fault and restarts.

IPY00074715

DMG1xxxDNI

There is no out of band answer supervision for the DMG1008DNI.

IPY00074727

ALL

If a rule label contains a ">" the name will be changed when submitted.

IPY00074751

ALL

If the PROG message is present, calls using a mediation server will fail when the PBX signals in-band tones availability to the Gateway.

IPY00074768

DMG2xxxDTIx

Some faxes will fail with incompatible destination if the call is sent as a voice call, but the fax endpoint is expecting data or some other non-voice type call.

IPY00074690

DMG2xxxDTIx

When more than 100 routing rules are used, there is an increased amount of time to initially load the web interface page.

 

Release 6.0 SU3.1

May 29, 2009

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI  (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.136.app

Gateway Application

|6.0.136|

T1E1_MR17_02.msd

DSP Firmware

|T1E1_MR17_02|

t1e1_6.0.136.fsh

Main CPU Boot

|6.0.136|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.136.app

Gateway Application

|6.0.136|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.136.fsh

Main CPU Boot

|6.0.136|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.136.app

Gateway Application

|6.0.136|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.136.fsh

Main CPU Boot

|6.0.136|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.136.app

Gateway Application

|6.0.136|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.136.fsh

Main CPU Boot

|6.0.136|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.136.app

Gateway Application

|6.0.136|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.136.fsh

Main CPU Boot

|6.0.136|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074484

DMG2xxxDTIx

Call dropped by the Gateway when the number of digits received is less than the minimum number configured in the Gateway for ISDN Overlapped Receive dialing.

IPY00074442

IPY00074456

DMG1xxx

Gateway will reboot for dial strings that take longer than 10 seconds to dial.

IPY00074443

DMG1xxx

The CNG tone is not rendered correctly to the TDM line after a re-INVITE to a T38 session.

IPY00074446

DMG2xxxDTIx

Nortel Option 11 PBX reports “Calls Barred” for calls from the Gateway when the protocol is DMS100.

IPY00074449

DMG2xxxDTIx

Caller ID is not passed on TDM → IP on certain Avaya PBXs using T1 QSIG.

IPY00074462

ALL

Call integration errors on Toshiba integration when the time sync packet is sent from the switch.

IPY00074485

DMG2xxxDTIx

IP transfer to an external TDM number returns a “488 Not Acceptable Here” message.

IPY00074498

ALL

The INVITE expiration timeout defined by T1 and T2 SIP timers are inaccurate.

IPY00074502

ALL

Added support for SIP display names that are not in quotes.

IPY00074503

ALL

An underscore in the SIP hostname is not supported.

IPY00074508

DMG2xxxDTIx

Ringback tone generation for various countries is not user configurable.

IPY00074300

DMG2xxxDTI

The Enable Failover configuration parameter is available to the user on non-survivability models.

IPY00074516

DMG2xxxDTIx

The Gateway does not generate busy tone when connected via T1 CAS – EM Wink.

IPY00074358

ALL

When the Gateway receives a REFER request for a transfer while in the waiting for CPID state, the transfer fails.

IPY00074230

ALL

The Gateway’s web interface does not respond when too many connections are attempted.

IPY00074506

ALL

Trace messages are sent out the serial port when the Gateway is configured for serial integration.

IPY00074469

ALL

Calls through the Gateway using T.38 fail for a variety of reasons including – the Gateway includes redundant m=image lines in SDP Answer in response to a fax re-INVITE and the Gateway only includes an m=audio line in SDP Answer response to a fax re-INVITE.

IPY00074509

DMG2xxxDTIx

The Gateway does not generate busy tone when connected via T1 CAS – EM Wink.

IPY00074470

IPY00074507

DMG2xxxDTIS

Faxes were not handled using T.38 and a Media session was not starting resulting in faxes failing to transmit.

IPY00074514

ALL

TDM to TDM faxes do not switch to T.38 on occasion.

IPY00074521

DMG2xxxDTIx

TDM to TDM routes have audio delays.

IPY00074538

DMG2xxxDTIx

Inbound TDM calls from PSTN to another TDM device are disconnecting immediately because of a resource leak.

IPY00074537

DMG2xxxDTIx

A large number of Media Session Open Failed alarms are generated.

IPY00074545

ALL

The Gateway does not send the media offer for image when in audio mode causing faxes to fail in some instances.

IPY00074528

DMG2xxxDTIx

The Gateway does not load the ISDN Call Type configuration after a reboot.

IPY00074548

DMG2xxxLS

An alarm is generated for every in-band MWI on analog.

IPY00074550

DMG1xxx

T.38 fails if media session is started with SRTP.

 

 

Release 6.0 SU3

March 5, 2009

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI  (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.128.app

Gateway Application

|6.0.128|

T1E1_MR17_02.msd

DSP Firmware

|T1E1_MR17_02|

t1e1_6.0.128.fsh

Main CPU Boot

|6.0.128|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.128.app

Gateway Application

|6.0.128|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.128.fsh

Main CPU Boot

|6.0.128|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.128.app

Gateway Application

|6.0.128|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.128.fsh

Main CPU Boot

|6.0.128|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.128.app

Gateway Application

|6.0.128|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.128.fsh

Main CPU Boot

|6.0.128|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.128.app

Gateway Application

|6.0.128|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.128.fsh

Main CPU Boot

|6.0.128|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074225

ALL

The Gateway requires a restart after the quick configuration wizard is run even if none of the options are changed.

IPY00074464

ALL

When a call is placed on hold via a media level connection, it will not transition properly to unhold.

IPY00074453

ALL

A memory leak exists if the Gateway receives a response where the local tags do not match the existing dialog.

IPY00074435

ALL

The Gateway does not reliably include the unsupported media lines in the SDP Answer it sends to a VoIP endpoint.

IPY00074399

ALL

Trailing spaces in the VoIP→ General Page → Host and Domain fields cause failures for Gateway to fax, specifically, the re-INVITE from the VoIP endpoint to transition to a fax call.

IPY00074431

DMG2xxxDTIx

The Gateway does not respond to PROGRESS messages with SIP 183 correctly in both TDM→VoIP and VoIP→TDM directions.

IPY00074378

DMG2xxxDTIx

RTP dynamic payload type 127 is not supported.

IPY00074436

ALL

The media level connection information is not stored per stream, so when multiple connections are specified, the last connection will apply to all streams.

IPY00074391

DMS1004LS

Reading registers from the SiLabs chip intermittently gives bad data.

IPY00074289

DMG2xxxDTIx

For TDM to VoIP calls, the call is dropped when a SIP INFO message tag is not matched.

IPY00074219

DMG1008LS

Incorrect parsing of CPID from serial interface with Ericsson MD110 when there are leading spaces in the serial message.

IPY00074422

ALL

The ptime attribute is not being recognized by the Gateway.

IPY00074452

ALL

The Gateway does not include the client authentication key usage for x509 certificates created by the Gateway. The certificate purpose validation will be a configurable option.

IPY00074420

DMG2030DTIQ

The E&M Wink settings are not preserved on an upgrade from 5.1 to 6.0.

IPY00074379

ALL

When an *.ini file in imported to the Gateway, a restart is required regardless of the changes made.

IPY00074451

ALL

When a G723 offer is made to the Gateway while the Gateway is configured for G711, the Gateway would fail to detect unsupported media.

IPY00074428

DMG2xxxDTIx

The Gateway does not include unsupported media lines in the SDP Answer sent to the VoIP endpoint.

IPY00074424

ALL

The “user=phone” parameter is not configurable.

IPY00074417

DMG2xxxDTIx

The Gateway does not recognize when a T1 line is connected when the T1 line is connected after the Gateway is running.

IPY00074434

ALL

The Gateway does not send RTCP packets when the call is placed on hold.

IPY00074432

DMG2xxxDTIx

The Gateway does not respond to ALERTING messages with SIP 180 correctly in both TDM → VoIP and VoIP→TDM directions.

IPY00074315

DMG2xxxDTIx

The debug trace message “TDM Channel not in use – attempting to free a channel that is already free” is generated after a T1 CAS transfer.

IPY00074365

DMG2xxxDTIx

Transfers are failing when the switch does indicate ALERTING via the D-channel on ISDN.

IPY00074362

ALL

The Gateway stops playing ringback tone when an early media session is negotiated.

IPY00074233

ALL

The name field in the routing table will only accept 39 characters.

IPY00074395

DMG1xxxLS

The Gateway does not handle CPID when it is sent before the first ring.

IPY00074403

DMG1008RLM

The Gateway does not process MWI's TDM to IP on Rolm 9751.

IPY00074412

DMG1xxxLS

A comfort noise packet is being sent when VAD is disabled.

IPY00074302

DMG2xxxDTIx

There is no option on the Gateway to choose which diverting leg information to use for ISDN calls.

IPY00074401

ALL

Gateway is sending unsupported media (indicated by setting the port to 0) in SDP offer.

IPY00074375

ALL

Called name is not displayed properly in the call log when the called name string consists of dialable characters.

IPY00074305

ALL

When the Gateway finds a mismatch in the codecs a 415 message is sent as the response instead of a SIP 488.

IPY00074363

ALL

Anonymous calls are not sent with user=phone attribute in the SIP INVITE message.

IPY00074391

DMG1xxxLS

 

 

Release 6.0 SU2

December 22, 2008

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.121.app

Gateway Application

|6.0.121|

T1E1_MR17_02.msd

DSP Firmware

|T1E1_MR17_02|

t1e1_6.0.121.fsh

Main CPU Boot

|6.0.121|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.121.app

Gateway Application

|6.0.121|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.121.fsh

Main CPU Boot

|6.0.121|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.121.app

Gateway Application

|6.0.121|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.121.fsh

Main CPU Boot

|6.0.121|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.121.app

Gateway Application

|6.0.121|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.121.fsh

Main CPU Boot

|6.0.121|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.121.app

Gateway Application

|6.0.121|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.121.fsh

Main CPU Boot

|6.0.121|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

3378

ALL

 Add configuration option of SRTP_Optional, to allow the gateway to process calls to/from endpoints in either secure or non-secure mode.

3245

ALL

Add support to provide calling and called type of number (Default, Unknown, International, National, Network Subscriber, Abbreviated or Reserved)  and calling and called number plan (Default, Unknown, ISDN_E.164, Data_X.121, Telex_F69, Standard, Private, or Reserved) on a per call basis.

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074224

All

The Gateway fails to route calls when there are quotes included in the DN Name.

IPY00043928

DMG2xxxDTIx

When PBX b-channels are taken out of service the telephony page does not reflect the status. This is supported for NI-2, 5ESS and DMS100 only.

IPY00074218

All

The pass-through fax does not work when the gateway is running in A-Law mode.

IPY00074274

DMG2xxxDTIx

On a VoIP to TDM call where the TDM side disconnects during call setup a “Server Timeout” error will be generated on the next call.

IPY00044955

DMG2xxxDTIx

DMG is returning a ''500 INTERNAL SERVER ERROR'' with the Q.931 cause being ''INVALID INFORMATION ELEMENT CONTENTS''.

IPY00074246

DMG2xxxDTIx

IP side connects when DTMF tones are received on the ISDN side before the ISDN call has been connected. This should be configurable.

IPY00074248

DMG2xxxDTIx

Gateway reports a red alarm on T1 interface but does not report when the alarm goes back to green.

IPY00074264

DMG2xxxDTIx

The Gateway is not connecting VoIP to TDM call to a cell phone.

IPY00074267

All

The web interface to the Gateway fails to render the call log page on occasion.

IPY00074221

All

During an MWI load test the gateway raises an alarm for being out of RTP ports.

IPY00074299

DMG2xxxDTIx

T1 QSIG progress message is not parsed correctly.

IPY00074307

DMG2xxxDTIx

When the Gateway is configured for DMS-100, the outgoing SETUP message is missing the display name included in the INVITE.

IPY00074279

DMG2060DTISQ

IP Calls to a cell phone via a PBX are failing to complete.

IPY00074277

DMG2xxxDTIx

After a few weeks the Gateway stops processing calls and must be restarted to recover.

IPY00074321

ALL

Microsoft OCS - user=phone parameter not supported when the destination is a telephone number on TDM-to-IP calls.

IPY00074303

ALL

A blank INFO is not being sent if no CPID is received for TDM to IP calls.

IPY00074249

ALL

Various issues when using FireFox version 2.

IPY00044662

DMG2xxxDTIx

Media start is failing when interoperating with an SBC (CXC from Convergence).

IPY00074330

DMG2xxxDTIx

The return cause code of 127 (0x7F) is not sent to TDM when a SIP 487 response is received from the VoIP endpoint.

IPY00074285

ALL

Calls from TDM to IP do not include the called party number in the INFO message.

IPY00074298

DMG1004LS

The Gateway is not using the port specified by the port tag in the NOTIFY message.

IPY00078366

DMG2xxxDTIx

The terminal Vxworks command “task checkstack” causes a data abort on the DMG2000.

IPY00074327

ALL

VoIP to TDM MWI requests fail if the TDM switch does not provide dialtone.

IPY00074323

ALL

Gateway sends and receives audio even after offer/answer with a=sendonly or a=rcvonly.

IPY00074326

ALL

If neither the NAME nor NUMBER of a URI is known 'anonymous' is not used.

IPY00074304

ALL

IP side connects when DTMF tones are received on the TDM side before the TDM call has been connected for all non-ISDN protocols. This should be configurable.

IPY00074286

DMG2xxxDTIx

TDM to IP calls cause Gateway to reboot when using serial MCI.

IPY00074331

DMG2xxxDTIx

A-law and µ-law codecs indicated in SDP response are not simultaneously supported by the DMG2xxx platform.

IPY00074336

DMG2xxxDTIx

Incoming TDM calls on 4ESS are dropped due to Bearer Capability incompatibilities.

IPY00074340

ALL

The parameter “gwSigDigitRelay” should default to off.

IPY00074211

DMG2xxxDTIx

Error message is not generated when all spans on the Gateway are full and a transfer is attempted.

IPY00074322

DMG2xxxDTIx

Gateway responds with SIP 480 when T1 line is unplugged instead of SIP 503.

IPY00074338

ALL

There is no parameter to allow users to determine if the Gateway should support reliable provisional responses or not.

IPY00074320

ALL

Early Media is not supported for TDM-to-IP calls.

IPY00074297

DMG2xxxDTIx

TIMG resources spike on serial MWI Requests and generate an Error: No free objects.

IPY00074333

ALL

IP call is not placed on hold when the IP address is 0.0.0.0 on a SIP REINVITE.

IPY00074313

DMG2xxxDTIx

Transfers are failing due to “Failed to get outbound route”.

IPY00074355

ALL

Support for the phone=context attribute is not supported. It should be user configurable.

IPY00074345

DMG2xxxDTIx

Unsupervised transfers on T1 CAS with no FAC, take 6 seconds to complete the transfer.

IPY00074384

DMG1xxxLS

The TDM port number is not sent in the INVITE when a serial protocol is used to integrate to the TDM network.

IPY00074370

DMG2xxxDTIx

Load balancing does not use each channel in the VoIP Host Group.

IPY00074348

DMG2xxxDTIx

Add support for sending Network Specific Facility (NSF) IE for ISDN 5ESS.

IPY00074296

DMG2xxxDTIx

On a VoIP to TDM call where the TDM side disconnects during call setup a “Server Timeout” error will be generated on the next call in additional scenarios.

IPY00074308

DMG2xxxDTIx

Gateway would become unresponsive after about 2 weeks of run time and all calls would go ring no answer.

IPY00074326

DMG1xxx

When the there is no Name or Number information on TDM-to-IP calls, “anonymous” should be used in the INVITE sent to the VoIP endpoint.

IPY00074342

DMG2xxxDTIx

The presentation indicator byte is not provided in the calling name when a DMS-100 is connected to a NI-1 PSTN switch.

IPY00074343

ALL

A limited amount of MWIs are executed before the gateway runs out of resources.

 

Release 6.0 SU1

September 12, 2008

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.110.app

Gateway Application

|6.0.110|

T1E1_MR11.msd

DSP Firmware

|T1E1_MR11|

t1e1_6.0.110.fsh

Main CPU Boot

|6.0.110|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.110.app

Gateway Application

|6.0.110|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.110.fsh

Main CPU Boot

|6.0.110|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.110.app

Gateway Application

|6.0.110|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.110.fsh

Main CPU Boot

|6.0.110|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.110.app

Gateway Application

|6.0.110|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.110.fsh

Main CPU Boot

|6.0.110|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.110.app

Gateway Application

|6.0.110|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.110.fsh

Main CPU Boot

|6.0.110|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

FR2972

ALL

Added support for transporting DTMF digits between the Gateway and the VoIP endpoints via out-of-band call control messages in SIP.

FR3177

DMG2xxxDTIx

DMG100xLS

Add support for configurable feature code for transfer setup.

FR3031

DMG2xxxDTIx

DMG100xLS

DMG1008DNI

Add support for remote disconnect packet on MD110 serial protocol.

FR3181

DMG2xxxDTIx

Add support for using the CPID from the SIP REFER message on ISDN.

FR3272

DMG2xxxDTIx

Add support to provide calling and called type of number (Default, Unknown, International, National, Network Subscriber, Abbreviated or Reserved)  and calling and called number plan (Default, Unknown, ISDN_E.164, Data_X.121, Telex_F69, Standard, Private, or Reserved) on a per unit basis.

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074252

All

A space is appended to the end of the common name of a certificate was causing calls to fail when TLS is enabled.

IPY00043905

DMG1008RLMDNI

The ADEPT parser in the Gateway is not properly interpreting the rules that include a single literal character.

IPY00043403

All

The Gateway rejects MWI requests that use string "Yes" instead of 'yes' in a NOTIFY message.

IPY00043904

DMG100xLS

The Gateway incorrectly disconnects a VoIP-to-TDM call when the far end answers the call if the Gateway is connected to a NT1+ device.

IPY00043960

DMG2xxxDTIx

The Gateway delays starting media after an unsupervised transfer is performed to a TDM destination on a VoIP-to-TDM call when the Gateway is connected to an ISDN protocol.

IPY00043906

DMG2xxxDTIx

When the Gateway is connected to a Nortel Option 61c / 11c PBX and is configured to use the DMS100 protocol, the user will not be able to make or receive calls due to packet decoding on the D-Channel.

IPY00043967

DMG2xxxDTIx

No called party is available from IP to TDM when “SIP” is used in the From header because the gateway was case sensitive and did not recognize capitalized “SIP”.

IPY00043909

All

The Gateway requires a reboot if the user removes the MWI FAC setting. The reboot is required even though the Gateway does not inform the user to reboot.

IPY00043976

DMG2xxxDTIx

Under a heavy load of MWI traffic from IP to TDM, the PBX stops processing MWI requests from the Gateway when connected to a DMS100 PBX running ISDN NI-2 and cannot process simultaneous messages requests.

IPY00043959

DMG100xLS

FSK data is not being completely recognized because TCID type 3 is not supported.

IPY00043910

All

The Gateway experiences degradation in performance if the Gateway is requested to send many SIP messages over TCP to an IP endpoint (e.g. VoIP endpoint) that does not exist.

IPY00043919

DMG2xxxDTIx

The Gateway gets into a state where it will continually retry failed VoIP-to-TDM routes if the initial route fails due to a Redirect request from the TDM network.

IPY00043918

DMG2xxxDTIx

VoIP-to-TDM calls fail if the TDM network sends the Gateway a Redirect and the VoIP Host Address in the Routing Table is not '*'.

IPY00043992

DMG100xLS

IP to TDM calls are connecting before the TDM call is actually answered.

IPY00044244

DMG2xxxDTIx

"No Channels Available" alarm is generated when the consultation call is created on a different span than the original span because the first span has no channels available and there are channels available on a different span.

IPY00044360

DMG2xxxDTIx

The Gateways generates a red alarm on ISDN during the midnight routine on a Nortel Meridian.

IPY00044694

All

Browse buttons overlap a cell in the table on the Certificate page in Firefox.

IPY00044407

All

Hidden outbound fields are not visible in Firefox.

IPY00044697

All

On the router test page for VoIP Inbound, the VoIP endpoint and port cannot be entered.

IPY00044698

All

In Firefox the Router and TDM test pages display “Requesting Data From Gateway”.

IPY00044411

All

When VoIP Fault Tolerance is enabled the Gateway will not advance to the next host group. Busy or Not Available are reported and no connection to the next endpoint is attempted.

IPY00044449

DMG2xxxDTIx

Boot sequence countdown is not displayed properly to the debug terminal.

IPY00044370

DMG2xxxDTIx

T1 NI-2 A-LAW is not supported.

IPY00044371

DMG2xxxDTIx

When an INVITE with Replaces is received the call handle is unknown.

IPY00044479

All

Contact header is not present in SIP 202 REFER response.

IPY00044340

DMG2060DTIx

DMG2120DTIx

Alarm is generated when a transfer is successfully completed across spans.

IPY00074216

DMG2xxxDTIx

Data abort exception is generated when redirecting name is manipulated through the routing table and a call is made from VoIP to TDM.

IPY00074213

All

When a VoIP to TDM call receives a redirect request after the call information is manipulated through the routing table, the call log is incorrect for call manipulation on redirected TDM routing.

 

Release 6.0

May 9, 2008

Dialogic® Media Gateway models DMG2030DTI, DMG2060DTI, DMG2120DTI (T1/E1)

      DMG2060DTIS, DMG2120DTIS (T1/E1 with Survivability) Requires:

File

Description

Version

t1e1_6.0.103.app

Gateway Application

|6.0.103|

T1E1_MR11.msd

DSP Firmware

|T1E1_MR11|

t1e1_6.0.103.fsh

Main CPU Boot

|6.0.103|

T1_LS_Cfg_Avaya8500.ini

Configuration file containing settings for Avaya 8500 T1-CAS Loop-Start

-

T1_LS_Cfg_Hicom300E.ini

Configuration file containing settings for Hicom 300E T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IMX.ini

Configuration file containing settings for NEC2400IMX T1-CAS Loop-Start

-

T1_LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC2400IPX T1-CAS Loop-Start

-

T1_LS_Cfg_LucentG3.ini

Configuration file containing settings for Lucent G3 T1-CAS Loop-Start

-

 

Dialogic® Media Gateway models DMG1004LS, DMG1008LS (Analog) Requires:

File

Description

Version

ls_6.0.103.app

Gateway Application

|6.0.103|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

ls_6.0.103.fsh

Main CPU Boot

|6.0.103|

LS_Cfg_Alcatel.ini

Configuration file containing settings for Alcatel PBX

-

LS_Cfg_Hicom300E.ini

Configuration file containing settings for HiCom 300 PBX (North America)

-

LS_Cfg_Hicom300ECS.ini

Configuration file containing settings for HiCom 300 PBX(Europe)

-

LS_Cfg_Mitel.ini

Configuration file containing settings for Mitel PBX

-

LS_Cfg_LucentDefinity.ini

Configuration file containing settings for Lucent Definity PBX

-

LS_Cfg_ATTSys25.ini

Configuration file containing settings for ATT System 25 PBX

-

LS_Cfg_NEC2400IPX.ini

Configuration file containing settings for NEC 2400 IPX PBX

-

 

Dialogic® Media Gateway models DMG1008MTLDNI (Mitel) Requires:  

File

Description

Version

mtl_6.0.103.app

Gateway Application

|6.0.103|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.103.fsh

Main CPU Boot

|6.0.103|

MTLDNI_Cfg_Mitel.ini

Tone Definition config file for Mitel PBX

-

 

Dialogic® Media Gateway models DMG1008RLMDNI (Rolm) Requires:  

File

Description

Version

mtl_6.0.103.app

Gateway Application

|6.0.103|

rrun_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

mtl46.lca

Telephony Interface Firmware

4.6

mtl_6.0.103.fsh

Main CPU Boot

|6.0.103|

RLMDNI_Cfg_Rolm.ini

Tone Definition config file for ROLM PBX

-

 

Dialogic® Media Gateway models DMG1008DNI (DNI) Requires:  

File

Description

Version

ami_6.0.103.app

Gateway Application

|6.0.103|

run_910FskEcho.dsp

DSP Firmware

|9.1 w/Fax|

inim653.iap

Telephony Interface Application

6.53

iNim190.ilc

Telephony Interface Firmware

Platform 3 Build 190

iNim60.ibt

Telephony Interface Boot

6.0

ami_6.0.103.fsh

Main CPU Boot

|6.0.103|

DNI_Cfg_Generic.ini

Tone Definition config file (generic)

-

DNI_Cfg_Hicom300E.ini

Tone Definition config file (DNI Hicom Optiset 300E 'European')

-

DNI_Cfg_Lucent.ini

Configuration file containing Adept rules for Avaya 7434ND and 8434 phones

-

 

Added Features:

FR #

Dialogic® Media Gateway Model

Description

FR2633

All

The Gateway has been updated to support TDM-to-IP MWIs. Specifically, the DMG1000/DMG2000 will notify the specified VoIP endpoint when the gateway receives an indication from the TDM network that the VoIP endpoints message waiting indicator has been updated (set or cleared).

FR2838

All

The Gateway has been updated to support the VoIP Failover and Load Balancing within the Dial Plan. This allows users to create Failover/Load Balancing rules on a per route basis.

FR2911

DMG2xxxDTIx

The Gateway has been updated to allow users to configure the "Telephony Port Interface Side" parameter (Network Side or Terminal Side) on a per span basis for all T1/E1 ISDN protocols.

FR3013

DMG2xxxDTIx

The Gateway has been updated to support the ISDN Divert message and reroute the VoIP-to-TDM call to the TDM destination identified by the Divert message.

FR3082

All

The Gateway has been updated to include support for the 'ext' attribute on VoIP-to-TDM calls. Specifically, When the Gateway receives a 'ext' attribute as part of a VoIP-to-TDM call, the number contained in the 'ext' field becomes the number to dial.

 

Bug Fixes:

Defect #

Dialogic® Media Gateway Model

Description

IPY00074224

IPY00043928

IPY00074218

IPY00074274

IPY00043345

DMG2xxxDTI

The Gateway may prematurely disconnect a VoIP-to-TDM call if the network does not send a PROCEEDING or a SETUP_ACK in response to the Gateway sending a SETUP message.

IPY00042608

All

The Gateway does not echo the entire Referred-By header received in the REFER message during a transfer in the resulting Re-INVITE it generates.

IPY00042341

All

The Gateway may parse the timestamp header of a received SIP message incorrectly resulting in the Gateway returning a 400 "Bad Request" response.

IPY00042224

All

If the Gateway receives a SIP 302 message from the VoIP endpoint with multiple targets included in the Contact header, the Gateway will not send an INVITE to the subsequent targets in the list if the first fails.

IPY00039679

DMG2xxxDTI

The Gateway does not support diversion information or MWI requests when connected to a E1 QSIG interface an Alcatel PBX that is configured for the ECMA format as opposed to the ISO format.

IPY00042202

DMG1008LS

The Gateway does provide the correct Call Party Information when using the Serial MCI link connected to a NEC PBX that is part of series of NEC switches connected using Fusion link.

IPY00042088

DMG2xxxDTI

The Gateway does not pass the Redirecting Party when configured for the E1 ETSI protocol.

IPY00042607

All

Over time, the Gateway may stop communicating over the SIP interface after the Gateway receives Re-INVITE requests that are subsequently cancelled.

IPY00042827

DMG1008LS

The Gateway allows the user to configure the unit to use the ETSI FSK protocol for gathering Call Party Information even though this protocol is not supported.

IPY00043339

 

Duplicate of IPY00043345.

IPY00042529

DMG2xxxDTI

On IP-to-TDM calls to a TDM phone that is busy, the Gateway responds with a 503 "Service Unavailable" message instead of a 486 "Busy Here" message when configured for an ISDN protocol

IPY00038091

All

The Gateway may not be able to reboot if serial data is received across the serial integration port while the Gateway is rebooting.

IPY00043898

All

The Gateway does not fully support Early Media (CIR IPY00043203)

IPY00043899

DMG2xxxDTI

The Gateway fails a Consult Transfer if there are no free channels on the span that the original call is on even if there are free channels on other spans connected to the Gateway  (CIR IPY00043008)

IPY00043900

All

The Gateway may stop sending audio if it receives a Re-INVITE followed by an ACK where the SDP information is included in the ACK but not in the Re-INVITE (CIR IPY00043477)

IPY00043901

All

The Gateway does not fully support Early Media (CIR IPY00042644)

 

Compatibility Notes:

Title

Description

Microsoft OCS - Voice Detection on ISDN

The Gateway may not send the SIP 200 OK response when the far end user answers the call until the user speaks on TDM-to-IP calls when using an ISDN protocol (e.g. QSIG, NI-2, etc.).

Microsoft OCS - Early Media

The Gateway is not compatible with the SIP Early Media feature as implemented on the Microsoft Mediation Server.

Norstar PBX DTMF

Norstar switches do not render DTMF digital station to digital station. This means that DTMF cannot be used to signal from a digital station to a DMG1000 port connected to a Norstar switch.

Avaya Legend PBX CPID

Avaya Legend switches do not provide redirecting call-party information when the call has been forwarded to a coverage-path to which the DMG1000 is a member. This means that DMG1000 will not be able to determine the called-party for inbound PBX calls that have been forwarded to a coverage-path.

Dial-Digit Relay Notes

There are 3 ways to achieve digit relay between the IP side and the TDM side. They are via the VoIP signal protocol, RFC2833 tones in RTP, or inband tones in RTP.

For VoIp signal protocol, SIP does not yet support this. Drafts are in early stages. Therefore, we do not generate/receive signal digit relay on SIP (even though it is still part of the configuration).

RTP digit relay, both inband-tone and RFC2833, works on SIP.
Most SIP devices will render an actual tone when they receive an RFC2833 digit event, but they don't have to.
The gateway will render an actual tone when it receives an RFC2833 digit event on SIP.

Inband-tone works on both SIP and H.323, since it is actually going through the voice channel. But, some devices will remove the inband-tone from the voice stream.

Type II (Post-Answer) CPID

TDM-to-VoIP calls: when VoIP endpoint answers, first few seconds of audio may be clipped because audio is squelched during transmission of Type II CPID from the switch. On switch side of the call, the caller still receives ring-back tone while the switch is playing the Type II CPID tones.